NEX712LED
Combination Dual Head Emergency / Exit fixture offers the ultimate in flexibility and options. During normal operation, the exit sign operates on long life LED sources for brilliant, maintenance-free illumination. During emergency operation, the exit sign and dual LED heads operate 90 minutes under battery power. BODY Injection-molded high impact and scratch resistant corrosion proof and flame retardant housing MOUNTING Suitable for wall or ceiling mounting. Canopy and mounting hardware included. BATTERY Luminaire includes 3.6V 900mAh battery to power an additional remote emergency light. LABELS AND LISTINGS cULus Listed for Damp locations
Cross-References
30 equivalents across 18 brands
Compare top 3 →- spec →
Featuring LED exit and LED lightpipe emergency lighting in one self-contained, compact design.
- category
- subcategory
- environment
- voltage
- lumens
- spec delta
- voltage: 277V → UNV
- spec →
ECC This product series has been discontinued.
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → UNV
- cct: 5700K → 5000K
- spec →
Ideal for wet location areas requiring exit signs for AC only or battery back-up power that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
This TCL Series ENTER | EXIT (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. It has a corrosion resistant, all-weather cabinet and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
Single/double face configurable with supplied faceplate. 120V/277V. Sturdy ABS plastic housing. Side, top or back mounting. cUL or ETL listed.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel
- category
- environment
- voltage
- spec delta
- wattage: 3.8W → 2W
- spec →
The Rival RXD Series Die-cast Exit features aluminum housing with canopy and a brushed aluminum face. It has dual voltage input to meet a variety of needs. Long-life, energy-efficient LED lamps reduce energy costs and eliminate routine lamp maintenance. The premium sealed nickel cadmium batteries have a 15-year life expectancy. With ceiling, wall and end mounting the Rival RXD Series can meet any design needs. Universal, field-selectable chevrons add versatility. This series is UL damp location listed (indoor).
- category
- environment
- voltage
- spec →
The LPXW series provides a UL924 compliant solution for outdoor exit requirements. The fixture is wet location listed with a temperature rating of (- 20°C to 50°C ). The UV stabilized polycarbonate housing is available in white, grey or black with red or green Exit letters. Labor savings self-diagnostics that perform required monthly and yearly testing are standard for the self-powered exits.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.
- category
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 3.8W → 2W
- spec →
LED EMERGENCY DECORATIVE Black or white finish. 1 watt per head. Options include self-diagnostics.
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120-277V
- wattage: 3.8W → 1W
- spec →
The EXIT/IP from H.E. Williams, Inc. is a NEMA 4X, NSF, and IP66-rated LED exit sign engineered for food service and demanding environments. With corrosion-resistant construction, tamper-resistant hardware, and emergency battery options, it delivers dependable life safety performance.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- cct: 5700K → 2700K
- wattage: 3.8W → 36W
- spec →
QMLED Emergency Exit Sign - Magellan QM LED Exit-Unit Combo
- category
- subcategory
- environment
- spec delta
- wattage: 3.8W → 1.5W
- spec →
This TCL Series EXIT w/ Arrow (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
ILLUMINATION • Ultra bright, energy efficient, long life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Unique bi-color LED indicator light alerts occupant on battery condition (Green-normal, Red-check battery). • 4.8V long life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to
- category
- subcategory
- environment
- spec →
The Chloride Patron LED Emergency Unit is a low profile unit offers many options for indoor or outdoor lighting applications. Its stylish design is an excellent choice as an architectural grade emergency lighting unit for illuminating an interior or exterior path of egress.
- category
- environment
- voltage
- spec delta
- lumens: 150 → 700
- cct: 5700K → 4500K
Polycarbonate weather proof clear shield for LED Exit Signs UL Listed for wet location
- category
- subcategory
- environment
- spec →
The Marathon Series Exits are designed for architectural excellence and minimal presence. The crystal clear wedge-shaped panel allows architectural details to shine through while providing excellent light distribution and exit visibility. Long-life, energy-efficient LED lamps reduce energy costs and eliminate routine lamp maintenance.
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Nora Lighting
Full directory →3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.
Iowa IA1 agency
Statewide
Nebraska NE1 agency
Omaha
Nevada NV1 agency
Las Vegas
Wisconsin WI1 agency
- ERI / illuminateCurrent
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.