EXCLUR
The Chloride Compac LED emergency unit CLUR3 is a flush mounted emergency designed to complement the rest of the Compac LED exit/emergency family in looks and reliability. It allows for immediate and safe egress in low light situations and works in harmony within commercial or light industrial applications. The center lamp head is stationary while the two side lamps can be aimed for the perfect left and right angles.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
ECC This product series has been discontinued.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 277V → UNV
- wattage: 2.2W → 4W
- spec →
LED exit sign with battery backup for illumination during power loss. Luminaire is powered by LED sources for maximum life without maintenance. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. BODY 13" Width X 8-7/8" Height X 2-1/2" Depth Extruded aluminum housing and acrylic panel FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional dual face plate included. Fully illuminated 6" letters with 3/4" stroke and field selectable directional chevrons included. MOUNTING Mounting hardware included for ceiling, wall or side mount applications. Listed for installations indoor, outdoor or wet locations. ELECTRICAL Voltage: 120/277VAC 60Hz input Wattage: 2.2W Battery: 3.6V Replaceable 400mAh NiCad battery Recharge Time: 24 hours Operating Temperature: Standard: 0°C to 50°C Cold Weather Option: -25°C to 50°C EMERGENCY CIRCUIT During loss of power, NiCad battery will operate LED exit sign for 90 minutes. Battery requires 24 hours to recharge when power is restored. LABELS AND LISTINGS · UL 924 Listed for Wet Locations · NFPA 70 & NFPA 101 Life Safety Code · California Energy Commission (CEC) Compliant · Title 20 Compliant
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → 120V/277V
Single clear acrylic face or Double mirrored acrylic faced LED Exit Signs Green or Red letters and arrows 120V/277V with 90 min. emergency battery backup 24 hrs rechargeable after been discharged Test switch and charge rate indicator Wall or ceiling mount cUL listed CA Title 20 Certified
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- spec →
This SBL Series NOT AN EXIT indoor, blankout, LED backlit sign is designed with a matrix of energy efficient LEDs illuminating a block-style message. The sign features blankout technology that only displays the sign message when illuminated.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
- spec →
The LPXC combo series is a UL 924 code compliant solution for exit and emergency requirements. It is designed to operate for a minimum of 90 minutes during a power outage. It features a polycarbonate housing, LED sources for both the exit and the emergency heads, as well as a labor saving self-diagnostic option that automatically performs required NFPA testing. The LED emergency heads are available with 55 feet of egress coverage. The LED source and battery require no maintenance. The FirstLink feature with the app results in self-testing and compliance data reporting (via Bluetooth.)
- category
- environment
- voltage
- CCT
- wattage
- spec →
EXIT/EM/CHICAGO features energy-efficient, long-lasting LEDs and two 5.3-watt Chicago-approved adjustable lamp heads.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 2.2W → 10W
- spec →
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
- spec →
QMLED Emergency Exit Sign - Magellan QM LED Exit-Unit Combo
- category
- subcategory
- environment
- spec →
Adjustable long lasting, efficient ultra bright white LED lamp heads. One, 0.5W white LED per lamp head. Unique all inclusive lamp, reflector and lens assembly. Long-lasting, energy efficient Red or Green LED EXIT sign illumination.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → UNV
- spec →
Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel
- category
- environment
- voltage
- wattage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →