HLEMU-EMERGENCY-UNIT
The HLEMU from Holophane® is a high-performing, IP66 rated emergency unit that is designed for use in Class 1, Div 2, groups A, B, C, & D hazardous environments, meeting up to a T3C temperature
Cross-References
30 equivalents across 29 brands
Compare top 3 →- spec →
The AtLite ATLEL series provides a NEMA 4X and UL924 code compliant emergency lighting solution for extreme commercial and industrial environments. The rugged die cast aluminum housing and UV stabilized polycarbonate lens are designed to withstand harsh environmental conditions. The fixture is wet location listed with a temperature rating of -30° to 50°C (-22° to 122°F), is IP66 listed and has a Hazardous location class 1 division 2 option. Two 300 lumen LED heads provide up to 58 feet of emergency egress coverage. Labor saving self diagnostics with a photocell testing capability are standard and perform required monthly and yearly testing. Tamper resistant screws are included to make the fixture vandal resistant.
- category
- environment
- voltage
- lens
- spec delta
- voltage: 120V → 277V/UNV
- wattage: 30W → 5W
- spec →
The 15" Terrapin LED provides exceptional aesthetics with impressive strength and is available in 20, 30 or 40 watt lumen packages. Polycarbonate lens, clear or opal, combined with four face plates provides a choice of different styles. Choose a photocell or motion sensor for control. Select an emergency battery pack to provide egress illumination.
- category
- environment
- voltage
- lens
- spec delta
- voltage: 120V → UNV
- spec →
The Sure-Lites SELD series provides a NEMA 4X and UL924 code compliant emergency lighting solution for extreme commercial and industrial environments. The rugged die cast aluminum housing and UV stabilized polycarbonate lens are designed to withstand harsh environmental conditions. The fixture is wet location listed with a temperature rating of -30° to 50°C (-22° to 122°F), is IP66 listed and has a Hazardous location class 1 division 2 option. Two 300 lumen LED heads provide up to 58 feet of emergency egress coverage. Labor saving self diagnostics with a photocell testing capability are standard and perform required monthly and yearly testing. Tamper proof screws are included to make the fixture vandal resistant.
- category
- environment
- voltage
- lens
- spec delta
- voltage: 120V → 277V/UNV
- wattage: 30W → 5W
- spec →
Myers EPS offers a line of micro inverters for emergency lighting. The Illuminator Series LVU systems fits many compact applications.
- category
- environment
- voltage
- spec →
Universal New Construction Downlight. Product Category : 4-Inch Downlight; Product Type : Downlight; Product Shape : Round; Housing : New Construction; Environment : Damp Location; Compliance : ENERGY STAR® Certified,Certified to UL924 Standard for Emergency Lighting; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Color Rendering Index : 80-89,90-100
- category
- environment
- voltage
- spec →
Fresh take on a traditional form factor, EMERGE is packed with upgrades and optional features such as integral Battery Backup (no extension required), integral Bi-Level Dimming control (illuminates when motion is detected, dims after set period of inactivity), traditional Occupancy control (illuminates when motion is detected, turns off after set period of inactivity), and more. USA-fabricated aluminum in your choice of finish, USA-extruded acrylic diffuser. Use this architectural sconce for any application requiring general illumination, simple energy savings and egress control, and a decorative aesthetic. Designed to be just wide enough to cover a 4x4 box, making it ideal for renovations as well.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
A surface mount enclosure with an emergency LED driver for use with 6" ELO and ELO+ luminaires. It adds 1-1/2" height to the luminaire and matches the finish. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Compatible with 6" ELO & ELO+ Matching decorative enclosure also available Listed for field installation - UL 924 and CSA C2.22 No 141 Includes integral test switch ELECTRICAL Input Voltage: 120VAC, 50/60Hz Output Voltage: 123/131VDC Wattage: 3W Illumination Time: 90 minutes OPERATION When AC power fails, the driver immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. BATTERY Ternary lithium-ion battery requires 24 hours to recharge. COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING DECORATIVE ENCLOSURE NSEM-6ND: Decorative Enclosure without Emergency Driver
- category
- environment
- voltage
- spec delta
- wattage: 30W → 15W
90 Min. of Emergency Light 5°C to 50°C operating temperature. Input: 120V, 50-60Hz Output: ~110VAC (120VAC input) Output: 15W Max Compatible with EL386, EL485, EL770, EL570 series, Ply Sylo™, 4" Koto Sylo™ systems UL Listed
- category
- environment
- voltage
- spec delta
- wattage: 30W → 15W
- spec →
This 8 watt nickel-cadmium (NiCd) battery backup system is designed for use with the Edge Round 8'' flush mount (sold separately). It provides 90 minutes of power to the Edge Round 8'' flush mount to allow lighting for emergency egress or continuation of key operations during a loss of power.
