Nora LightingControls

NSLIM4RL1TWMPW

4" Ultra slim LED surface mount boasts a low-profile form factor, lending it a sleek design. Trim easily removes for installation and can easily be swapped with different finish. The Slim is ideal for residential or commercial spaces and creates a polished aesthetic. Features AC LED (No Driver) Dimmable Five color temperatures in each fixture Mount on 4" octagonal junction box Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: Up to 800lm / 11W Color Temperature: Selectable CCT (2700K/3000K/3500K/4000K/5000K) Color Rendering Index: 90+ CRI Finish: Matte Powder White (Black and Silver face plate available, NSLIM-4RDT) Retrofit Kit: Each luminaire includes a retrofit kit Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch

compliance: Title 24cct: 2700K/3000K/3500K/4000K/5000Kwattage: 11Wfamily: NSLIM-4RL1TWMPWlumens: 846cri: 90wattage spec: 23efficacy: 76dimming: TRIACbeam angle: 99

Cross-References

Top equivalents — 12 across 12 brands

Compare top 3
  • Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or

    • category
    • environment
    • voltage
    • lumens
    • CCT
    • CRI
    • +2 more
    • wattage: 23W8.3W
    spec →
  • MP LightingL107exact

    Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.

    • category
    • environment
    • mounting
    • voltage
    • lumens
    • CCT
    • +3 more
    • wattage: 23W7-10W
    spec →
  • ParaflexPFX-3140strong

    PFX-3140 adds a contemporary look to any outdoor space. PFX-3140 is designed for wall applications and mounting hardware is included. Options include photocell.

    • category
    • environment
    • voltage
    • lumens
    • CCT
    • spec delta
    • wattage: 23W13W
    spec →
  • LuminosoLSM2strong

    Replaces halogen and saves 80% energy

    • category
    • environment
    • voltage
    • CCT
    • wattage
    • housing
    • +1 more
    • lumens: 8461800
    spec →
  • Fail-SafeFVS8strong

    Designed with aesthetics as a high priority, the tasteful FVS8 combines style with strength. With architectural matte white paint standard, allow the FVS4 in either 16 or 18 gauge steel to operate in the most demanding environments. Thick polycarbonate lenses protect the fixture from high abuse situations, Continuous run the fixtures using the end KOs, and choose from 2', 3', 4', and 8' lengths

    • category
    • environment
    • voltage
    • CCT
    • CRI
    spec →
  • HALOLCR615RD9FSE020strong

    LCR Regressed Light Commercial Canless Direct Mount

    • category
    • environment
    • voltage
    • CCT
    • CRI
    • spec delta
    • lumens: 8463000
    spec →
  • The HALO Home Smart Motion Floodlight incorporates the system's wireless Bluetooth technology into a durable, twin head design for an advanced outdoor lighting solution built for high performance. Features configurable settings for both the motion sensor and floodlight, including sensitivity, duration and scene control, as well as grouping, scheduling, dimming, and white color tuning. The motion sensor works as a HALO Home controller that can be commissioned to control the light it's attached to or an entire Group of HALO Home-enabled lighting for increased motion-activated security. This unit does not require a hub or internet service and can be wirelessly controlled by a HALO Home Dimmer or smartphone/tablet. White - MST20C18W Bronze - MST20C18B (Do not use in combination with non-HALO Home dimmers)

    • category
    • environment
    • voltage
    • CCT
    • wattage
    spec →
  • iO Lighting008strong

    iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.

    • category
    • environment
    • voltage
    • lumens
    • CCT
    • spec delta
    • voltage: UNV120V/277V
    • wattage: 23W12.1W
    spec →
  • Metalux SkyRidge™ Series sets a new industry standard in performance, style and energy savings.

    • category
    • environment
    • voltage
    • CCT
    • wattage
    • spec delta
    • lumens: 8463157
    spec →
  • Atlas Lighting4-CYLINDERS-CCT-SELECTABLEstrong

    Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.

    • category
    • environment
    • voltage
    • CCT
    • housing
    spec →
  • H.E. WilliamsMD4strong

    Meeting IESNA recommendations and providing maximum versatility, Williams split-style, over-the-bed MD4 luminaire is available with ambient, reading, and exam lighting features.

    • category
    • environment
    • voltage
    • CCT
    • CRI
    • housing
    • +1 more
    • lumens: 8467615
    • wattage: 23W71.4W
    spec →
  • U.S. Architectural LightingCBR5strong

    Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.

    • category
    • environment
    • voltage
    • CCT
    • housing
    spec →

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →

Local Reps

Who reps Nora Lighting

Full directory →

3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.

Line cards are directional — confirm coverage with the agency before routing a spec.