XEM4ULIGHTPIPELEDEXITEMERGENCYCOMBO
ILLUMINATION • Ultra-bright, energy efficient white LED emergency lighting. • 4.5W (36 LEDs x 0.125 watts) per light pipe • Adjustable high-performance, smooth, chrome-plated, metallized reflector and acrylic, UV-stabilized “light pipe” lens for optimal light distribution. • Long-life, energy efficient Red or Green LED exit sign illumination. ELECTRICAL • Dual
Cross-References
Top equivalents — 12 across 10 brands
Compare top 3 →- spec →
EXIT/EM/CHICAGO features energy-efficient, long-lasting LEDs and two 5.3-watt Chicago-approved adjustable lamp heads.
- category
- subcategory
- environment
- spec delta
- wattage: 5W → 10W
- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- spec delta
- wattage: 5W → 36W
- spec →
LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant
- category
- subcategory
- environment
- spec delta
- wattage: 5W → 2.2W
Single clear acrylic face or Double mirrored acrylic faced LED Exit Signs Green or Red letters and arrows 120V/277V with 90 min. emergency battery backup 24 hrs rechargeable after been discharged Test switch and charge rate indicator Wall or ceiling mount cUL listed CA Title 20 Certified
- category
- subcategory
- environment
- spec →
QMLED Emergency Exit Sign - Magellan QM LED Exit-Unit Combo
- category
- subcategory
- environment
- spec delta
- wattage: 5W → 1.5W
- spec →
This TCL Series ENTER | EXIT (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. It has a corrosion resistant, all-weather cabinet and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- spec →
EXIT/EM/LED features high-performance reflectors, plastic lensing, and ultra-bright white LEDs to provide optimal light distribution for emergency situations.
- category
- subcategory
- environment
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →