HeyeBeamPowered by Heye Lab
Genlyte SolutionsExit Signs

CCSE Series - Chicago Steel Exit

The Chicago Approved CCSE Series is an energy saving, high output LED Exit. The CCSE Series is constructed of rugged steel for wall, ceiling or end mount applications.

subcategory: led_exit_signfamily: CCSE Series - Chicago Steel Exit
View at Genlyte Solutions →

Cross-References

Top equivalents — 12 across 12 brands

Compare top 3 →
  • H.E. WilliamsEXIT-EM-CHICAGOpartial

    EXIT/EM/CHICAGO features energy-efficient, long-lasting LEDs and two 5.3-watt Chicago-approved adjustable lamp heads.

    • category
    • subcategory
    • environment
    spec →
  • IsoliteCLPpartial

    The CLP Chicago Approved LED Exit Sign utilizes energy-efficient white LEDs. The sign's housing unit is made of 20 gauge steel and allows for universal mounting.

    • category
    • subcategory
    • environment
    spec →
  • LithoniaLHX-NY-EXIT-COMBOpartial

    The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount

    • category
    • subcategory
    • environment
    spec →
  • Advantage Environmental LightingX12USTEELLEDEXITSIGNpartial

    ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board

    • category
    • subcategory
    • environment
    spec →
  • Nora LightingNX617LEDpartial

    LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant

    • category
    • subcategory
    • environment
    spec →
  • ChlorideEEX46Epartial

    The Chloride 46 Line Series LED exit sign offers a slender die cast design that allows these exits to be unobtrusive, while providing excellent visibility required for emergency units.

    • category
    • subcategory
    • environment
    spec →
  • ExitronixCTC900Epartial

    Exit Signs · Exitronix · Specification · CEC Compliant · Connecticut Offering · Connecticut Offering

    • category
    • subcategory
    • environment
    spec →
  • ELCO LightingEDGLITpartial

    Single clear acrylic face or Double mirrored acrylic faced LED Exit Signs Green or Red letters and arrows 120V/277V with 90 min. emergency battery backup 24 hrs rechargeable after been discharged Test switch and charge rate indicator Wall or ceiling mount cUL listed CA Title 20 Certified

    • category
    • subcategory
    • environment
    spec →
  • HolophaneQMLED-EMERGENCY-EXIT-SIGNpartial

    QMLED Emergency Exit Sign - Magellan QM LED Exit-Unit Combo

    • category
    • subcategory
    • environment
    spec →
  • Solas Ray LightingCESCWLpartial

    CESCWL Series - LED Emergency Exit/Light Combo

    • category
    • subcategory
    • environment
    spec →
  • LDPIEMLXpartial

    Our Explosion Proof LED Exit Sign delivers clear, visible egress signage in hazardous environments. Built with durable, corrosion-resistant construction and long-life LED technology, it ensures reliable performance while meeting Class I, Division 1 and Class II, Division 1 safety standards.

    • category
    • subcategory
    • environment
    spec →
  • Advantage Lighting SolutionsES-L Combopartial

    The ES-L Combo is a durable, injection molded, 5VA flame retardant exit sign with high impact resistant housing.

    • category
    • subcategory
    • environment

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →

Local Reps

Who reps Genlyte Solutions

Full directory →

26 rep agencies carry the Genlyte Solutions line across 51 states. Pick your state.

+41 more states in the full directory →

Line cards are directional — confirm coverage with the agency before routing a spec.