NIOC2RPH
2" Pinhole trim focuses the beam spread through small opening. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: HZMPW: Haze Pinhole / Bright White Flange MPW: Bright White Pinhole / Bright White Flange Accessories: NF-R124: Universal New Construction Frame-In NFC-R313: New Construction Frame-In with Collar NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 23W → 10W
- spec →
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 23W → 8.3W
- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +3 more
- wattage: 23W → 7-10W
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
PFX-3156 Gooseneck Light is a unique decorative lighting fixture that allows you to update the look of your building. Elegant and curved goose neck arm, simple and low-key appearance design, can be well applied to a variety of architectural styles. Quick and easy Installation. The 28W Fixtures offers Selectable CCTs, can be adjusted to be 2700K/3000K/ 4000K/5000K/6500K. Universal Voltage 120-277VAC. Integrated Photocell included.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 811 → 3080
- spec →
The LITELUME™ LED Downlight Disk (LL-DLD) luminaire can be used in a wide variety of indoor applications ( damp rated ) for new construction or retrofit. Featuring 5 CCT’s to choose from, and comes with and without PIR motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 811 → 1819
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- lumens
- CCT
- dimming
- +1 more
- voltage: UNV → 120V/277V
- wattage: 23W → 12.1W
- spec →
With the advancement in our industry-leading AccuLED Optics™ system, the next generation Navion LED area, site and roadway luminaire offers an expanded selection of optical distributions to provide the configurability and superior performance required for outdoor applications. The Navion luminaire provides uniform, glare-free, energy-efficient light for commercial, industrial and municipal parking lots as well as roadway applications. UL/cUL listed for wet locations, IP66 enclosure rating available.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 23W → 440W
- spec →
Lanterra 1003 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 811 → 9000
- wattage: 23W → 99W
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 811 → 5000
- wattage: 23W → 52W
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 811 → 10904
- wattage: 23W → 86.9W
- spec →
The LAC Series crowned four-rung traditional acorn luminaire features a corrosion-resistant cast aluminum fitter with 11 decorative design options, combined with a high-impact clear acrylic globe with two available sizes. It utilizes a three-dimensional LED Power Array™, offering efficient IES distribution patterns (Types II, III, IV, and V). Available in neutral, cool, and warm white, with lumen maintenance of L94 at 60,000 hours, this fixture supports dimming and is UL® listed for wet locations. Optional features include mini-button photocells, motion sensors, and two lens configurations for diffused lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 23W → 2W
- spec →
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- spec →
The Brock 3.5 Series Outdoor Wall LED is a modern and stylish light perfect for any outdoor space. It features 5 CCT selectable via toggle switch, a photocell sensor for auto on and off, and comes in standard finishes such as white, black, and oil rubbed bronze, or custom finishes upon request. This light has the option for either direct or direct/indirect illumination.
- category
- environment
- voltage
- CCT
- wattage
- spec delta
- lumens: 811 → 1700
- spec →
60 Linear Surface is a continuous flush lens surface mounted linear luminaire with ultra clean design for absolute minimal appearance. Easily installed internal LED tray assembly with integral driver.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
Dimmable ELV, Triac or 0-10V depending on driver used. Same LED light engine for 850 and 1100 lumens (see housings) cUL Listed for Direct Contact with insulation Works with compatible ceilings up to 1¼″ Height allows for use in ceilings with under 5" depth. Ceiling thickness can be reduced from fixture depth. 38° Standard beam with optional 28° and 60° Wet Location Rated for Indoor and Outdoor Use JA8-2016-E, cUL, and Energy Star Qualified Life Span 50,000 Hours L70 U.S. Pat. 10,125,959
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- wattage: 23W → 8.6W
- spec →
Stair Lighter TSL9 is highly optimized for use in unattended stairwells. It combines rugged vandal resistant construction with state-of-the-art sensor control. The purpose-built shape of the TSL9
- category
- environment
- voltage
- CCT
- dimming
- spec →
Assure™ nightlight. Lights' quiet purpose. - For finding your way, feeling secure in an unfamiliar space or when a health condition affects normal perception, our nightlight is always there, a
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- wattage: 23W → 50W
- spec →
“GEN 3” - LED DUAL SELECTABLE WALL PACK BUY AMERICA OPTION The BELMONT III GEN3 Series 9110G3 is traditional wall pack constructed out of a die-cast aluminum housing and tempered borosilicate glass lens. The unit comes standard with 0-10V dimming capability and three power ranges with a dual selectable platform, wattage and color temperature, on each for jobsite versatility. Options include a pre-installed photocell and Buy America Compliancy. IP65 rated.
