LIGHTGRID-WIRELESS-EXTERNAL-PHOTOCELL-MODULE-LIGHTING
LightGRID+ Wireless External Photocell Module Lighting
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Digital to Analog Converter (DAC) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.
- category
- environment
- voltage
- dimming
- spec →
Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.
- category
- environment
- voltage
- dimming
- spec →
The WaveLinx Networked Relay Panel from Cooper Lighting Solutions consist of Relays and 0-10V dimming modules that is connected to the WaveLinx Area Controller through an Ethernet switch. The WaveLinx Networked Relay Panels are available in various enclosure sizes including emergency options, with capacity up to 64 latching relays and 64 dimming 0-10V channels.
- category
- environment
- voltage
- dimming
- spec →
Series 30 Rectifier | 6V-100VDC | 500A-10,000A
- category
- environment
- voltage
- spec →
High bay aisleway lighting control is made simple with the HMRB 10 480 Series occupancy sensor. This unique sensor is line powered and enables direct switching of 480 VAC lighting loads. Designed to
- category
- environment
- voltage
- spec →
PIR High Bay 360° Sensor. (Individual). The HBS 300 (347-480V) High Bay Occupancy Sensor provides 360 degrees of occupancy based lighting control in 347/480 VAC, 60Hz high bay open area applications. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a high bay lighting fixture or junction box. The EM1 Extender Module is recommended if the knockout at the end of the fixture is located greater than 1/2” from the bottom edge of the fixture. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the HBS 300 (347-480V) is able to achieve 1416 switching zones.
- category
- environment
- voltage
- spec →
The Ephesus LumaSport 12 is engineered with precision optics and advanced glare control that minimizes light spill and sky glow. Designed for communities that value environmental stewardship and DarkSky compliance, the system delivers powerful illumination, reliable performance, and simplified installation through its remote power architecture.
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277-480V
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 480V → 277V/347V/480V
- spec →
The IOTA ILBHI CP20 HE SD HV is a UL Listed emergency LED driver for field and factory installation that allows a 347-480VAC fixture with 55-200VDC Non-Class 2 LED lighting loads to be used for both
- category
- environment
- voltage
- spec delta
- voltage: 480V → 347V/480V
The GLS Series luminaire by Sun Valley Lighting features a traditional crowned prismatic borosilicate glass refracting lens with a corrosion-resistant cast aluminum base and decorative rungs. The luminaire base fitter has a 3” I.D. opening for tenon mounting, and comes in 2 design options. The LED Power Array offers symmetric radial distribution, with Type-III or Type-V distributions controlled by the refracting globe. High-power LEDs are available in Warm White (2700K, 3000K), Neutral White (4000K), and Cool White (5000K), with L93 lumen maintenance at 100,000 hours. The luminaire includes a 0-10V dimmable driver with surge protection and optional True Amber LEDs for wildlife-friendly lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 480V → 347480
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Current Lighting
Full directory →53 rep agencies carry the Current HLI Brands line across 51 states. Pick your state.
Alabama AL2 agencies
Birmingham · Mobile
- Lighting PartnershipCurrent
Birmingham
Alaska AK2 agencies
- Arctic Sales AgencyCurrent
Statewide
- Ewing FoleyCurrent
Statewide
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR2 agencies
Statewide
- Curtis Stout, Inc.Current
Statewide
California CA5 agencies
- Lighting SystemsCurrent
Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
- D.Z. Cook CompanyCurrent
Sacramento · San Francisco
- Integrated LightingCurrent
Fresno · Ventura
- PLP SoCalCurrent
Los Angeles · Ventura
Colorado CO2 agencies
- The MH CompaniesCurrent
Statewide
- Fisher Lighting And ControlsCurrent
Statewide
Connecticut CT2 agencies
- illuminateCurrent
Statewide
Statewide
Delaware DE1 agency
- DiversifiedCurrent
Statewide
District of Columbia DC2 agencies
- One Source AssociatesCurrent
Statewide
- Commercial Lighting SalesCurrent
Statewide
Florida FL4 agencies
Panhandle
Miami
- Florida Lighting AssociatesCurrent
Fort Myers · Jacksonville · Orlando · Tampa
- FRM Lighting & ControlsCurrent
Fort Myers · Jacksonville · Miami · Orlando · Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.