LPX Series
LPX Series LED Exit is a polycarbonate unit suitable for general purpose applications. With the new advanced standard features and industry-leading innovations, they are now the most universal, energy-friendly, and safest exits in their class. This series is also easy to stock and install and is a replacement for the CCX Series.
Cross-References
30 equivalents across 13 brands
Compare top 3 →- spec →
Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel
- category
- environment
- voltage
- spec delta
- wattage: 5W → 2W
- spec →
Rugged 20 gauge steel luminaires comply with the latest New York City codes and performance standards. Available in exit or exit/emergency combination units. FEATURES 120 / 277VAC Dual voltage operation 20-gauge steel housing with white powder coating Large 8" font with 1" stroke Includes single and double faces Removable knockout chevron directional arrows Illuminates for 90 minutes during power failure Meets City of New York state codes HOUSING 20-gauge steel housing includes an additional face for a double-sided exit sign. Adjustable emergency heads feature a unique twist-locking collar. Low profile snap-together. Snap-out knockouts for wiring. MOUNTING The steel case includes two knockouts for side of wall mounting (hardware included). LABELS AND LISTINGS 5 year limited warranty Meets City of New York emergency code requirements (NY Approved) NEC OSHA cULus Listed for damp locations
- category
- environment
- voltage
- spec →
The Chloride Patron LED Emergency Unit is a low profile unit offers many options for indoor or outdoor lighting applications. Its stylish design is an excellent choice as an architectural grade emergency lighting unit for illuminating an interior or exterior path of egress.
- category
- environment
- voltage
- spec →
The DLTLC from Holophane is a wet location low-profile combination of exit and emergency light. Available with red or green letters. It is ideal to safely illuminate the path of egress above-the-door
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → UNV
- spec →
Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.
- category
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 5W → 2W
- spec →
The TCE Series from the Lithonia Lighting® Indura® Family is ideal for City of Chicago applications requiring a steel exit sign. The TCE is constructed out of 20-gauge steel with a white powder coat
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120-347V
- spec →
LED EMERGENCY DECORATIVE Black or white finish. 1 watt per head. Options include self-diagnostics.
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120-277V
- wattage: 5W → 1W
- spec →
This TCL Series EXIT HERE w/Down Arrows (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
- spec →
Nora's new 20 gauge steel body exit units are suitable for rugged applications and New York City approved. Exit sign utilizing Light Emitting Diode (LED) modules as the primary light source for economy operation NX-550 includes a backup NiCad battery for 90 minutes operation under emergency applications where primary power source has been interrupted or terminated. NX-550-LED/R - Red Letters with White Housing NX-505-LED/RB - Red Letters with Black Housing BODY 14-5/8" Width X 10-1/2" Height X 2-1/4" Depth 20 gauge Steel construction Black & White finish FACE Single or double face 8" high text with 1" stroke Snap-out chevron New York approved MOUNTING Universal - Wall, side, or ceiling Mounting hardware and canopy included ELECTRICAL Voltage Dual 120V / 277V input (0.038A / 0.017A) Automatic solid state switching and charging Light Source Long life LED sources Battery NiCad (nickel-cadmium) 3.7 Watts @ 120V replaceable battery included 90 minute emergency operation Internal solid state charging circuit Testing High-charge/ready operation indicator light Test button Circuitry Protection Short circuit protection LIFE EXPECTANCY LED sources and PC circuitry are rated for approximately 25 years with no change in illumination level 5 year warranty on materials and workmanship APPROVALS UL Listed NFPA-101 Meets City of New York emergency code requirements (NY Approved) Suitable for damp location
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → 120V/277V
- spec →
Ideal for high-abuse, cold weather (CW option-down to -40°C), and wet location applications such as schools, security areas/prisons and parking garages. NEMA 4X option available for wet and
- category
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 5W → 20W
- spec →
The Chicago-approved EXIT/CHICAGO exit sign can function as either a full-time AC powered unit or an emergency unit with battery backup.
- category
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
The TCC Series from the Lithonia Lighting® Indura® Family is ideal for City of Chicago applications requiring a steel exit combo. The TCC is constructed out of 20-gauge steel with a white powder coat
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120-347V
- spec →
HAZARDOUS LOCATION POLYCARBONATE BUY AMERICA OPTION Red or green letters. Single or double face available. Grey housing color. Field selectable knockout chevron directional indicators. Options include self diagnostics and tamperproof hardware. IP66. Rated for Class 1, Division 2, Groups A, B, C and D.
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120/277V
- spec →Signal-Tech11446 (Tcl734 Rrr A044/120 277 Vac) Exit | Up Arrows | Right Arrows (120 277 Vac) Led Signweak
This TCL Series EXIT | Up Arrows | Right Arrows (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120-277VAC
- spec →
Suitable for use in Class I, Div. 1, Groups C& D, Groups IIA & IIB; Groups IIA, IIB + H2 &IIC; Class I, Div. 2, Groups A, B, C & D; Class II Div. 1&2, Groups E, F & G; and Class III hazardous
- category
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
Remote Capable Compact Thermoplastic Exit Sign Ultra-bright, energy efficient, long-life Red or Green LED EXIT sign illumination. Selectable Red/Green (RG) version available. Injection-molded, engineering grade, 5VA flame retardant, high-impact, thermoplastic in white or black finish. Snap-out Chevron directional indicators.
- category
- environment
- voltage
- spec delta
- voltage: 277V → 120-347V
- wattage: 5W → 350W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Sure-Lites
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Georgia GA1 agency
- Ardd + WinterCooper (Eaton)
Atlanta · Savannah
Hawaii HI1 agency
- Sunburst DesignsCooper (Eaton)
Statewide
Idaho ID1 agency
Boise
Illinois IL2 agencies
Central
- The Lighting DigestCooper (Eaton)
Chicago
Indiana IN1 agency
- Specified Lighting Systems of IndianaCooper (Eaton)
Statewide
Iowa IA1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kansas KS1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kentucky KY1 agency
- Lighting AssociatesCooper (Eaton)
Louisville
Louisiana LA1 agency
- WKA LightingCooper (Eaton)
Baton Rouge · New Orleans · Shreveport
Maine ME1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Maryland MD1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Massachusetts MA1 agency
- Reflex Lighting GroupCooper (Eaton)
Boston · Springfield
Michigan MI2 agencies
- Clarus Lighting and ControlsCooper (Eaton)
Detroit
- Crites, Tidey & AssociatesCooper (Eaton)
Grand Rapids
Minnesota MN1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Mississippi MS1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
Missouri MO2 agencies
- Mercer-ZimmermanCooper (Eaton)
Kansas City
St. Louis
Montana MT1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Nebraska NE1 agency
- Mercer-ZimmermanCooper (Eaton)
Omaha
Nevada NV2 agencies
- CAL LightingCooper (Eaton)
Reno
- Nevada Sales AgencyCooper (Eaton)
Las Vegas
New Hampshire NH1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
New Jersey NJ2 agencies
- Enterprise Lighting SalesCooper (Eaton)
Northern NJ
- Lighting SolutionsCooper (Eaton)
Southern NJ
New Mexico NM1 agency
- Schroeder SalesCooper (Eaton)
Statewide
New York NY2 agencies
- Enterprise Lighting SalesCooper (Eaton)
NY City metro
- Quality Lighting SystemsCooper (Eaton)
Upstate
North Carolina NC2 agencies
- Q.LightingCooper (Eaton)
Greensboro · Raleigh
- Bodwell & AssociatesCooper (Eaton)
Charlotte
North Dakota ND1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Ohio OH2 agencies
- Clarus Lighting and ControlsCooper (Eaton)
Toledo
- Lighting & ControlsCooper (Eaton)
Cincinnati · Cleveland · Columbus
Oklahoma OK1 agency
- Premier Lighting SalesCooper (Eaton)
Statewide
Oregon OR1 agency
- SolusCooper (Eaton)
Statewide
Pennsylvania PA2 agencies
- Lighting SolutionsCooper (Eaton)
Philadelphia
- Architectural Lighting SalesCooper (Eaton)
Pittsburgh
Rhode Island RI1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
South Carolina SC1 agency
- Ardd + WinterCooper (Eaton)
Statewide
South Dakota SD1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Tennessee TN2 agencies
- Ardd + WinterCooper (Eaton)
Chattanooga · Knoxville · Nashville
- Perkins-Everitt Lighting & ControlsCooper (Eaton)
Memphis
Texas TX4 agencies
- Peterson Scharck & AssociatesCooper (Eaton)
Houston
- Legacy LightingCooper (Eaton)
Austin
- Texas Lighting SolutionsCooper (Eaton)
Dallas · El Paso
- 2M LightingCooper (Eaton)
San Antonio
Utah UT1 agency
- Quantum LightingCooper (Eaton)
Statewide
Vermont VT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Virginia VA1 agency
- JJM AssociatesCooper (Eaton)
Norfolk · Richmond · Roanoke
Washington WA2 agencies
- SeaTac Lighting & ControlsCooper (Eaton)
Seattle
- Ambient LightingCooper (Eaton)
Spokane
West Virginia WV1 agency
- Robert S. Kimball AssociatesCooper (Eaton)
Statewide
Wisconsin WI1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Wyoming WY1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.