MODEL-LTN-3R-550VA-1-3KVA
Model LTN-3R (550VA – 1.3kVA)
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The LITELUME™ LL-IMODCR6 recessed canless integrated module downlight delivers a modern versatile look with aesthetic appeal. Field selectable performance with 5 CCT options ranging from 2700K to 5000K. Available in 6", featuring a Polycarbonate diffuser. with white baffle reflector. Easy installation with its integrated J-box, mounts directly in a hole cut into drywall or ceiling panel, or pair it with our universal new construction mounting plate for use with joist and T-grid ceilings.
- category
- subcategory
- environment
- voltage
- spec →
The HALO Night Light Canless Downlight comes in sizes 4" and 6" and features two modes: downlight mode for general area illumination and night light mode for a gentle glow illuminating the acrylic trim. Simply toggle your light switch to change modes. Choose your color temperature directly on the fixture for the downlight mode. With the flick of a switch, you can choose between 5 color temperatures ranging from warm (2700K) to daylight (5000K) or choose the warm dimming option to mimic candlelight for mood setting in any space. This canless direct mount downlight does not require a housing for installation. The slim design fits in 2x4 construction or ultra-shallow plenum spaces. The smooth lens and even glow make this the perfect solution in a multitude of residential applications including children’s rooms, bathrooms, hallways, or any space you may need a night light.
- category
- subcategory
- environment
- voltage
- spec →
MWS, Modular Wiring Systems, provides low cost installation of circuit wiring for lighting and power. Using modular components that plug together, MWS can be installed in a fraction of the time of hardwiring. Plus, MWS offers the advantage of relocating fixtures and outlets for future renovations. The MWS Starter Fitting with DALI Control (ST-5LT) is the starting point for bringing the power and control system together. Converts conventional wiring and merges control wiring into MWS. Branch circuits are fed from the panel to a junction box with conduit and wire, while control circuits are run as Class 1 to meet local codes. The MWS Starter is mounted to the junction box with a ½” threaded lock nut connector. Power and control wires are then connected to the appropriate leads of the Starter
- category
- subcategory
- environment
- voltage
- spec →
Pickleball/Tennis Court Lighting Adding on to our World Class PLED Optical Portfolio, U.S. Architectural Lighting has developed an Outdoor Court Lighting specific optical package, the Type IV-CL. This application driven optic was designed for excellence in illuminating all types of court lighting. From recreational to tournament courts, it provides for the highest levels of visual acuity and light control on the court. For further versatility and a contemporary aesthetic, we offer our Court Lighting Optical Package with our Baseline (BAS) series of Luminaires. The BAS efficiently adapts to a wide variety of court lighting configurations. Individual optical panel rotatability allows for placement of light irrespective of the orientation of the luminaire, thus making aesthetic compatibility distinct from a site's optical needs. Baseline puts a whole new level of control in the hands of the illumination professional relative to fixture placement and lighting patterns. With our Baseline luminaire we have changed the game. Our unique fixture and optical design allows Baseline to surpass illumination and uniformity requirements when installed parallel to the court along the sideline and baseline. This frees players from distractions and gives designers an exciting new tool for Court Lighting Layout in Recreational, Club, and Professional settings.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- spec →
Adjustable Spot 4 Light (2X2) Trim
- category
- subcategory
- environment
- voltage
- spec →
An LED edge-lit panel inside a compact, open stainless steel form allows the Tria to deliver superior illumination. Finishes: White, Polished ChromeSizes: 5in CCT: 30K
- category
- subcategory
- environment
- voltage
- spec →
<h5><strong>Meet BEAM V2 (7178). Model #'s 7176 and 7177 have officially merged to create the now-current 7178.</strong></h5>Key notes: This product is ADA compliant in its standard configuration. Unlike the 7176/7177, the 7178 mounts to a 2x4 single gang j-box, due to its redesigned slim housing. If needing to mount to a 4x4 j-box, refer to spec sheet "Accessories" section for a specifiable cover plate. The BEAM V2 is a wet location rated product featuring a modern, architectural aesthetic. With four sizes available, this product is ideal for decorative exterior facades, breezeways, commercial interiors, bathrooms, healthcare and even stairwells (battery options available). Constructed of heavy duty extruded aluminum with a stout, uniformly illuminated frosted acrylic diffuser. Contact factory for 7176/7177 replacement parts or special order requests.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- spec →
Ideal for architectural applications where aesthetic and minimal profile appearance is desired. LED sources within the adjustable housing cast a brilliant red or green illumination on letters embedded inside the acrylic face. BODY 12" Width X 8-1/4" Height X 4" Depth Extruded aluminum housing, acrylic panel, and die-cast cover plate HOUSING Galvanized steel construction FACE Single or double face. Acrylic face has rounded and finished edge for attractive appearance. Red or green 6" lettering inside face. Stick-on chevrons included. MOUNTING 24-1/2" Bar Hangers included ELECTRICAL Voltage: 120V or 277V dual input Power Consumption: 3 watts normal / 5 watts emergency operation Light Source: Long life LED sources Testing: High-charge/ready operation indicator light with test button Circuitry Protection: Short circuit and brown-out protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination BATTERY Replaceable 90-minute Ni-Cad battery included LABELS AND LISTINGS UL Listed NEC NFPA State & Municipal Certified to the energy efficiency standards of California Title 20 ACCESSORIES NEXC-R: Red stick-on chevron NEXC-G: Green stick-on chevron
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- voltage: 120V → 120V/277V
- spec →
IC Airtight for use with direct contact to insulation. Designed to fit in plenums as shallow as 2". Eliminates the need for housing. New Construction application requires mounting plate or frame. Remodel applications require no additional accessories. Wet Location allows for use indoors or outdoors. CA Title 24 and ENERGY STAR Compliant. Includes driver and Jbox. For EM Backup use KEM-ERT
- category
- subcategory
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →