VEX-WPCR
General Purpose · Exit Combo · Outdoor Rated · CEC Compliant
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The EXIT/IP from H.E. Williams, Inc. is a NEMA 4X, NSF, and IP66-rated LED exit sign engineered for food service and demanding environments. With corrosion-resistant construction, tamper-resistant hardware, and emergency battery options, it delivers dependable life safety performance.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
A compact exit sign with dual color LEDs, allows end user to change the color from Red to Green in the field. The exit sign includes a maintenance-free NiCad battery to power the fixture during power loss for 90 minutes on a full charge. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. LED exits are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. LED Source: Internal switch changes the color of LEDs from Green to Red Colored Filters: Green and Red Filters are included with each sign Face: Double Face and Blank Face included Mounting: Wall, Side, or Ceiling Mounted. Mounting hardware and canopy included Input Voltage: 120V/277V input Battery: 3.6V 300mAh NiCad (nickel-cadmium) Testing: The manual test switch and indicator light are located on the bottom of the sign Accessories: NEG-60 (Wet Location Enclosure for Wall Mounting only) Listings: UL Listed for Damp Locations NFPA Certified to the energy efficiency standards of California Title 20
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- wattage: 1.2W → 3W
- spec →
Ideal for wet location areas requiring exit signs for AC only or battery back-up power that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 1.2W → 5W
- spec →
This TCL Series ENTER | EXIT (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. It has a corrosion resistant, all-weather cabinet and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- wattage: 1.2W → 36W
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
Single/double face configurable with supplied faceplate. 120V/277V. Sturdy ABS plastic housing. Side, top or back mounting. cUL or ETL listed.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel
- category
- environment
- voltage
- spec →
The Rival RXD Series Die-cast Exit features aluminum housing with canopy and a brushed aluminum face. It has dual voltage input to meet a variety of needs. Long-life, energy-efficient LED lamps reduce energy costs and eliminate routine lamp maintenance. The premium sealed nickel cadmium batteries have a 15-year life expectancy. With ceiling, wall and end mounting the Rival RXD Series can meet any design needs. Universal, field-selectable chevrons add versatility. This series is UL damp location listed (indoor).
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →