NSEM6ND
Decorative surface mount enclosure used to match the same appearance as an enclosure with an emergency driver. FEATURES Compatible with 6" ELO & ELO+ Matches the same appearance as enclosure with emergency driver COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING ENCLOSURE WITH BATTERY NSEM-6WD: Enclosure with Emergency Driver
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Little Inch Connecting System (LINCS) sets the standard for flexible, inconspicuous task lighting. LINCS unique labor-saving plug-together design affords premium quality at a low installed cost. The attractive extruded aluminum design dissipates heat, is durable, lightweight and corrosion resistant. Miniature 1" profile. Fluorescent lighting provides ideal rendering of task areas and displayed objects. Integral Occupancy Sensor available to reduce energy consumption.
- category
- environment
- lumens
- CRI
- spec →
Bodine Emergency LED Drivers - Conduit, | Bodine
- category
- environment
- lumens
- wattage
- spec →
Dimmable ELV, Triac or 0-10V depending on driver used. Same LED light engine for 850 and 1100 lumens (see housings) cUL Listed for Direct Contact with insulation Works with compatible ceilings up to 1¼″ Height allows for use in ceilings with under 5" depth. Ceiling thickness can be reduced from fixture depth. 38° Standard beam with optional 28° and 60° Wet Location Rated for Indoor and Outdoor Use JA8-2016-E, cUL, and Energy Star Qualified Life Span 50,000 Hours L70 U.S. Pat. 10,125,959
- category
- environment
- lumens
- CRI
- spec delta
- wattage: 15W → 8.6W
- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- mounting
- lumens
- CRI
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- lumens
- CRI
- spec delta
- wattage: 15W → 32W
- spec →
Designed with aesthetics as a high priority, the tasteful FVS4 combines style with strength. With architectural matte white paint standard, allow the FVS4 in either 16 or 18 gauge steel to operate in the most demanding environments. Thick polycarbonate lenses protect the fixture from high abuse situations. Continuous run the fixtures using the end KOs, and choose from 2', 3', 4', and 8' lengths.
- category
- environment
- mounting
- CRI
- wattage
- spec →
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
- category
- environment
- lumens
- CRI
- spec delta
- wattage: 15W → 8.3W
- spec →
60 Linear Surface is a continuous flush lens surface mounted linear luminaire with ultra clean design for absolute minimal appearance. Easily installed internal LED tray assembly with integral driver.
- category
- environment
- mounting
- CRI
- wattage
- spec →
Includes 35.1 watt, 1237 delivered lumens, 2700K 90 CRI LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. ADA compliant. Mounts vertical or horizontal. 120V-277V.
- category
- environment
- lumens
- CRI
- spec delta
- wattage: 15W → 35.1W
- spec →
The HTGDU-3W is a 3-inch direct/indirect rotational arm mount fixture featuring Microstructure EdgeTech Optics™ for superior optic control and seamless illumination. With full 361° locking rotational hubs, individually controlled direct and indirect outputs, and minimalist MEO™ design, it offers flexible performance and clean aesthetics. Includes toolless “Push to Eject” access, integral or remote driver options, precision-machined components, and SLO up to 1480 lm/ft. 90+ CRI standard with Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant.
- category
- environment
- lumens
- CRI
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Nora Lighting
Full directory →3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.
Iowa IA1 agency
Statewide
Nebraska NE1 agency
Omaha
Nevada NV1 agency
Las Vegas
Wisconsin WI1 agency
- ERI / illuminateCurrent
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.