- category
- environment
- voltage
- lumens
- dimming
- spec delta
- cct: 2700K → 3000/4000/5000K
- wattage: 23W → 115W
- spec →
The iO Lighting MiniO Flex-Optic maintains the minimalistic form factor of the MiniO family while cleverly illuminating curvatures in architectural details. Four optimized optical distributions across four color temperatures provide enhanced, essential layers of light. The MiniO family reinforces creative design freedom with minimalistic flexible forms of light and remote drivers. Ideal for indoor or outdoor organic architecture where flexible top-bend architecture is necessary to illuminate small spaces. Utilize as a wallgrazer in a linear run with one of the four co-molded optical-grade silicone options, placing light on the desired details. This MiniO minimalistic, flexible form factor is available in 0-10V dimming via remote driver and creates runs up to 16.4' on a single power supply.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- wattage: 23W → 100W
- spec →
Includes 35.1 watt, 1237 delivered lumens, 2700K 90 CRI LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. ADA compliant. Mounts vertical or horizontal. 120V-277V.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: UNV → 120V
- spec →
The Bailey large round ceiling series with its wide metal trim band and white acrylic diffuser, is available in two finishes and two sizes. Featuring five color adjustable CCT and options for battery back-up, motion sensor or battery back-up with motion sensor.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- lumens: 811 → 2700
- wattage: 23W → 45W
- spec →
Ceiling mount series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and mounting plate. - Micro-prismatic patterned, flat, tempered silk-screened soda-lime glass diffuser (TECH versions). - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life. - 100° x 100° beam angle (TECH). - Input voltage: 120-277 V (50 / 60 Hz), integral driver. - Consult factory for dimming options, custom finishes (please specify RAL color), and non-cataloged CCT (Kelvin) options. - Product meets Buy American Act requirements within ARRA. - 5-year warranty.
- category
- environment
- voltage
- lumens
- spec delta
- cct: 2700K → 3000/4000K
- wattage: 23W → 10W
- spec →
The HTG-3PR-LP LoPro Flush Perimeter fixture is available in versatile mounting options, including Trimless, Trim Flange, and T-Grid configurations. Designed for low-plenum installations, it features a low-profile depth of 2.85”–3.05” (integral driver). The fixture offers advanced optics with options for glare control, diffused (Lambertian), or room fill optics, ensuring optimal lighting performance. With specified lumen outputs (SLO) ranging from 224 lm/ft to 1754 lm/ft, it boasts a minimalistic 3” aperture and can be configured in individual lengths or seamless continuous runs up to 300 feet without lens breaks. Accessibility for drivers, wiring, and serviceability is streamlined through a patented toolless “Push to Eject” system, while the toolless latch system and Quick-Click 5-Wire setup enable simple, quick, and seamless installation. Proudly crafted in Huntington Beach, CA, USA.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: UNV → 120-277V, 347V
- wattage: 23W → 10W
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- dimming
- spec delta
- lumens: 811 → 120000
- cct: 2700K → 4000K
- wattage: 23W → 850W
- spec →
LX1.8 architectural linear luminaire housing from 1.8” wide aluminum extruded profile, available in 2, 4, and 8-Ft length with White, Black finish; integral driver, frosted polycarbonate lens.
- category
- environment
- voltage
- dimming
- spec delta
- cct: 2700K → 3000K
- wattage: 23W → 80W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Nora Lighting
Full directory →3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.
Iowa IA1 agency
Statewide
Nebraska NE1 agency
Omaha
Nevada NV1 agency
Las Vegas
Wisconsin WI1 agency
- ERI / illuminateCurrent
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.