EXR2H
Remote Capable LED Exit/Emergency Light Combination. Light Source : LED; Listings : Damp Location; Mounting : Wall,Ceiling; Product Type : Emergency,Exits
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Featuring LED exit and LED lightpipe emergency lighting in one self-contained, compact design.
- category
- subcategory
- environment
- voltage
- lumens
- spec delta
- voltage: 277V → UNV
- wattage: 2.5W → 4.5W
- spec →
LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Ideal for wet location areas requiring exit signs for AC only or battery back-up power that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 2.5W → 5W
- spec →
This TCL Series ENTER | EXIT (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. It has a corrosion resistant, all-weather cabinet and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
- spec →
The LHX-NY Series from the Lithonia Lighting® Indura® Family is ideal for New York applications where steel exits is required. Available in a white finish. Dual Volt (120/277V) Back Mount
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- wattage: 2.5W → 36W
- spec →
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
Single/double face configurable with supplied faceplate. 120V/277V. Sturdy ABS plastic housing. Side, top or back mounting. cUL or ETL listed.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel
- category
- environment
- voltage
- housing
- spec →
The Rival RXD Series Die-cast Exit features aluminum housing with canopy and a brushed aluminum face. It has dual voltage input to meet a variety of needs. Long-life, energy-efficient LED lamps reduce energy costs and eliminate routine lamp maintenance. The premium sealed nickel cadmium batteries have a 15-year life expectancy. With ceiling, wall and end mounting the Rival RXD Series can meet any design needs. Universal, field-selectable chevrons add versatility. This series is UL damp location listed (indoor).
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ConTech Lighting | Leviton
Full directory →32 rep agencies carry the Contech Lighting line across 51 states. Pick your state.
Alabama AL1 agency
- SESCO LightingSignify (Philips)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
- PLP SoCalCurrent
Los Angeles · Ventura
Colorado CO1 agency
- The MH CompaniesCurrent
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
- DiversifiedCurrent
Statewide
District of Columbia DC1 agency
- One Source AssociatesCurrent
Statewide
Florida FL1 agency
- SESCO LightingSignify (Philips)
Fort Myers · Jacksonville · Miami · Orlando · Panhandle · Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.