008
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- voltage: 120V/277V → UNV
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V → UNV
- lumens: 850 → 5000
- wattage: 12.1W → 52W
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V → UNV
- lumens: 850 → 10904
- wattage: 12.1W → 86.9W
- spec →
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
- category
- environment
- voltage
- lumens
- CCT
- dimming
- +1 more
- voltage: 120V/277V → UNV
- spec →
Low Voltage, Recessed DownlightThe MINUS 1 showcases first-of-its- kind hardware and software, developed by Apure to enable complete control of the LED’s temperature and the flow of power within the circuit, thereby enhancing the lifetime and performance of the luminaire. The high-tech design features a perfectly round 10 mm (3/8′′) aperture that distributes virutally glare-free light in either a 20 or 40 degree beam spread and includes various dimming protocols, each fully compatible with all major architectural lighting control systems.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V → UNV
- spec →
Xenia Wall Optics Remote Driver
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V → UNV
- wattage: 12.1W → 96W
- spec →
48" Industrial LED wraparound includes two integral switches for lumen output and selectable color temperature. It is ideal for commercial, residential, industrial, and retail applications, such as stairwells, hallways, garages, schools, offices, and more. It is easy to install and great for replacing outdated fluorescents with an energy-efficient, cost-saving alternative. The luminaire’s lens is designed to uniformly spread and soften the appearance of the light while maximizing its distribution and output. Input Voltage: 120-277V Selectable Lumens: 7000lm / 55W; 7500lm / 60W; 8000lm / 65W Color Temperature: Selectable CCT (3000K / 3500K / 4000K) Finish: White Dimming: 0-10V Mounting Options: Surface Mount, Wall Mount or Suspended (pendant kit ordered separately) Emergency: Optional integral emergency battery with test button switch Motion Sensor: An optional internal microwave sensor can detect motion up to 17 feet away and 120° under the luminaire. Listing: cULus Listed for Damp Locations DLC Listed (Direct Linear, Stairwell and Passageway)
- category
- environment
- voltage
- CRI
- dimming
- spec delta
- lumens: 850 → 8100
- cct: 2700K → 3000/3500/4000K
- wattage: 12.1W → 67.8W
- spec →
Stair Lighter TSL9 is highly optimized for use in unattended stairwells. It combines rugged vandal resistant construction with state-of-the-art sensor control. The purpose-built shape of the TSL9
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V → UNV
Includes 120V-277V 19 watts, 465 delivered lumens, 90 CRI 2700K LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. Ceiling mount only.
- category
- environment
- voltage
- CCT
- spec →
Stylish contemporary LED flush mount with a metal geometric pattern accent. Full white acrylic diffuser on side and bottom. Available in two finishes and three sizes. Motion sensor and batter back-up options.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V → 120-277V
- lumens: 850 → 1919
- wattage: 12.1W → 40W
- spec →
The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V → 120-277V, 347V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps iO Lighting
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.