46 Series LED Exit Sign
The Chloride 46 Line Series LED exit sign offers a slender die cast design that allows these exits to be unobtrusive, while providing excellent visibility required for emergency units.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Our CLI is a completely sealed, Side, Top or Wall Mount exit sign enclosure developed for applications such as clean rooms, high tech manufacturing facilities, laboratories, hospitals, food processing facilities, and commercial kitchens.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Single clear acrylic face or Double mirrored acrylic faced LED Exit Signs Green or Red letters and arrows 120V/277V with 90 min. emergency battery backup 24 hrs rechargeable after been discharged Test switch and charge rate indicator Wall or ceiling mount cUL listed CA Title 20 Certified
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Our Explosion Proof LED Exit Sign delivers clear, visible egress signage in hazardous environments. Built with durable, corrosion-resistant construction and long-life LED technology, it ensures reliable performance while meeting Class I, Division 1 and Class II, Division 1 safety standards.
- category
- subcategory
- environment
- voltage
ETL Certified for Fire & Life Safety: This Amico LED exit sign is officially ETL certified. Trusted by facility managers, electrical contractors, and business owners to pass inspections with zero compliance issues.94V-0 fire resistant, high-impact resistant — engineered to remain fully operational in fires or seismic events.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Durable steel housing LED exit sign and mini-system exit/emergency light combination units offer a variety of mounting options and configurations to suit a range of applications.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 2.5W → 30W
- spec →LightalarmsUX4 LED Steel Exit and Combination Series [available with LED lamps] (Nexus Compatible)strong
Steel LED exit signs and combination units use energy-efficient LEDs with a choice of battery options to meet your requirements.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 2.5W → 30W
- spec →
Our MXC Series is a Class 1 & 2 Division 1 & 2 LED Emergency Exit Fixture that offers heads with a choice of MR16 LED lamp wattages. Exit sign uses a 3 watt LED lamp.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 2.5W → 40W
- spec →
This SBL Series NOT AN EXIT indoor, blankout, LED backlit sign is designed with a matrix of energy efficient LEDs illuminating a block-style message. The sign features blankout technology that only displays the sign message when illuminated.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Genlyte Solutions
Full directory →26 rep agencies carry the Genlyte Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- SESCO LightingSignify (Philips)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Allied Group SalesSignify (Philips)
Statewide
Arkansas AR1 agency
- SESCO LightingSignify (Philips)
Statewide
California CA2 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- LINX Lighting + ControlsSignify (Philips)
Los Angeles · San Diego · Ventura
Colorado CO1 agency
- CT Lighting & ControlsSignify (Philips)
Statewide
Connecticut CT1 agency
- Apex Lighting SolutionsSignify (Philips)
Statewide
Delaware DE1 agency
- ELA + SynergySignify (Philips)
Statewide
District of Columbia DC1 agency
- Lighting EnvironmentsSignify (Philips)
Statewide
Florida FL1 agency
- SESCO LightingSignify (Philips)
Fort Myers · Jacksonville · Miami · Orlando · Panhandle · Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.