Cross-Reference
Find the equal.
50,956 products · 253 brands · 31,855 spec sheets — every product cross-referenced to its equals at lookup.
262 products
Filtered by spec — refine in the sidebar, or open one for its cross-references. Showing the first 60; add filters to narrow.
indoor/outdoor · pendant decorative
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T SO Cord with DALI Control (TS-5LT) is used to feed power and control wiring to suspended industrial LED and Fluorescent lighting fixtures from a compatible five-conductor Extender Cable (EC). See the EC specification sheet for details on compatibility.
indoor/outdoor · pendant decorative
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Drop SO Cord with DALI Control (DS-5LT) is used to feed power and control wiring to suspended industrial LED and Fluorescent lighting fixtures from a compatible five-conductor Circuit T (CT). See the CT specification sheet for details on compatibility. Fixtures wired with MWS DS-5LT can be unplugged under load without interrupting power or control to downstream fixtures.
indoor/outdoor
Feeds power to Industrial HID and fluorescent lighting fixtures wired with Drop SO cords (DS) or Drop cables (DC). Provides circuit selection at each fixture and allows fixtures to be disconnected without interrupting power downstream. All unused outlets require a MWS dust cover.
indoor/outdoor
Used to feed Industrial HID and fluorescent lighting fixtures in open ceiling construction from a Circuit T (CT) or Splitter(SP). Fixtures wired with MWS Drop SO Cords can be disconnected under load for repair or relocation without interrupting power down line.
indoor/outdoor
Feeds Industrial HID and Fluorescent lighting fixtures in open ceiling structure while allowing the circuit to feed through to the nest fixture. All unused outlets require a MWS dust cover.
indoor/outdoor · wall
Supplies power to out-of-system units that are wall-mounted or ceiling-mounted. MWS Drop cables may be plugged into the last component, Splitter (SP) or Circuit T (CT) anywhere within the system.
indoor/outdoor
The MWS Splitter (SP) adds an additional power out at any point within the MWS system. All unused outlets require a MWS dust cover.
indoor/outdoor
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Fixture Fitting with DALI Control (FF-5LT) feeds power and control to any lighting fixture, while allowing the power and control to feed through to the next fixture
indoor/outdoor · wall
MWS Drop Cable supplies power to out-of-system units that are wall-mounted or ceiling-mounted.
indoor/outdoor · wall
MWS Drop Cable supplies power to out-of-system units that are wall-mounted or ceiling-mounted.
indoor/outdoor
Continues the system between MWS components that interface with light fixtures, switches and convenience power outlets. Any MWS cable component may have length added with an Extender Cable. All unused outlets require a MWS dust cover.
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
The MWS Fitting Cable (FC) continues power from the Starter or switch drop to the first lighting fixture and between lighting fixtures. The line side connector snaps into any 1/2" knockout and has 6" #18 leads to connect to fixture wiring. MWS Fixture Cables may have length added with an Extender Cable. All unused outlets require a MWS dust cover.
indoor/outdoor
MWS Future/Power Fitting feeds power to fixtures and allows the circuit to feed the next fixture.
indoor/outdoor
The MWS Starter Fixture Cable (SF) starts the MWS system immediately at the electrical junction box or at the switch box and continues to the first lighting fixture. Subsequent fixtures connected to the Starter Fixture Cable are wired with standard Fixture Cables(FC). The line side connector installs into any 1/2" knockout and has #18 tap leads to connect to the fixture wiring. All unused outlets require a MWS dust cover.
indoor/outdoor
The MWS Starter Fitting is the starting point for the MWS system. The Fitting is installed in a standard 1/2" knockout of an electrical unit. The Starter Fitting is mounted externally and does not impact wire fill. All unused outlets require a MWS dust cover.
indoor/outdoor
MWS Starter Fitting/Cable is the starting point for the MWS system. Standard 1/2" knockout.
indoor/outdoor · wall
Feeds power to wall mounted or ceiling mounted fixtures and convenience outlets while feeding circuits downstream to another electrical component. MWS Extender Cables feed power to each T Cable. All unused outlets require a MWS dust cover.
indoor/outdoor
MWS Circuit T provides circuit selection and allows disconnect without interrupting power
indoor/outdoor
MWS Circuit T provides circuit selection and allows disconnect without interrupting power
indoor/outdoor · wall
MWS Drop Cable supplies power to out-of-system units that are wall-mounted or ceiling-mounted.
indoor/outdoor · wall
MWS Drop Cable supplies power to out-of-system units that are wall-mounted or ceiling-mounted.
indoor/outdoor
MWS Drop SO Cord used to feed Industrial HID and fluorescent lighting fixtures from a Circuit T
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Starter Fitting/Cable is the starting point for the MWS system. Standard 1/2" knockout.
indoor/outdoor
MWS Starter Fitting/Cable is the starting point for the MWS system. Standard 1/2" knockout.
