DLE621205KSQWH
The DLE Edge Lit LED Downlight Series offers an attractive visual aesthetic with a low profile in both round and square apertures. The edge-lit technology uses a reflective light guide panel that disperses light through a diffused lens, making it a practical and economical solution with high performance. The ultra-thin fixture depth and off-board driver allow for more flexible installation and increased lifetime with improved thermal management. The DLE fixture uses a plenum-rated cable connector to link the downlight module to the remote driver box and then pops into place with its adjustable, spring-loaded retention tabs for a secure fit, eliminating the need for a J-box or recessed housing. Adding light in tight spaces such as hallways, bathrooms, basements, entryways, porches, stairways, work areas, utility closets and corridors just got easier.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The LITELUME™ LL-IMODCR6 recessed canless integrated module downlight delivers a modern versatile look with aesthetic appeal. Field selectable performance with 5 CCT options ranging from 2700K to 5000K. Available in 6", featuring a Polycarbonate diffuser. with white baffle reflector. Easy installation with its integrated J-box, mounts directly in a hole cut into drywall or ceiling panel, or pair it with our universal new construction mounting plate for use with joist and T-grid ceilings.
- category
- subcategory
- environment
- mounting
- voltage
- spec delta
- cct: 5000K → 2700K
- wattage: 6W → 14W
- spec →
The Class D3X architectural recessed troffer offers subtle, clean geometry in a fully luminous door-frame design. This contemporary, high quality luminaire provides superior visual comfort and is dedicated to the latest solid-state lighting and driver technology for optimal performance and energy efficiency. Available in 2x2, 2x4, and 1x4 sizes, the D3X is an excellent choice for commercial office spaces, schools, hospitals or retail merchandising areas.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- voltage: 120V → UNV
- wattage: 6W → 87.7W
- spec →
ORL, operating room light, provides supplemental, asymmetric / symmetric lighting in the surgical suite / operating room. Typically positioned around the perimeter, the ORL is available in 2x2, 2x4, and 1x4 sizes, IP66 compliant, wet location listed, NSF rated, MILSTD 461G compliant - and is the perfect choice for the sophisticated surgical suite. Choose green LEDs for variety of benefits also.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- wattage: 6W → 20W
- spec →
The HALO Night Light Canless Downlight comes in sizes 4" and 6" and features two modes: downlight mode for general area illumination and night light mode for a gentle glow illuminating the acrylic trim. Simply toggle your light switch to change modes. Choose your color temperature directly on the fixture for the downlight mode. With the flick of a switch, you can choose between 5 color temperatures ranging from warm (2700K) to daylight (5000K) or choose the warm dimming option to mimic candlelight for mood setting in any space. This canless direct mount downlight does not require a housing for installation. The slim design fits in 2x4 construction or ultra-shallow plenum spaces. The smooth lens and even glow make this the perfect solution in a multitude of residential applications including children’s rooms, bathrooms, hallways, or any space you may need a night light.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- wattage: 6W → 12W
- spec →
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Starter Fitting with DALI Control (ST-5LT) is the starting point for bringing the power and control system together. Converts conventional wiring and merges control wiring into MWS. Branch circuits are fed from the panel to a junction box with conduit and wire, while control circuits are run as Class 1 to meet local codes. The MWS Starter is mounted to the junction box with a ½” threaded lock nut connector. Power and control wires are then connected to the appropriate leads of the Starter
- category
- subcategory
- environment
- voltage
- spec →
LD2B combines energy efficiency with superior cutoff, optical performance and control
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- spec →
Model LTN-3R (550VA – 1.3kVA)
- category
- subcategory
- environment
- voltage
- spec →
The Chisel recessed luminaire adds dimensionality across grid ceilings. Chisel 1x2 features an extruded aluminum housing, various directional gradients and textured patterns, including pyramid,
- category
- subcategory
- environment
- mounting
- voltage
- CCT
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps NICOR Lighting
Full directory →27 rep agencies carry the Nicor Lighting line across 45 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
Fresno · Sacramento · San Francisco
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Commercial Lighting SalesCurrent
Statewide
Florida FL2 agencies
Panhandle
Fort Myers · Jacksonville · Miami · Orlando · Tampa
+35 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.