WDG3QF-FLOOD-AM
Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector Nickel-Plated Stainless Steel Hardware. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or Use ½˝ Surface Mount Conduit. Heavy-Duty Adjustable Knuckle, Slipfitter, or Two-Piece Swivel Bracket, Sold Separately, Field Installed. AmberLED: Aluminum Boards Wattage: AmberLED Array: 40w, System 48w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with QSSI Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
IC Rated for direct contact with insulation Canless Module works with Koto™ frames and power packs Driver specified for 120V (Triac/ELV) or 120/277V (0-10V/Triac/ELV) dimming Works in 2″, 3″, 4″ and 6″ Canless Koto™ twist-on trims Push-&-Twist connector on module for easy installation Standard 38° Lens installed, 25° and 60° lens included with each module - Optional Lens: 18° (EP731C) Optional: Louver ( L45 ), Linear Lens ( L46 ), Spread Lens ( L47 ), Frosted Lens ( L49 ), White Koto Snoot ( L50W ). Black Koto Snoot ( L50B ), Color Shifter ( L51 ), Blue Lens ( L52 ), Pink Lens ( L53 ) Excellent color rendering 95+ CRI Offered in 2700K, 3000K, 3500K, 4000K, Sunset Dimming (Dims from 3000K to 1800K), & Human Centric (Dims from 4000K to 2200K) Title 24 JA8-2022 Compliant Life span of 50,000 hours L70 Covered by U.S. PATENTS and Patents Pending Optional Reflectors: 15º (EP735C), 25º (EP736C), 38º (EP737C), 60º (EP738C)
- category
- environment
- voltage
- beam angle
- dimming
- spec →
Our entire team takes great pride in our dedication to providing innovative in-stock lighting solutions that typically ship in 2-3 days with the product reliability and quality that you can always depend on from ETi SSL.
- category
- environment
- mounting
- voltage
- wattage
- beam angle
- +1 more
- spec →
Efficient Illumination for High-Ceiling Spaces. Signum 16 is a foundational high-ceiling luminaire that reflects Meteor’s early entry into the large-scale architectural lighting market. Its perforated cylindrical form balances visual presence with restraint, making it a familiar yet enduring solution for expansive interior spaces. With efficiency and clarity in mind, Signum 16 focuses on delivering consistent, high-quality white light without unnecessary complexity. With output reaching up to 23,000 lumens at 117 lm/W, Signum 16 provides reliable illumination for large volumes while maintaining energy performance. DMX control compatibility allows the fixture to integrate into more advanced lighting systems, supporting architectural environments that require both scale and control.
- category
- environment
- voltage
- beam angle
- dimming
- spec delta
- wattage: 48W → 195W
- spec →
The PFX-5608 is a highly versatile, 4-foot vapor-tight LED luminaire designed for durability and precision in demanding environments. This sensor-ready fixture features field-selectable CCT (3500K, 4000K, and 5000K) and tri-lumen output ranging from 5,000 to 7,000 nominal lumens, allowing for complete on-site customization. Built to last, it boasts an impressive L70 life of 178,000 hours and a rugged polycarbonate housing with an IK10 impact rating. It is engineered for extreme conditions with an IP65 ingress protection rating and an operating temperature range of -40 Degree C to 43 Degree C . The unit comes standard with a 0-10VDC dimming driver and offers optional emergency backups or NSF certification for food equipment zones. Installation is simplified with included surface mount kits and v-hooks, making it an ideal choice for both new construction and retrofits.
- category
- environment
- mounting
- voltage
- beam angle
- spec delta
- voltage: 120V/277V → UNV
- spec →
Constant Power Emergency LED Driver Provides voltage to the Input side of the connected load during emergency mode operation.For use with switched or unswitched fixtures.Can be used with LED lamp/luminaire loads providing up to 25W and 40W of constant power in Emergency mode. Optional remote available for manual testing.
- category
- environment
- voltage
- dimming
- housing
- spec delta
- voltage: 120V/277V → 120-347V
- wattage: 48W → 350W
- spec →
The Iridium i2 WaveStream luminaire merges classic design with cutting edge technology to provide quality illumination and superior optical control. Using the WaveStream LED direct/indirect light engine, its wide batwing distribution makes it an excellent choice for lower ceiling applications and areas where ceiling uniformity is important. Available in 4’ and 8’ sections with a multitude of options, the Iridium i2 WaveStream is well suited for commercial office spaces, schools, libraries and other architectural interiors. The WaveStream LED direct/indirect light engine is also available in several other popular Corelite series including the Element, Loft, Minigator and Vertechs.
- category
- environment
- voltage
- beam angle
- dimming
- spec delta
- voltage: 120V/277V → UNV
- wattage: 48W → 87.7W
- spec →
The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems
- category
- environment
- voltage
- beam angle
- spec delta
- voltage: 120V/277V → 120V
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- dimming
- spec delta
- wattage: 48W → 12.1W
- spec →
A 3" aperture specification grade adjustable housing platform designed for below the ceiling installations. Accepts 50W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x6 residential framing or shallow commercial installations. Insulation must be kept 3" away from top and sides of the housing. Integral Truvolt™ toroidal wound magnetic step down transformer with dual outputs compensates for dimmer losses providing full light output and is extremely low noise. The fixture is ideal when remodeling older construction. A complete installation requires two components; the RPN3MR remodel platform and a 3" IRiS element. Elements may be changed after installation to provide a variety of distributions. Elements are visually identical and match when new fixtures and remodel fixtures are installed in the same job site. Not suitable for use with the E3SA or the self flanged option.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- beam angle
- dimming
- lens
- +1 more
- voltage: 120V/277V → 277V/347V/480V
- wattage: 48W → 450W
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- beam angle
- dimming
- spec delta
- voltage: 120V/277V → 277V/347V/480V
- spec →
Metalux LED High Bay with superior performance in a durable, compact design
- category
- environment
- voltage
- beam angle
- dimming
- spec delta
- voltage: 120V/277V → UNV
- wattage: 48W → 266W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →