E418R0827W
Module includes LED Module Driver. Triac/ELV dimming. Can be used in dedicated LED housings from ELCO or used to retrofit medium base (E26) housings. Life span of 50,000 hours L70. USA designed and assembled. Limited 5 year warranty.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- lumens
- CCT
- wattage
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- lumens
- CCT
- wattage
- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- lumens
- CCT
- wattage
- spec →
The HTGDU-3W is a 3-inch direct/indirect rotational arm mount fixture featuring Microstructure EdgeTech Optics™ for superior optic control and seamless illumination. With full 361° locking rotational hubs, individually controlled direct and indirect outputs, and minimalist MEO™ design, it offers flexible performance and clean aesthetics. Includes toolless “Push to Eject” access, integral or remote driver options, precision-machined components, and SLO up to 1480 lm/ft. 90+ CRI standard with Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant.
- category
- environment
- lumens
- CCT
- wattage
- spec →
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
- category
- environment
- lumens
- CCT
- spec →
5"/6" Pearl LED Retrofit series is cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. Retrofit luminaires deliver over 1050 lumens with a regressed cone construction, which optimizes visual cut-off and adjusts up to 30°. Input Voltage: 120V Socket: Medium base socket adapter included Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: 1050lm (600lm with Comfort Dim) / 10W Optics Included: Spot, Narrow Flood, Flood (field changeable) Compatible Housings: NFBIC-5LMRATA = 5" Fire Rated LED Housing NFBIC-5INCATA = 5" Fire Rated Line Voltage Housing NHIC-5LMRAT = 5" IC Air-Tight LED Housing NHIC-527LMRAT = 5" Shallow IC Air-Tight LED Housing NHIC-501QAT = 5" IC Air-Tight Line Voltage Housing NHIC-527QAT = 5" Shallow IC Air-Tight Line Voltage Housing NFBIC-6LMRATA = 6" Fire Rated LED Housing NFBIC-6INCATA = 6" Fire Rated Line Voltage Housing NHIC-6LMRAT = 6" IC Air-Tight LED Housing NHIC-27LMRAT = 6" Shallow IC Air-Tight LED Housing NHIC-17QAT = 6" IC Air-Tight Line Voltage Housing NHIC-27QAT = 6" IC Air-Tight Line Voltage Housing NH-26Q = 6" Non-IC Air-Tight Line Voltage Housing NH-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Housing NHIC-6G24ATFL = 6" IC Air-Tight GU24 Housing NHRIC-5LMRAT = 5" IC Air-Tight LED Remodel Housing NHRIC-527LMRAT = 5" Shallow IC Air-Tight LED Remodel Housing NHRIC-504QAT = 5" IC Air-Tight Line Voltage Remodel Housing NHRIC-6LMRAT = 6" IC Air-Tight LED Remodel Housing NHRIC-27LMRAT = 6" Shallow IC Air-Tight LED Remodel Housing NHRIC-17QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHRIC-27QAT = 6" IC Air-Tight Line Voltage Remodel Housing NHR-26Q = 6" Non-IC Air-Tight Line Voltage Remodel Housing NHR-27Q = 6" Shallow Non-IC Air-Tight Line Voltage Remodel Housing Optional Remote Emergency: NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch
- category
- environment
- CCT
- wattage
- spec →
All purpose LED closet light with PIR Motion sensing. Polycarbonate housing and lens. 3 color CCT switch. 6" Surface Round with Occ Sensor; 800 Lumens
- category
- environment
- lumens
- wattage
- spec delta
- cct: 2700K → 3000/4000/5000K
- spec →
Ceiling mount series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and mounting plate. - Micro-prismatic patterned, flat, tempered silk-screened soda-lime glass diffuser (TECH versions). - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life. - 100° x 100° beam angle (TECH). - Input voltage: 120-277 V (50 / 60 Hz), integral driver. - Consult factory for dimming options, custom finishes (please specify RAL color), and non-cataloged CCT (Kelvin) options. - Product meets Buy American Act requirements within ARRA. - 5-year warranty.
- category
- environment
- lumens
- wattage
- spec delta
- cct: 2700K → 3000/4000K
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- lumens
- CCT
- spec delta
- wattage: 11.4W → 32W
- spec →
The LITELUME™ LED Downlight Disk (LL-DLD) luminaire can be used in a wide variety of indoor applications ( damp rated ) for new construction or retrofit. Featuring 5 CCT’s to choose from, and comes with and without PIR motion sensor.
- category
- environment
- CCT
- spec delta
- lumens: 850 → 1819
- spec →
The UC1 provides effective LED task lighting in a variety of environments. Constructed with minimal 3/4" depth and durable IK10 rated housing and lens. 24", 36", 48" lengths for use in confined spaces. UC1 comes with selectable CCT and dim to warm ELV/Triac (120V only) making it an excellent choice for a plethora of applications.
- category
- environment
- CCT
- spec delta
- wattage: 11.4W → 440W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.