MRD-WL-LED
The Mule MRD-WL-LED is ideal for wet locations, resistant to corrosive atmospheres, non-hazardous dust environments, and to water spray, splashing water or hose down locations. The adjustable LED lamps are enclosed in a fully gasketed, corrosive resistant fiberglass enclosure designed to withstand the harshest environments.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
This low profile fixture offers the lowest profile of all Nora Emergency fixtures. The light sources are held within the body of the fixture, with both beveled side panels constructed of clear polycarbonate. These features make the emergency light small enough for virtually any application, and eliminate the necessity of aiming and locking lamp heads. BODY 11-7/8" Width X 5-1/8" Height X 2-3/4" Depth Injection-molded housing with access for ceiling or wall power supply. FACE Injection molded face with two clear polycarbonate covers on beveled surfaces. MOUNTING Wall or ceiling Mounting hardware included Electrical 120/277V input Automatic solid state switching and charging Automatic reset Battery Replaceable 3.6V, 1000mAh NiCad battery for backup operation during power loss 90 minute emergency operation on fully charged battery Testing High-charge/ready operation indicator light Test button Circuitry Protection Short circuit protection Listings UL 924 NFPA 70 & NFPA 101 Suitable for damp location
- category
- environment
- voltage
- lumens
The AtLite ATLEL series provides a NEMA 4X and UL924 code compliant emergency lighting solution for extreme commercial and industrial environments. The rugged die cast aluminum housing and UV stabilized polycarbonate lens are designed to withstand harsh environmental conditions. The fixture is wet location listed with a temperature rating of -30° to 50°C (-22° to 122°F), is IP66 listed and has a Hazardous location class 1 division 2 option. Two 300 lumen LED heads provide up to 58 feet of emergency egress coverage. Labor saving self diagnostics with a photocell testing capability are standard and perform required monthly and yearly testing. Tamper resistant screws are included to make the fixture vandal resistant.
- category
- environment
- voltage
- lens
- spec delta
- voltage: 120V/277V → 277V/UNV
- lumens: 116 → 300
- spec →
The 15" Terrapin LED provides exceptional aesthetics with impressive strength and is available in 20, 30 or 40 watt lumen packages. Polycarbonate lens, clear or opal, combined with four face plates provides a choice of different styles. Choose a photocell or motion sensor for control. Select an emergency battery pack to provide egress illumination.
- category
- environment
- voltage
- lens
- spec delta
- voltage: 120V/277V → UNV
- lumens: 116 → 4875
- spec →
The Sure-Lites SELIN industrial series is a UL 924 code compliant emergency light designed to reduce total egress system cost and maintenance as well as ensure reliability in an industrial or wet location environment. It is designed to run for a minimum of 90 minutes during a power outage. Key features include a long life LED source with egress coverage up to 60 feet, a nickel cadmium battery and self-diagnostics which automates the NFPA required testing. The fixture is NEMA 4X, IP66, Title 20 compliant and has a chemically resistant fiberglass housing. This series offers remote capability from 4 watts to 10 watts and is compatible with the SureLites SRP/SRM remote series.
- category
- environment
- voltage
- housing
- spec delta
- voltage: 120V/277V → UNV
- spec →
Mini Emergency Light with two 2W fully adjustable glare-free square shape light heads for emergency light. Injection-molded thermoplastic ABS housing Innovative snap-together design allows for fast and easy installation. 250 lm (total) 3.6V, 1.5Ah battery pack for 90 minutes of emergency operation. LED Driver: 120V/277V AC, dual voltage operation integrated with LED bulb. cUL listed for damp location.
- category
- environment
- voltage
- spec delta
- lumens: 116 → 250
- spec →
The HLEMU from Holophane® is a high-performing, IP66 rated emergency unit that is designed for use in Class 1, Div 2, groups A, B, C, & D hazardous environments, meeting up to a T3C temperature
- category
- environment
- voltage
- lens
- spec delta
- voltage: 120V/277V → 120V
- spec →
The fixture emits an asymmetrical glare-free, downward directed light distribution. Softly illuminating its cut-out shape while providing an efficient horizontal illumination on the ground or floor. Perfectly fit for indoor as well as outdoor applications. The new Flindt Wall fixture joins the popular Flindt Bollard to bring expressive illumination and bold, sculptural design to indoor and outdoor spaces alike. Based on the same carved-out design as its cylindrical bollard predecessor, the Flindt Wall continues the elegant form language in the shape of a perfect circle. The Flindt Wall is distinguished by a light egress from an opening in the top that emits light down the front of the fixture, creating a subtle, glowing ring of reflected light on the transition between the concave and convex shapes. The oval shape is lifted off the mounting surface, giving the fixture a floating appearance. Designer Christian Flindt worked with a combination of software, 3D printing, and metal casting to ensure the perfect balance between proportions, curves and light in designing the three Flindt Wall sizes.
- category
- environment
- voltage
- spec →
The LEHS-EM is designed and listed for hazardous, marine, and wet locations where emergency battery backup is required. This product is ideal for replacing High Pressure Sodium (HPS) and Metal Halide(MH) fixtures for increased energy savings and maintenance.
- category
- environment
- voltage
- lens
- spec delta
- voltage: 120V/277V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Mule Lighting
Full directory →47 rep agencies carry the Mule Lighting line across 50 states. Pick your state.
Alabama AL2 agencies
Birmingham
Mobile
Alaska AK1 agency
- Arctic Sales AgencyCurrent
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
Statewide
California CA4 agencies
- Integrated LightingCurrent
Fresno
San Francisco
Sacramento
- Total Lighting Concepts
Ventura
Colorado CO1 agency
- CT Lighting & ControlsSignify (Philips)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- One Source AssociatesCurrent
Statewide
Florida FL4 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Florida Lighting AssociatesCurrent
Orlando · Tampa
Jacksonville
Panhandle
+40 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.