Pemco Lighting ProductsControls

P18131

Spec Sheet Features: Twist-Lock Cap Keeps Lights Off at all Times. Use to Disconnect Service for Temporary or Permanent Disabling of a Fixture with a Twist-Lock Receptacle. IP65 When Installed. UV-Stabilized Polycarbonate Cover. High Impact Polybutylene Terephthalate Base

compliance: IP-ratedfamily: Twist Lock Non-Shorting (Open) Capip rating: IP65voltage: 480Vlens material: polycarbonate

Cross-References

Top equivalents — 12 across 12 brands

Compare top 3
  • The Digital to Analog Converter (DAC) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

    • category
    • environment
    • voltage
    spec →
  • LumarkOA-RA1027partial

    Lumark® NFFLD Night Falcon Series

    • category
    • environment
    • voltage
    spec →
  • Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.

    • category
    • environment
    • voltage
    spec →
  • WaveLinxPLEpartial

    The WaveLinx Networked Relay Panel from Cooper Lighting Solutions consist of Relays and 0-10V dimming modules that is connected to the WaveLinx Area Controller through an Ethernet switch. The WaveLinx Networked Relay Panels are available in various enclosure sizes including emergency options, with capacity up to 64 latching relays and 64 dimming 0-10V channels.

    • category
    • environment
    • voltage
    spec →
  • Series 30 Rectifier | 6V-100VDC | 500A-10,000A

    • category
    • environment
    • voltage
    spec →
  • nLightRSIpartial

    The nLight AIR System Input Device (rSI) converts analog device outputs (0-10V) and dry contact outputs to wireless, nLight AIR broadcasts to control intelligent luminaires and other lighting control

    • category
    • environment
    • voltage
    spec →
  • LightGRID+ Wireless External Photocell Module Lighting

    • category
    • environment
    • voltage
    spec →
  • Sun Valley LightingGLSCpartial

    The GLS Series luminaire by Sun Valley Lighting features a traditional crowned prismatic borosilicate glass refracting lens with a corrosion-resistant cast aluminum base and decorative rungs. The luminaire base fitter has a 3” I.D. opening for tenon mounting, and comes in 2 design options. The LED Power Array offers symmetric radial distribution, with Type-III or Type-V distributions controlled by the refracting globe. High-power LEDs are available in Warm White (2700K, 3000K), Neutral White (4000K), and Cool White (5000K), with L93 lumen maintenance at 100,000 hours. The luminaire includes a 0-10V dimmable driver with surge protection and optional True Amber LEDs for wildlife-friendly lighting. BABA compliant. UL listed for wet location.

    • category
    • environment
    • voltage
    • lens
    • spec delta
    • voltage: 480V347480
  • Cree LightingTL7HVGpartial

    Twist-Lock Controller

    • category
    • environment
    • voltage
    spec →
  • The moon series has the high-performance solution for the most demanding applications within a unique design. With different precision refractive optical lens and an easy-install design, it can be used in many applications such as pedestrian street, factory, schools, garden, courtyard, hotel, parking lot, public parks etc.

    • category
    • environment
    • voltage
    • lens
    spec →
  • Advantage Lighting Solutions820partial

    Installation: Factory Install - Sensor integral to fixture

    • category
    • environment
    • voltage
    spec →
  • Assurance Emergency LightingL30-C-HVO-480partial

    30 Watts - Constant Power LED Emergency Driver- up to 4200 lumens - Title 20 CEC compliant- Class 1 Output (50-255 Vdc) 347- 480 VAC Input 12.6" L x 2.44" W x 2.05" H 50-255 Vdc output

    • category
    • environment
    • voltage
    spec →

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →