HLCEMS410FS1E
HLCE MS Surface Mount LED Disk Lights with Motion Sensor
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
*** While Supplies Last: Replacement Item: NLOPAC-R7MSTW *** The AC Opal Montion Sensor LED Series is designed to surface mount over a standard junction box. The low profile luminaire produces even illumination and integral PIR sensor activates when motion is detected. After 3 minutes of no motion, the fixture automatically turns off. Features: Surface mounts to most standard junction boxes PIR (passive infrared) motion sensor for easy on/off operation PIR sensor can detect motion up to 16' diameter pattern at 8' mounting height Retrofit into an existing recessed housing with torsion spring kit (ordered separately) Suitable for use in closets when installed in accordance to NEC® Section 410.16 (A)(1) and 410.16 (C)(1) Lumens / Wattage: 1050lm / 15W Color Temperature: 4000K Color Rendering Index: 90+ Finish: White Optional Accessories: NLOPAC-56RECKIT-2 = Retrofit Kit for mounting on 5" or 6" recessed housings
- category
- environment
- mounting
- voltage
- lumens
- CCT
- +3 more
- spec →
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- voltage: 120V → UNV
- spec →
Introducing the V360 LED, an outdoor IP65 LED surface lighting solution that delivers top performance and energy efficiency. This product is stocked in our German warehouse for quick shipping and can be in your hands with just a 1-2 week lead time. The V360 LED features 3 CCT selectable via dip switch, allowing you to customize the color temperature to your preference. With quick and easy installation, this lighting solution is perfect for any outdoor setting. Additionally, the V360 LED is available with or without a motion sensor, providing you with the flexibility and convenience you need for your outdoor lighting needs.
- category
- environment
- voltage
- CCT
- housing
UL 1598 Classified Retrofit Kit; AC Driver-On-Board Technology; Data per NVLAP accredited laboratory; TRIAC dimmable to 5% (forward and reverse phase); Energy star CSD; 5 year warranty. Specifications • Input voltage: 120VAC; 50/60Hz • 13W, 14W, & 23W Models • Available in 3000K or 4000K • Constant current design •
- category
- environment
- voltage
- CCT
- wattage
- spec →
Eclipse Curve Ceiling Mount Luminaire. Color Rendering Index : 90-100; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Driver Orientation : Integrated; Light Distribution Detail : Spot,Medium,Flood,Wide Flood; Lumen Output : 501-1000,1001-1500,1501-2000,2001-3000,3001-4000; Mounting Type : Ceiling Mount; Listings : cETLus for Dry Locations,Title 24 Part 6 JA8,DLC® Listed,Declare Compliant; Product Type : Ceiling Mount
- category
- environment
- mounting
- voltage
- CCT
- CRI
- spec →
The Little Inch Connecting System (LINCS) sets the standard for flexible, inconspicuous task lighting. LINCS unique labor-saving plug-together design affords premium quality at a low installed cost. The attractive extruded aluminum design dissipates heat, is durable, lightweight and corrosion resistant. Miniature 1" profile. Fluorescent lighting provides ideal rendering of task areas and displayed objects. Integral Occupancy Sensor available to reduce energy consumption.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- voltage: 120V → UNV
- spec →
Dimmable ELV, Triac or 0-10V depending on driver used. Same LED light engine for 850 and 1100 lumens (see housings) cUL Listed for Direct Contact with insulation Works with compatible ceilings up to 1¼″ Height allows for use in ceilings with under 5" depth. Ceiling thickness can be reduced from fixture depth. 38° Standard beam with optional 28° and 60° Wet Location Rated for Indoor and Outdoor Use JA8-2016-E, cUL, and Energy Star Qualified Life Span 50,000 Hours L70 U.S. Pat. 10,125,959
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- voltage: 120V → UNV
- spec →
LED INDOOR SURFACE CLOSET LIGHT FIXTURE The NEPTUNE Series 533 is a surface closet light with integral occupancy sensor. The unit has detection range of 7’6” in height and 15’ in diameter. Standard 120v, 3000°K.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- spec →
Includes 35.1 watt, 1237 delivered lumens, 2700K 90 CRI LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. ADA compliant. Mounts vertical or horizontal. 120V-277V.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- wattage: 12.1W → 35.1W
- spec →
The Elena collection from AFX is a Sleek LED undercabinet available in 5 different sizes and 2 finishes. With a pivoting head and user-selectable color temperature, the Elena allows you to get light where you need and in the desired warmth for your application. Use the color temperature switch on the fixture to choose from 5 available color temperatures: warm white 2700K, 3000K, 3500K, 4000K and a daylight mimicking 5000K. As an added benefit, sizes larger than 10'' include USB A and USB C connectors for convenient charging of phones and tablets. Each of the Elena undercabinet lights are fully dimmable via TRIAC or ELV dimmers and are linkable with our optional connector cables. Simply hardwire or plug-in one unit and then use the linking cables to extend a system throughout your kitchen.
