IC20RLED-600LM-REMODEL-HOUSING
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
4" Pinhole trim focuses the beam spread through small opening. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: Haze Pinhole / Bright White Flange or Bright White Pinhole / Bright White Flange Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 8.3W → 23W
- spec →
Dimmable ELV, Triac or 0-10V depending on driver used. Same LED light engine for 850 and 1100 lumens (see housings) cUL Listed for Direct Contact with insulation Works with compatible ceilings up to 1¼″ Height allows for use in ceilings with under 5" depth. Ceiling thickness can be reduced from fixture depth. 38° Standard beam with optional 28° and 60° Wet Location Rated for Indoor and Outdoor Use JA8-2016-E, cUL, and Energy Star Qualified Life Span 50,000 Hours L70 U.S. Pat. 10,125,959
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +3 more
- spec →
The HTGDU-3W is a 3-inch direct/indirect rotational arm mount fixture featuring Microstructure EdgeTech Optics™ for superior optic control and seamless illumination. With full 361° locking rotational hubs, individually controlled direct and indirect outputs, and minimalist MEO™ design, it offers flexible performance and clean aesthetics. Includes toolless “Push to Eject” access, integral or remote driver options, precision-machined components, and SLO up to 1480 lm/ft. 90+ CRI standard with Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +3 more
- voltage: UNV → 120-277V, 347V
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 8.3W → 32W
- spec →
PFX-3156 Gooseneck Light is a unique decorative lighting fixture that allows you to update the look of your building. Elegant and curved goose neck arm, simple and low-key appearance design, can be well applied to a variety of architectural styles. Quick and easy Installation. The 28W Fixtures offers Selectable CCTs, can be adjusted to be 2700K/3000K/ 4000K/5000K/6500K. Universal Voltage 120-277VAC. Integrated Photocell included.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 900 → 3080
- wattage: 8.3W → 28W
- spec →
The LITELUME™ LED Downlight Disk (LL-DLD) luminaire can be used in a wide variety of indoor applications ( damp rated ) for new construction or retrofit. Featuring 5 CCT’s to choose from, and comes with and without PIR motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 900 → 1819
- wattage: 8.3W → 19W
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- lumens: 900 → 3000
- wattage: 8.3W → 18W
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- lumens
- CCT
- dimming
- +1 more
- voltage: UNV → 120V/277V
- spec →
With the advancement in our industry-leading AccuLED Optics™ system, the next generation Navion LED area, site and roadway luminaire offers an expanded selection of optical distributions to provide the configurability and superior performance required for outdoor applications. The Navion luminaire provides uniform, glare-free, energy-efficient light for commercial, industrial and municipal parking lots as well as roadway applications. UL/cUL listed for wet locations, IP66 enclosure rating available.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 8.3W → 440W
- spec →
Lanterra 1003 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 900 → 9000
- wattage: 8.3W → 99W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Juno
Full directory →60 rep agencies carry the Acuity Brands line across 51 states. Pick your state.
Alabama AL1 agency
- AMA LightingAcuity Brands
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
- Long Sales AgencyAcuity Brands
Statewide
California CA6 agencies
- sixteen5hundredAcuity Brands
San Francisco
- SDLAAcuity Brands
San Diego
- C.J.S. LightingAcuity Brands
Sacramento
- Mar Vista SalesAcuity Brands
Ventura
- C.B.C. LightingAcuity Brands
Fresno
- All 6 in the CA directory →
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
- Federated LightingAcuity Brands
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Envision Lighting SystemsAcuity Brands
Fort Myers · Tampa
- AMA LightingAcuity Brands
Panhandle
- LandrethAcuity Brands
Orlando
- Arch. Sales & IlluminationAcuity Brands
Jacksonville
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.