- category
- environment
- voltage
- spec delta
- wattage: 30W → 16W
- spec →
The EB7T5 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB7T5 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
DMX Lighting Control Panel with Remote Control Breakers Looking for an efficient lighting control load center? The LCLC series of DMX controlled Load Centers uses motorized circuit breakers to offer a labor-saving one-panel alternative to DMX relay panels. Instead of a bulky setup with separate panels for different audio, visual, and lighting systems, a high quality LynTec lighting power control panel can solve your space issues. The economical Load Center panels require the least wall space for tight locations and are perfect if you are trying to save on valuable room. These compact and sleek panels are available in 26 and 41 circuit sizes od 3 phase, 4 wire 208Y/120Vac. Many small theaters, intimate restaurants, conference rooms, and other locations have found these incredibly useful. A Lighting Control Load Center is a traditional residential panel and consequently best suited for smaller circuit breaker counts or for applications with limited wall space. For a bigger arena, auditorium, or other venue, one of LynTec’s many other state of the art products would be more appropriate. The LCLC is more economical than the bigger panelboards, and is a great value for all of the features offered! Here are just a few of the high end features of this lighting power control: DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Many of these features make sure that your Lighting Control Load Center is convenient and easy to use, from the limited space it take up to the ability to have zone control. Save time, money, and space with the LCLC.
- category
- environment
- voltage
- spec →
The PARAFLEX PFX‑5541 is a decorative LED emergency lighting unit with universal 120–277V input, four 1.0‑watt LED heads, and a 90‑minute minimum runtime. It features a maintenance‑free NiMH battery, 5VA flame‑retardant thermoplastic housing, and is UL listed for damp locations. An optional self‑diagnostic feature is available.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- wattage: 30W → 1W
- spec →
The Entri Series of wall luminaires with modular faceplate designs provide a tasteful architectural statement equally suitable for indoor and outdoor environments. Whether providing community friendly performance in downlighting applications, or showcasing architectural features through available up and up/downlighting configurations, the Entri Series provides a palette of optical solutions to paint any surface in the right light.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- spec →
The WKP Wal-Pak Full Cutoff provides a durable and efficient exterior light source for any application requiring maximum performance and minimum maintenance. The rugged, die-cast aluminum housing, stainless steel hardware and gasket sealed optics compartment combine to make the Wal-Pak virtually impenetrable to contaminants.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- spec →
The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.
- category
- environment
- voltage
- spec delta
- voltage: 120V → 120-347V
- spec →
The EMO2A Series features two LED fully adjustable lamp heads in a contemporary design. quick installation and premium options, in a stylish and economical package. This fixture offers quick installation and premium options in a stylish and economical package.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- wattage: 30W → 3.4W
- spec →
UltraLITE Model ELU (1.5kW to 14kW)
- category
- environment
- voltage
- spec delta
- voltage: 120V → 120347
- wattage: 30W → 120W
- spec →
Branch Circuit Emergency Lighting Control Transfer Switch Lighting
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- spec →
The LCN12-WM Series takes the LCN Craftsman lantern series and creates a complementary wall mount featureing a durable cast aluminum housing with clear acrylic diffusing lenses. This fixture provides uniform illumination through advanced LED technology, making it ideal for traditional walkways and building approach as well as path of egress. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- wattage: 30W → 2.5W
- spec →
The Sebring ADA compliant sconce provides path of egress lighting with sophisticated style. Color gels can add a vivid splash of color to a space and complement...
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
- spec →
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
- category
- environment
- voltage
- spec delta
- voltage: 120V → 120/277VAC
- wattage: 30W → 1W
- spec →
The SENSORWORX Emergency Power Control device provides a simple method of converting standard light fixtures into emergency light fixures for a UL924 compliant emergency application. Designed by LVS Controls, the SWX-EPC-2 family ensures compliance with both life safety and energy codes and eliminates the wasted energy that is used when emergency lighting is kept on 24 hours a day. These devices are typically ceiling or wall mounted in a junction box with a single gang plaster ring and are usually located in the area where the emergency fixtures are installed.
- category
- environment
- voltage
- spec delta
- voltage: 120V → 120-277V
- wattage: 30W → 1200-1500W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Holophane
Full directory →60 rep agencies carry the Acuity Brands line across 51 states. Pick your state.
Alabama AL1 agency
- AMA LightingAcuity Brands
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
- Long Sales AgencyAcuity Brands
Statewide
California CA6 agencies
- sixteen5hundredAcuity Brands
San Francisco
- SDLAAcuity Brands
San Diego
- C.J.S. LightingAcuity Brands
Sacramento
- Mar Vista SalesAcuity Brands
Ventura
- C.B.C. LightingAcuity Brands
Fresno
- All 6 in the CA directory →
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
- Federated LightingAcuity Brands
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Envision Lighting SystemsAcuity Brands
Fort Myers · Tampa
- AMA LightingAcuity Brands
Panhandle
- LandrethAcuity Brands
Orlando
- Arch. Sales & IlluminationAcuity Brands
Jacksonville
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Hawaii HI1 agency
- Hawaii Lighting AssociatesAcuity Brands
Statewide
Idaho ID1 agency
- DMA - IdahoAcuity Brands
Boise
Illinois IL1 agency
- KSA Lighting & ControlsAcuity Brands
Central · Chicago
Indiana IN1 agency
- Light SourceAcuity Brands
Statewide
Iowa IA1 agency
- CSLAAcuity Brands
Statewide
Kansas KS1 agency
- Premier Lighting & ControlsAcuity Brands
Statewide
Kentucky KY1 agency
- LHI Lighting SalesAcuity Brands
Louisville
Louisiana LA2 agencies
- Lighting & Electrical Assoc.Acuity Brands
Baton Rouge · New Orleans
- Architectural Lighting AllianceAcuity Brands
Shreveport
Maine ME1 agency
- Visible LightAcuity Brands
Statewide
Maryland MD1 agency
- Federated LightingAcuity Brands
Statewide
Massachusetts MA2 agencies
- Boston Light SourceAcuity Brands
Boston
- Lighting AffiliatesAcuity Brands
Springfield
Michigan MI2 agencies
- Gasser Bush Assoc.Acuity Brands
Detroit
- West Michigan LightingAcuity Brands
Grand Rapids
Minnesota MN1 agency
- Davis & AssociatesAcuity Brands
Statewide
Mississippi MS1 agency
- Hartwell CookAcuity Brands
Statewide
Missouri MO2 agencies
- Premier Lighting & ControlsAcuity Brands
Kansas City
- St. Louis Lighting GroupAcuity Brands
St. Louis
Montana MT1 agency
- The Lighting AgencyAcuity Brands
Statewide
Nebraska NE1 agency
- CSLAAcuity Brands
Omaha
Nevada NV1 agency
- Nevada LightingAcuity Brands
Las Vegas · Reno
New Hampshire NH1 agency
- Visible LightAcuity Brands
Statewide
New Jersey NJ1 agency
- Illuminations Inc.Acuity Brands
Northern NJ · Southern NJ
New Mexico NM1 agency
- RKL Sales CorporationAcuity Brands
Statewide
New York NY2 agencies
- Illuminations Inc.Acuity Brands
NY City metro
- Point Source GroupAcuity Brands
Upstate
North Carolina NC3 agencies
- Crown Lighting GroupAcuity Brands
Charlotte
- K.B. StephensAcuity Brands
Raleigh
- R.L. Vanstory CompanyAcuity Brands
Greensboro
North Dakota ND1 agency
- Davis & AssociatesAcuity Brands
Statewide
Ohio OH3 agencies
- Gasser Bush Assoc.Acuity Brands
Toledo
- DLS GroupAcuity Brands
Cleveland · Columbus
- King LightingAcuity Brands
Cincinnati
Oklahoma OK1 agency
- Triple C Lighting & ControlsAcuity Brands
Statewide
Oregon OR1 agency
- Harry L. StearnsAcuity Brands
Statewide
Pennsylvania PA2 agencies
- Illuminations Inc.Acuity Brands
Philadelphia
- LaFace & McGovernAcuity Brands
Pittsburgh
Rhode Island RI1 agency
- Boston Light SourceAcuity Brands
Statewide
South Carolina SC1 agency
- Creative Lighting SolutionsAcuity Brands
Statewide
South Dakota SD1 agency
- Davis & AssociatesAcuity Brands
Statewide
Tennessee TN3 agencies
- DesignlightAcuity Brands
Nashville
- Clear Advantage LightingAcuity Brands
Memphis
- Lighting TrendsAcuity Brands
Chattanooga · Knoxville
Texas TX5 agencies
- Spectrum LightingAcuity Brands
Austin
- Spectrum LightingAcuity Brands
San Antonio
- RKL Sales CorporationAcuity Brands
El Paso
- LESCO Lighting + ControlsAcuity Brands
Houston
- Architectural Lighting AllianceAcuity Brands
Dallas
Utah UT1 agency
- JRCAcuity Brands
Statewide
Vermont VT1 agency
- Visible LightAcuity Brands
Statewide
Virginia VA2 agencies
- Federated Lighting VAAcuity Brands
Richmond · Roanoke
- Resource Lighting & ControlsAcuity Brands
Norfolk
Washington WA2 agencies
- The Lighting GroupAcuity Brands
Seattle
- J.C. Wright Lighting SalesAcuity Brands
Spokane
West Virginia WV1 agency
- LaFace & McGovernAcuity Brands
Statewide
Wisconsin WI1 agency
- Enterprise Lighting & ControlAcuity Brands
Statewide
Wyoming WY1 agency
- Lumen FXAcuity Brands
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.