- category
- environment
- voltage
- CCT
- CRI
- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- mounting
- voltage
- lumens
- CCT
- +4 more
- voltage: 120V → UNV
- spec →
The HTGDU-3W is a 3-inch direct/indirect rotational arm mount fixture featuring Microstructure EdgeTech Optics™ for superior optic control and seamless illumination. With full 361° locking rotational hubs, individually controlled direct and indirect outputs, and minimalist MEO™ design, it offers flexible performance and clean aesthetics. Includes toolless “Push to Eject” access, integral or remote driver options, precision-machined components, and SLO up to 1480 lm/ft. 90+ CRI standard with Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- voltage: 120V → 120-277V, 347V
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- voltage: 120V → 120-277V
- wattage: 12.1W → 32W
- spec →
The LITELUME™ LED Gooseneck Premium (LL-GNP) decorative luminaire incorporates a general light distribution for most applications. Constructed from heavy duty die-cast aluminum, the housing boasts outstanding corrosion protection, and unmatched versatility. Featuring 2700k, 3000k, 4000k, 5000k, 6500k CCT field selectable kelvin options along with an integrated photocell & cap. Ideal for multi-family, community and many other commercial & residential applications.
- category
- environment
- voltage
- CCT
- lens
- spec delta
- voltage: 120V → UNV
- spec →
TCS WiFi Smart Transformer: 150W/300W, stainless steel, smart app-controlled, 3 zones with dimming/scheduling, continuous power Smart Zone, 10-year warranty.
- category
- environment
- voltage
- spec delta
- wattage: 12.1W → 300W
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- lumens: 1035 → 120000
- wattage: 12.1W → 850W
- spec →
LX1.8 architectural linear luminaire housing from 1.8” wide aluminum extruded profile, available in 2, 4, and 8-Ft length with White, Black finish; integral driver, frosted polycarbonate lens.
- category
- environment
- voltage
- CCT
- lens
- spec delta
- voltage: 120V → UNV
- wattage: 12.1W → 80W
- spec →
The electronic “button type” photocontrol has the same features and performance of electronic twist-lock photocontrols. Energy efficiency is maintained with tight On/O ratios and “non-drift operation”. Maintenance costs are reduced through a cool running DC circuit. Life expectancy is up to three times longer than traditional heat generating thermal relay designs.
- category
- environment
- voltage
- spec delta
- wattage: 12.1W → 1W
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- lumens: 1035 → 10904
- wattage: 12.1W → 86.9W
- spec →
LEM04 This product webpage has been discontinued, please see the suggested products below or contact your local sales representative.
- category
- environment
- voltage
- spec delta
- wattage: 12.1W → 4W
- spec →
The nLight® nWSXA is a low voltage wall switch with integrated sensors providing local control of lighting zones featuring toggle and/or raise lower. The sleek, modern design of the nWSXA enhances
- category
- environment
- voltage
- spec →
Square Canopy Luminaire Field Selectable Output & CCT The AMCP-SR10 is a versatile, field-customizable LED canopy light with selectable output from 3,000 to 12,000 lumens. It features CCT selection (3000K/4000K/5000K), a switchable built-in photocell, and a sensor-ready receptacle for PIR or microwave sensors. Designed for easy installation, the fixture is DLC Premium listed, IP65 rated, and available in white or bronze finishes.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- wattage: 12.1W → 160W
- spec →
Transformer 150 The heart of a low-voltage outdoor lighting system is the transformer. Our rugged professional-grade multi-tap transformer sets the standard for ease of installation and adaptability to standard and app-based controls. Key Features Fully-potted, insulated, single-core transformer Easy on/off, secondary breaker switches on each common tap Two common lug terminals Amp loop to check the primary amperage on the transformer Accepts plug-in-timers, has direct photocell connection Angled terminal strip for easy wire connections, eliminates blind spots Heavy-duty stainless-steel cabinet with integrated mounting bar, lockable Removable bottom panel, 5 knockouts for wire connections Integrated short circuit and overload protection Includes 5’ grounded heavy-gauge power cord ETL tested, in conformance to ANSI/UL 1838 Electrical Specifications 150 watts with 4 taps: 12, 13, 14, 15 volts, Maximum total amps: 1.5A. Use any combination of terminal lugs but do not exceed transformer’s rated wattage on any lug.
