EMERGENCY LIGHT - SERIES EMD
LED EMERGENCY DECORATIVE Black or white finish. 1 watt per head. Options include self-diagnostics.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
PFX 5503 Thin Thermoplastic EXIT Sign. Ultra bright, energy efficient, long life Red or Green LEDs. Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. 1.2V long life, maintenance-free, rechargeable NiCd battery (EM models only). Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- category
- environment
- voltage
- spec →
Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.
- category
- environment
- voltage
- spec delta
- wattage: 1W → 2W
- spec →
The NYC compliant AtLite AUX series are designed for minimal presence in architecturally significant surroundings. The ordering and installation processes are greatly simplified as all housing and lens options are included. In addition, Eagle Eye self-diagnostics are standard on all self-powered units. Long life LED electronics coupled with nickel cadmium battery technology greatly reduces maintenance.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120-277V → 277V
- spec →
Rugged 20 gauge steel luminaires comply with the latest New York City codes and performance standards. Stencil letters are 8" high with 1" stroke, with a minimum of 100' viewing distance rating as required by UL 924 standard. FEATURES Meets City of New York Emergency Code requirements 20-gauge steel housing with white powder coating Fully-illuminated 8" letters with 1" stroke Includes single and double faces Removable knockout chevron directional arrows Illuminates for 90 minutes during power failure Universal mounting (Wall or Side) HOUSING 20-gauge steel housing includes an additional face for a double-sided exit sign. Adjustable emergency heads feature a unique twist-locking collar. Low profile snap-together. Snap-out knockouts for wiring. MOUNTING Steel case includes two knockouts for side of wall mounting (hardware included). LABELS AND LISTINGS 5 year limited warranty Meets City of New York emergency code requirements (NY Approved) NFPA-101 cULus Listed for damp locations
- category
- environment
- voltage
- spec delta
- wattage: 1W → 3W
- spec →
The Chloride AMS is an LED Architectural Message Sign with 4 faceplate styles and variety of mounting accessories. It is ideal for providing informational and warning messages in a wide range of architectural spaces. Used in Hospitals, X-ray Suites and other medical settings where it is critical to know if a space is occupied or not accesible to personnel.
- category
- environment
- voltage
- spec delta
- wattage: 1W → 9W
- spec →
The DLTLC from Holophane is a wet location low-profile combination of exit and emergency light. Available with red or green letters. It is ideal to safely illuminate the path of egress above-the-door
- category
- environment
- voltage
- housing
- spec delta
- wattage: 1W → 5W
- spec →
This TCL Series EXIT HERE w/Down Arrows (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →