Fifth LightControls

Fifth Light Digital to Analog Converter

The Digital to Analog Converter (DAC) is a lighting control device used to control any standard 0-10V current sourcing dimmable ballast/driver. It allows dimming control by sending 0-10V dimming and on/off commands to the DAC via the Cooper Lighting two wire communications bus.

family: Fifth Light Digital to Analog Converterdimming: 0-10Vvoltage: 480V

Cross-References

Top equivalents — 12 across 10 brands

Compare top 3
  • Series 30 Rectifier | 6V-100VDC | 500A-10,000A

    • category
    • environment
    • voltage
    spec →
  • nLightRSIpartial

    The nLight AIR System Input Device (rSI) converts analog device outputs (0-10V) and dry contact outputs to wireless, nLight AIR broadcasts to control intelligent luminaires and other lighting control

    • category
    • environment
    • voltage
    • dimming
    spec →
  • SensorSwitchHMRB-10-480partial

    High bay aisleway lighting control is made simple with the HMRB 10 480 Series occupancy sensor. This unique sensor is line powered and enables direct switching of 480 VAC lighting loads. Designed to

    • category
    • environment
    • voltage
    spec →
  • LightGRID+ Wireless External Photocell Module Lighting

    • category
    • environment
    • voltage
    • dimming
    spec →
  • SteinelHBS 300 (347-480V)partial

    PIR High Bay 360° Sensor. (Individual). The HBS 300 (347-480V) High Bay Occupancy Sensor provides 360 degrees of occupancy based lighting control in 347/480 VAC, 60Hz high bay open area applications. The sensor performs at a wide range of mounting heights, up to 45 feet. It mounts directly to a high bay lighting fixture or junction box. The EM1 Extender Module is recommended if the knockout at the end of the fixture is located greater than 1/2” from the bottom edge of the fixture. With three highly sensitive pyroelectric detectors and a multi-segmented lens, the HBS 300 (347-480V) is able to achieve 1416 switching zones.

    • category
    • environment
    • voltage
    spec →
  • The IOTA ILBHI CP20 HE SD HV is a UL Listed emergency LED driver for field and factory installation that allows a 347-480VAC fixture with 55-200VDC Non-Class 2 LED lighting loads to be used for both

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 480V347V/480V
    spec →
  • Sun Valley LightingGLSCweak

    The GLS Series luminaire by Sun Valley Lighting features a traditional crowned prismatic borosilicate glass refracting lens with a corrosion-resistant cast aluminum base and decorative rungs. The luminaire base fitter has a 3” I.D. opening for tenon mounting, and comes in 2 design options. The LED Power Array offers symmetric radial distribution, with Type-III or Type-V distributions controlled by the refracting globe. High-power LEDs are available in Warm White (2700K, 3000K), Neutral White (4000K), and Cool White (5000K), with L93 lumen maintenance at 100,000 hours. The luminaire includes a 0-10V dimmable driver with surge protection and optional True Amber LEDs for wildlife-friendly lighting. BABA compliant. UL listed for wet location.

    • category
    • environment
    • voltage
    • dimming
    • spec delta
    • voltage: 480V347480
    spec →
  • LEDRAYSHCOV2SERIESweak

    Features Rugged A383 Cast Aluminum housing Available in 45W-150W power packages 140lm/w efficacy High Power LUMILED™ LED Engines Optional 3500K-6500K CCT Available with 120-277VAC or 347-480VAC […]

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 480V120V/277V/347V/480V
  • Cree LightingOSQWweak

    The OSQW™ wall mount luminaire features NanoComfort® Technology which provides superior glare reduction and visual comfort with high-efficiency illumination delivered precisely where it is needed. Designed for easy installation with through-wired or conduit entry from the top, bottom, sides and rear. Plus, emergency battery back-up option is available.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 480V120V/277V/347V/480V
  • Service outdoor, industrial, and demanding environments with FieldSET 180W 277-480V linear programmable LED driver. Configure output current and dimming level requirements, with one handheld,

    • category
    • environment
    • voltage
    • dimming
    • spec delta
    • voltage: 480V277V/480V
    spec →
  • SensorSwitchRMR-6-480partial

    High bay lighting control is made simple with the RMR 6 480 Series occupancy sensor. This unique sensor is line powered and enables direct switching of 480 VAC lighting loads. Designed to recess

    • category
    • environment
    • voltage
  • The IOTA ILBHI CP30 HE SD HV is a UL Listed emergency LED driver for field and factory installation that allows a 347-480VAC fixture with 55-250VDC Non-Class 2 LED lighting loads to be used for both

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 480V347V/480V
    spec →

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →

Local Reps

Who reps Fifth Light

Full directory →

43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.

+41 more states in the full directory →

Line cards are directional — confirm coverage with the agency before routing a spec.