- category
- environment
- voltage
- spec delta
- wattage: 12.1W → 600W
- spec →
The LAC Series crowned four-rung traditional acorn luminaire features a corrosion-resistant cast aluminum fitter with 11 decorative design options, combined with a high-impact clear acrylic globe with two available sizes. It utilizes a three-dimensional LED Power Array™, offering efficient IES distribution patterns (Types II, III, IV, and V). Available in neutral, cool, and warm white, with lumen maintenance of L94 at 60,000 hours, this fixture supports dimming and is UL® listed for wet locations. Optional features include mini-button photocells, motion sensors, and two lens configurations for diffused lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → UNV
- wattage: 12.1W → 2W
- spec →
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- housing
- spec delta
- voltage: 120V → UNV
120VAC swivel SPST conduit mounting with 6" wire length. Includes o-ring and lock nut. A photo cell-only configuration will turn on lighting whenever it sufficiently dark to trigger the photo cell, even during the middle of the day if there is a thunderstorm. A lighting system controlled by a photo cell will remain on until dawn, so lights will be on through the entire night.
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps HALO
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Georgia GA1 agency
- Ardd + WinterCooper (Eaton)
Atlanta · Savannah
Hawaii HI1 agency
- Sunburst DesignsCooper (Eaton)
Statewide
Idaho ID1 agency
Boise
Illinois IL2 agencies
Central
- The Lighting DigestCooper (Eaton)
Chicago
Indiana IN1 agency
- Specified Lighting Systems of IndianaCooper (Eaton)
Statewide
Iowa IA1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kansas KS1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kentucky KY1 agency
- Lighting AssociatesCooper (Eaton)
Louisville
Louisiana LA1 agency
- WKA LightingCooper (Eaton)
Baton Rouge · New Orleans · Shreveport
Maine ME1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Maryland MD1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Massachusetts MA1 agency
- Reflex Lighting GroupCooper (Eaton)
Boston · Springfield
Michigan MI2 agencies
- Clarus Lighting and ControlsCooper (Eaton)
Detroit
- Crites, Tidey & AssociatesCooper (Eaton)
Grand Rapids
Minnesota MN1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Mississippi MS1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
Missouri MO2 agencies
- Mercer-ZimmermanCooper (Eaton)
Kansas City
St. Louis
Montana MT1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Nebraska NE1 agency
- Mercer-ZimmermanCooper (Eaton)
Omaha
Nevada NV2 agencies
- CAL LightingCooper (Eaton)
Reno
- Nevada Sales AgencyCooper (Eaton)
Las Vegas
New Hampshire NH1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
New Jersey NJ2 agencies
- Enterprise Lighting SalesCooper (Eaton)
Northern NJ
- Lighting SolutionsCooper (Eaton)
Southern NJ
New Mexico NM1 agency
- Schroeder SalesCooper (Eaton)
Statewide
New York NY2 agencies
- Enterprise Lighting SalesCooper (Eaton)
NY City metro
- Quality Lighting SystemsCooper (Eaton)
Upstate
North Carolina NC2 agencies
- Q.LightingCooper (Eaton)
Greensboro · Raleigh
- Bodwell & AssociatesCooper (Eaton)
Charlotte
North Dakota ND1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Ohio OH2 agencies
- Clarus Lighting and ControlsCooper (Eaton)
Toledo
- Lighting & ControlsCooper (Eaton)
Cincinnati · Cleveland · Columbus
Oklahoma OK1 agency
- Premier Lighting SalesCooper (Eaton)
Statewide
Oregon OR1 agency
- SolusCooper (Eaton)
Statewide
Pennsylvania PA2 agencies
- Lighting SolutionsCooper (Eaton)
Philadelphia
- Architectural Lighting SalesCooper (Eaton)
Pittsburgh
Rhode Island RI1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
South Carolina SC1 agency
- Ardd + WinterCooper (Eaton)
Statewide
South Dakota SD1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Tennessee TN2 agencies
- Ardd + WinterCooper (Eaton)
Chattanooga · Knoxville · Nashville
- Perkins-Everitt Lighting & ControlsCooper (Eaton)
Memphis
Texas TX4 agencies
- Peterson Scharck & AssociatesCooper (Eaton)
Houston
- Legacy LightingCooper (Eaton)
Austin
- Texas Lighting SolutionsCooper (Eaton)
Dallas · El Paso
- 2M LightingCooper (Eaton)
San Antonio
Utah UT1 agency
- Quantum LightingCooper (Eaton)
Statewide
Vermont VT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Virginia VA1 agency
- JJM AssociatesCooper (Eaton)
Norfolk · Richmond · Roanoke
Washington WA2 agencies
- SeaTac Lighting & ControlsCooper (Eaton)
Seattle
- Ambient LightingCooper (Eaton)
Spokane
West Virginia WV1 agency
- Robert S. Kimball AssociatesCooper (Eaton)
Statewide
Wisconsin WI1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Wyoming WY1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.