EDGLIT
Single clear acrylic face or Double mirrored acrylic faced LED Exit Signs Green or Red letters and arrows 120V/277V with 90 min. emergency battery backup 24 hrs rechargeable after been discharged Test switch and charge rate indicator Wall or ceiling mount cUL listed CA Title 20 Certified
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- voltage
- spec →
LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant
- category
- subcategory
- environment
- voltage
- spec →
This SBL Series NOT AN EXIT indoor, blankout, LED backlit sign is designed with a matrix of energy efficient LEDs illuminating a block-style message. The sign features blankout technology that only displays the sign message when illuminated.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → 120-277VAC
- spec →
EXIT/EM/CHICAGO features energy-efficient, long-lasting LEDs and two 5.3-watt Chicago-approved adjustable lamp heads.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → UNV
- spec →
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
- spec →
QMLED Emergency Exit Sign - Magellan QM LED Exit-Unit Combo
- category
- subcategory
- environment
- spec →
The All-Pro APXH7 series is a polycarbonate LED exit with remote capacity. The series is compatible with the APWR1 and APWR2, 3.6 volt LED remotes. It is available with red or green letters. The APXH7R2 and APXH7G4 will power two LED remote heads while the APXH7R4 and APXH7G4 will power four remote heads. These exits are universal mount (ceiling, wall or end) and are field configurable for single or double face.
- category
- environment
- voltage
- spec →
INCANDESCENT STEEL - NEW YORK CITY New York City compliant. Configurations available: • 6 volt, 2 heads/9 watt ea • 6 volt, 3 heads/9 watt ea (with 2 heads/remote capacity 9 watts) • 12 volt, 3 heads/12 watt ea/remote capacity 14 watts (with 2 heads/remote capacity 26 watts) Black or white finish.
- category
- environment
- voltage
- spec →
PFX 5503 Thin Thermoplastic EXIT Sign. Ultra bright, energy efficient, long life Red or Green LEDs. Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. 1.2V long life, maintenance-free, rechargeable NiCd battery (EM models only). Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- category
- environment
- voltage
- spec delta
- voltage: 120V/277V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.