SERIES-30-RECTIFIER-6-V-100-VDC-500-A-10000-A
Series 30 Rectifier | 6V-100VDC | 500A-10,000A
Cross-References
24 equivalents across 15 brands
Compare top 3 →- spec →
The Digital to Analog Converter (DAC) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.
- category
- environment
- voltage
- spec →
Take smart lighting to the next level with the UNB Network Lighting Control Telecell, the world’s most deployed wireless controller, proudly powered by Telensa. With over 2 million nodes installed globally and more than a decade of proven performance, this compact powerhouse is no larger than a standard photocell and is available for every luminaire type, including decorative fixtures. Engineered for reliability and scalability, the Telecell provides robust control and monitoring capabilities across expansive networks.
- category
- environment
- voltage
- spec →
The WaveLinx Networked Relay Panel from Cooper Lighting Solutions consist of Relays and 0-10V dimming modules that is connected to the WaveLinx Area Controller through an Ethernet switch. The WaveLinx Networked Relay Panels are available in various enclosure sizes including emergency options, with capacity up to 64 latching relays and 64 dimming 0-10V channels.
- category
- environment
- voltage
- spec →
High bay aisleway lighting control is made simple with the HMRB 10 480 Series occupancy sensor. This unique sensor is line powered and enables direct switching of 480 VAC lighting loads. Designed to
- category
- environment
- voltage
- spec →
LightGRID+ Wireless External Photocell Module Lighting
- category
- environment
- voltage
- spec →
PIR High Bay 360° Sensor. (Individual). The HBS 300 (347-480V) High Bay Occupancy Sensor provides 360 degrees of occupancy based lighting control in 347/480 VAC, 60Hz high bay open area applications. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a high bay lighting fixture or junction box. The EM1 Extender Module is recommended if the knockout at the end of the fixture is located greater than 1/2” from the bottom edge of the fixture. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the HBS 300 (347-480V) is able to achieve 1416 switching zones.
- category
- environment
- voltage
- spec →
The Ephesus LumaSport 12 is engineered with precision optics and advanced glare control that minimizes light spill and sky glow. Designed for communities that value environmental stewardship and DarkSky compliance, the system delivers powerful illumination, reliable performance, and simplified installation through its remote power architecture.
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277-480V
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277V/347V/480V
- spec →
The IOTA ILBHI CP20 HE SD HV is a UL Listed emergency LED driver for field and factory installation that allows a 347-480VAC fixture with 55-200VDC Non-Class 2 LED lighting loads to be used for both
- category
- environment
- voltage
- spec delta
- voltage: 480V → 347V/480V
- spec →
The GLS Series luminaire by Sun Valley Lighting features a traditional crowned prismatic borosilicate glass refracting lens with a corrosion-resistant cast aluminum base and decorative rungs. The luminaire base fitter has a 3” I.D. opening for tenon mounting, and comes in 2 design options. The LED Power Array offers symmetric radial distribution, with Type-III or Type-V distributions controlled by the refracting globe. High-power LEDs are available in Warm White (2700K, 3000K), Neutral White (4000K), and Cool White (5000K), with L93 lumen maintenance at 100,000 hours. The luminaire includes a 0-10V dimmable driver with surge protection and optional True Amber LEDs for wildlife-friendly lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- spec delta
- voltage: 480V → 347480
Features Rugged A383 Cast Aluminum housing Available in 45W-150W power packages 140lm/w efficacy High Power LUMILED™ LED Engines Optional 3500K-6500K CCT Available with 120-277VAC or 347-480VAC […]
- category
- environment
- voltage
- spec delta
- voltage: 480V → 120V/277V/347V/480V
The OSQW™ wall mount luminaire features NanoComfort® Technology which provides superior glare reduction and visual comfort with high-efficiency illumination delivered precisely where it is needed. Designed for easy installation with through-wired or conduit entry from the top, bottom, sides and rear. Plus, emergency battery back-up option is available.
- category
- environment
- voltage
- spec delta
- voltage: 480V → 120V/277V/347V/480V
- spec →
Service outdoor, industrial, and demanding environments with FieldSET 180W 277-480V linear programmable LED driver. Configure output current and dimming level requirements, with one handheld,
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277V/480V
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277V/347V/480V
- spec →
Cellular lighting controller with GPS, auto-setup, and tilt sensing for smart streetlight control
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277V/480V
High bay lighting control is made simple with the RMR 6 480 Series occupancy sensor. This unique sensor is line powered and enables direct switching of 480 VAC lighting loads. Designed to recess
- category
- environment
- voltage
- spec →
The GKO Gekko features a sleek wedge form factor in two housing sizes, with a wide range of CCT and lumen package options. Complete with sensor and battery options, the GKO produces zero uplight in any configuration for maximum versatility.
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277V/347V/480V
- spec →
The IOTA ILBHI CP30 HE SD HV is a UL Listed emergency LED driver for field and factory installation that allows a 347-480VAC fixture with 55-250VDC Non-Class 2 LED lighting loads to be used for both
- category
- environment
- voltage
- spec delta
- voltage: 480V → 347V/480V
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277V/347V/480V
- spec →
The Cellular Node Network Lighting Controller from Trellix Infrastructure brings effortless smart lighting integration to streetlights from virtually any manufacturer. Designed for plug-and-play simplicity, it offers true automatic commissioning, connecting to mobile networks, locating itself via onboard GPS, and instantly syncing asset data to your lighting management system.
- category
- environment
- voltage
- spec delta
- voltage: 480V → 277V/480V
High bay lighting control is made simple with the RMR 50 480 Series occupancy sensor. This unique sensor is line powered and enables direct switching of 480 VAC lighting loads. Designed to recess
- category
- environment
- voltage
- spec →
The ILBHI CP10 is a 10-Watt Emergency LED Driver for 347-480 VAC Luminaires for Class 2 LED Loads. Features Constant Power output for non-diminishing emergency illumination for the full runtime. CA
- category
- environment
- voltage
- spec delta
- voltage: 480V → 347V/480V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →