52874 (Phx734 R E483/12 24 Vdc) Do Not Exit (12 24 Vdc) Led Sign
This PHX Series DO NOT EXIT outdoor, blankout sign is designed with high-intensity, LED reflected, backlit illumination and a block letter-style message face. The sign message illuminates when turned on and blanks out or extinguishes when off. PHX Series signs are guaranteed readable in direct sunlight.It is designed with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
Cross-References
Top equivalents — 12 across 10 brands
Compare top 3 →- spec →
EXIT/EM/CHICAGO features energy-efficient, long-lasting LEDs and two 5.3-watt Chicago-approved adjustable lamp heads.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → UNV
- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → 120V/277V
- spec →
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
- spec →
LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → 120V/277V
Single/double face configurable with supplied faceplate. 120V/277V. Sturdy ABS plastic housing. Side, top or back mounting. cUL or ETL listed.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → 120V/277V
- spec →
QMLED Emergency Exit Sign - Magellan QM LED Exit-Unit Combo
- category
- subcategory
- environment
- spec →
EXIT/EM/LED features high-performance reflectors, plastic lensing, and ultra-bright white LEDs to provide optimal light distribution for emergency situations.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →