TCS
Low-profile LED emergency lighting in thermoplastic housing — economical commercial-grade unit.
Cross-References
Top equivalents — 12 across 10 brands
Compare top 3 →Highest-output ELM Quantum dual-head emergency unit at 1100 lumens. For large open areas requiring maximum coverage.
- category
- voltage
- duration
- spec delta
- voltage: 120/277 VAC → 120-277V MVOLT
- spec →
The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: thermoplastic housing, long life and maintenance free battery and LED source. The patented external battery disconnect and easy hang features to reduce installation time and cost. The SEL series is designed for indoor commercial or industrial use. And the FirstLink feature with the app for self-testing and compliance data reporting (via Bluetooth.)
- category
- voltage
- lumens
- housing
- spec delta
- voltage: 120/277 VAC → 277V
- wattage: 7W → 2.2W
The Dynamo Family offers the latest technology and features. The LEDs never require replacement, the battery offers 30% longer life, and the photometric performance exceeds any other industrial emergency unit on the market. The Dynamo Family offers continuous lumen output for the full 90 minutes required by code ensuring maximum visibility when you need it most.
- category
- voltage
- lumens
- housing
- spec delta
- voltage: 120/277 VAC → 277V
- wattage: 7W → 12W
- spec →
Exitronix · General Purpose · Specification · Emergency Lighting · Guardian G3 · Guardian G3 · Emergency Lights
- category
- voltage
- lumens
- wattage
- housing
- spec delta
- voltage: 120/277 VAC → UNV
Single whip for J-Box mounting. 90 minutes of emergency light. 120/277V AC, 60Hz. Bottom lead
- category
- voltage
- wattage
- spec →
The EB5T5 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB5T5 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- voltage
- lumens
- wattage
- spec delta
- voltage: 120/277 VAC → UNV
- spec →
Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Class 2 output - UL 1310 certified, CSA 22.2 No 223-M91 Controlled power for predictable discharge 10 - 60VDC for wide range of LED loads Universal input (120 through 277VAC, 50/60Hz) Includes wall plate with test switch Certified to the energy efficiency standards of California Title 20 Accessory: NEPKA-07LEDFPTS: Replacement Remote Test Switch
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 277V
- spec →
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
- category
- voltage
- spec delta
- wattage: 7W → 1W
Contractor Select EU2C dual LED lamp head emergency light - most popular and readily available EU2C configuration.
- category
- voltage
- duration
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Evenlite
Full directory →52 rep agencies carry the Evenlite line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting PartnershipCurrent
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
- PLP SoCalCurrent
Los Angeles · Ventura
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- illuminateCurrent
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Jacksonville
- Karl Volk & Co.
Panhandle
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.