indoor/outdoor
MWS Circuit T provides circuit selection and allows disconnect without interrupting power
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS Extender Calbe continues the MWS circuit between components that interface with light fixtures
indoor/outdoor
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations.The MWS Drop Cable with DALI Control (DC-5LT) feeds power and control to wall or ceiling fixtures from a compatible Circuit T (CT) or Splitter (SP). See the CT or SP specification sheets for compatibility details.
indoor/outdoor
The MWS Fixture Fitting (FF) or Power Fitting (PF) feeds power to lighting fixture while allowing the circuit to feed through to the next fixture. Tap leads on FF are 18ga, tap leads on PF are 12ga.
indoor/outdoor
Introduces local switching into the MWS system. Switch Drops may be installed during rough-in or renovations. Extender Cables bring power from starters to the first Switch Drop and between consecutive Switch Drops. Switch Drops can also be connected together for multiple switch locations. All unused outlets require a MWS dust cover.
indoor/outdoor · office general
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Starter Fitting with DALI Control (ST-5LT) is the starting point for bringing the power and control system together. Converts conventional wiring and merges control wiring into MWS. Branch circuits are fed from the panel to a junction box with conduit and wire, while control circuits are run as Class 1 to meet local codes. The MWS Starter is mounted to the junction box with a ½” threaded lock nut connector. Power and control wires are then connected to the appropriate leads of the Starter
indoor/outdoor
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T Cable with DALI Control (TC-5LT) feeds power and control wiring to wall or ceiling fixtures while feeding downstream to another fixture. Compatible MWS Extender Cables (EC) are used connect either end of the TC-5LT. See the Extender Cable specification sheet for compatible models.
indoor/outdoor
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS T Cable with DALI Control Only (TC-PP5LT) feeds only the control wiring to wall or ceiling mounted DALI controls, while feeding both power and control downstream to another fixture. Compatible MWS Extender Cables (EC) are used connect either end of the TC-PP5LT. See the Extender Cable specification sheet for compatible models.
indoor/outdoor
Orion Energy Systems VTON2 product is NSF/ANSI Standard 2. Durable, versatile fixture suitable for demanding environments that require a watertight seal such as food-processing facilities, milking parlor, wash down applications and cooler/ freezer environments.
indoor · high bay aisle
Durable, versatile high bay fixture suitable for demanding environments that require a watertight seal such as foodprocessing facilities, milking parlor, wash down applications, and cooler/freezer environments.
indoor/outdoor
Orion Energy Systems VTOD2 product is NSF/ANSI Standard 2. Durable and versatile fixture suitable for demanding environments that require a dust-proof fixture or watertight seal such as food-processing facilities, breweries, agricultural, wash down applications and cooler/freezer environments.
indoor/outdoor
Durable and versatile fixture suitable for demanding environments that require a dust-proof fixture or watertight seal such as food-processing facilities, breweries, agricultural, wash down applications and cooler/freezer environments
outdoor · parking area · pole
The ALLP1 is a cost-effective area light designed to offer optimal flexibility to the customer. The ALLP1 provides multiple combinations of options to maximize labor and energy savings.
outdoor · flood exterior
Architectural design includes eight different lumen outputs for replacing existing HID floods while delivering exceptional energy savings
outdoor · garage parking structure
The Harris FLGA4 is a cost effective and high-performance family of flood luminaires. The family includes nine different lumen outputs to meet most exterior requirements for parking lots, driveways, walkways, and building exteriors. Ideal to replace any existing HID floods and deliver exceptional energy savings.
indoor · high bay aisle
The HARRIS HHSL2 is an innovative high bay and is industry leading with up to 198 LPW at 80 CRI. The low profile design offers energy savings, low maintenance, and control options for low or high bay settings in industrial, commercial, and retail applications.
indoor · high bay aisle
The HARRIS HHSL2 is an innovative high bay for new construction or retrofit. The low profile design offers energy savings, low maintenance, and control options for low or high bay settings in industrial, commercial, and retail applications.
indoor · high bay aisle
The Harris HHUF4 is ideal for a wide array of applicationsincluding harsh environments in agricultural, industrial and manufacturing. The HHUF4 delivers energy and maintenance savings over traditional HID and fluorescent fixtures.
indoor · office general · recessed
Industry’s first patented LED troffer retrofit contained within the door frame. Installs in as little as a few minutes and with minimal disruption to the workplace. Retrofits into the existing housing 1' x 4', 2’ x 2’ and 2’ x 4’ T8/T12 fluorescent troffers.
indoor · high bay aisle
The HARRIS Patriot Slimline high bay fixture provides a sleek new construction or retrofit solution. The low profile design offers energy savings, low maintenance, and control options for high and low bay settings in industrial, commercial, and retail applications.
indoor · high bay aisle · surface
The HARRIS HQAS1 strip fixture is ideal for low bay, assembly line, surface mount, continuous run or task options in warehouse and retail environments. Translucent end cap option allows for seamless fixture look mounted end-to-end. Ideal LED replacement for linear T12/T8 fluorescent linear fixtures to maximize energy savings. Selectable CCT and wattage in the field.
indoor
The HARRIS SFHC2 strip fixture is an ideal luminaire for new construction applications. For use in areas such as manufacturing, distribution, warehouse, and retail settings.