NEX730LED
LED Exit sign with dual emergency fixtures feature Ball and Socket LED lights for full adjustability. The exit sign is powered by LED source for maximum life without maintenance; Expected life 100,000 hours. In the event of power loss, both sign and heads will operate for a minimum of 90 minutes. FEATURES • Fully adjustable 2.8 watt high-intensity LED head • Universal mounting - Wall or ceiling • UL listed and meets or exceeds UL924, NEC, OSHA and NFPA 101 Life Safety Code requirements • Injection molded high impact and scratch resistant corrosion-proof and UL94 5V-0 flame retardant housing • Push-To-Test switch • Maintenace free NiCad battery • 120V or 277V AC input • Field selectable Chevrons • 6" High and 3/4" stroke letters • External LED status indicator • Available in Black or White • Damp location listed • Wet location shield accessory available (NEG-60). Sold separately. Finishes: Black (B), or White (W) Battery: 4.8V Replaceable 1.0Ah NiCad Input Voltage: 120V or 277V AC Dimensions: Width: 1-3/4" Height: 7-1/4" Length: 11-3/4" Max Extension: 9-1/2"
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The EXIT/IP from H.E. Williams, Inc. is a NEMA 4X, NSF, and IP66-rated LED exit sign engineered for food service and demanding environments. With corrosion-resistant construction, tamper-resistant hardware, and emergency battery options, it delivers dependable life safety performance.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → UNV
- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 4500K → 2700K
- wattage: 2.7W → 36W
Single/double face configurable with supplied faceplate. 120V/277V. Sturdy ABS plastic housing. Side, top or back mounting. cUL or ETL listed.
- category
- subcategory
- environment
- voltage
- spec →
Ideal for wet location areas requiring exit signs for AC only or battery back-up power that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → UNV
- wattage: 2.7W → 5W
- spec →
This TCL Series ENTER | EXIT (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. It has a corrosion resistant, all-weather cabinet and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → 120-277VAC
- spec →
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
- spec →
Reduced Profile All LED Exit & Emergency Thermoplastic Combo Ultra-bright, energy efficient, long-life Red or Green LED EXIT sign illumination. Ultra-bright, energy efficient, long-life White LED adjustable LED lamp heads provide up to 30-ft center-to center spacing with 3-ft path of egress at 10-ft mounting height. 1.5 watt (3 LEDs x 0.50 watt) per head. Unique all-inclusive lamp, reflector and lens assembly. Certified to CEC under Title 20 Regulations BAA & BABA Compliant when selecting the "assembled in USA option"
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
- spec →
The ACX AtLite Complete Edge Lit Exit series are designed for multiple installation applications with pivot housing design that allows surface ceiling, wall and end mount plus recessed wall, recessed ceiling and sloped ceiling installations. The ACX series are provided with a surface mount canopy and a recessed box for universal mounting. The lens panels are City of New York 8” compliant and include single-sided clear and double-sided mirror lens panels for easy stocking and ordering. Models with a no maintenance nickel cadmium battery provide 90 minutes of run time when AC power is lost. The housings have an aesthetically pleasing satin aluminum finish.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 277V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Nora Lighting
Full directory →3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.
Iowa IA1 agency
Statewide
Nebraska NE1 agency
Omaha
Nevada NV1 agency
Las Vegas
Wisconsin WI1 agency
- ERI / illuminateCurrent
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.