ERH4WPSD
The ERHWP-SD Series LED Weather Resistant Remote lamps are designed to work with any of NICOR’s 3.6VDC self diagnostic LED Exit combos and emergency lighting units with remote capability. With a weather-resistant enclosure, this sleek, contemporary design offers fully adjustable heads that complement any environment. The ERHWP Remote lamps are available in single or double head configurations.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Litetronics LED Exit Sign Combo Light Unit delivers dependable, high visibility egress illumination with durable housing and dual adjustable square lamps. Delivering crisp 6500K daylight illumination while consuming only 6W, ensuring high efficiency and reliable performance, and UL924 certification ensures full life safety compliance. Installs fast for wall or ceiling mounting, with left/right punch-out arrows, removable faceplates for double-face configuration, and 2 adjustable square lamps. The Litetronics LED Exit Sign Combo Light Unit offers long term value and robust performance across offices, retail, hospitality, schools, hospitals, multi-family, and more.
- category
- subcategory
- environment
- CCT
- CRI
- spec delta
- wattage: 1.3W → 6W
- spec →
EXIT/EM/CHICAGO features energy-efficient, long-lasting LEDs and two 5.3-watt Chicago-approved adjustable lamp heads.
- category
- subcategory
- environment
- spec delta
- wattage: 1.3W → 10W
- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- spec delta
- cct: 6500K → 2700K
- wattage: 1.3W → 36W
- spec →
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
- spec →
LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant
- category
- subcategory
- environment
- spec delta
- wattage: 1.3W → 2.2W
- spec →
Single clear acrylic face or Double mirrored acrylic faced LED Exit Signs Green or Red letters and arrows 120V/277V with 90 min. emergency battery backup 24 hrs rechargeable after been discharged Test switch and charge rate indicator Wall or ceiling mount cUL listed CA Title 20 Certified
- category
- subcategory
- environment
- spec →
QMLED Emergency Exit Sign - Magellan QM LED Exit-Unit Combo
- category
- subcategory
- environment
- wattage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps NICOR Lighting
Full directory →27 rep agencies carry the Nicor Lighting line across 45 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
Fresno · Sacramento · San Francisco
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Commercial Lighting SalesCurrent
Statewide
Florida FL2 agencies
Panhandle
Fort Myers · Jacksonville · Miami · Orlando · Tampa
+35 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.