HLB8LS9FSE010MWR-C
1/2"-thin canless downlights that install virtually anywhere with glare-reducing prismatic lens
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The LITELUME™ Recessed Canopy Luminaire (LL-RCL) is designed to replace HID lighting systems up to 250w MH or HPS. The low profile housing features a polycarbonate lens with low glare. Can be used to replace existing recessed canopy lights or used in new construction. Typical applications include covered entryways and soffits in retail centers, schools and universities, office buildings and medical facilities. Mounting heights of 12 to 16 feet can be used based on light level and uniformity requirements.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
RWF 2×8 watts – RWC 2×12 watts – RWH 2×18 watts
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → 120V
- cct: 5000K → 3000K
- spec →
The Solid State Steplight series from U.S. Architectural Lighting is flat-faced recessed wall or steplight luminaire suitable for step, low level, and directional lighting. It features contemporary corrosion-resistant cast aluminum housings and powder coating for durability. The 4482 model includes a louvered face with 45˚ cutoff, while the 5482 model has an open face with opal tempered glass. Both models use LED tubes with diffuse acrylic lenses and high-output LEDs available in Neutral, Cool, or Warm White. The LED drivers are UL recognized and operate between 120-277V. The fixtures are finished with a durable polyester powder coat in multiple color options. BABA compliant. UL listed for wet location.
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 5000K → 4000K
- spec →
Inter-lux - ORMA Ceiling Square Trim Optics is a compact and shallow family of outdoor LED down lights perfect for under canopies, part of the broader Orma family of in-grade and wall fixtures
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 3000K
- spec →
Dedicated new construction housing for use in insulated ceilings can be in direct contact with insulation. Powder-coated steel housing meets a 2-hour fire rating per the International Building Code section 714 for 1-hour and 2-hour fire-rated assemblies. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. The housing is labeled for use with LED downlights or as an outlet box. Input Voltage: 120/277VAC Clearance: IC Air-Tight Compatible Surface Mounts: NELO: ELO LED Surface Mounts NLOPAC: Opal LED Surface Mounts NLOS: Surf LED Surface Mounts with Regressed Baffle NSLIM: Slim LED Surface Mounts NWELO: wELO LED Surface Mounts NYLM: iLENE LED Cylinders
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 5000K → 2700K
- spec →
Gardco 101 LED trapezoidal wedge high performance sconce luminaires are designed to integrate naturally to wall surfaces. 101 LED luminaires are available with three (3) different distribution patterns, providing full cutoff performance (in the normal downlight position) and featuring LED arrays. Luminaires provide performance excellence and advanced Gardco LED thermal management technology. High performance Class 1 LED systems offer potential energy savings of 50 % or more compared to HID systems. 101 LED luminaires are also available with Automatic Profile Dimming, increasing savings by an additional 33%. Now available with motion response and emergency battery pack offering.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
IC Airtight for use with direct contact to insulation. Designed to fit in plenums as shallow as 3". Eliminates the need for housing. New Construction application requires mounting plate or frame. Remodel applications require no additional accessories. Wet Location allows for use indoors or outdoors. Energy Star Certified Title 24 JA8-2019 Compliant Includes driver and Jbox. For EM Backup use KEM-ERT
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- spec →
LED OUTDOOR WALL CYLINDER WITH SELECTABLE UP AND/OR DOWN LIGHT The CYLINDRO Series 9101 is an ADA outdoor wall cylinder that with a field adjustable control to switch between downlight or uplight/downlight. The body is constructed out of aluminum with glass lenses on the top and bottom. Available in 3000°K, 4000°K or 5000°K.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- spec →
Contemporary LED outdoor sconce. Die-cast aluminum housing. Clear seeded glass diffuser for a dramatic look. Down light illumination. Durable powder coat finish. Available in two sizes.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- spec →
HPC³™ | Column The HPC³™ is a modular system that offers flexibility with mounting options, creating endless variations that will suit any environment. Each component offers seamless construction, is fully enclosed and washable. Unlike typical cylindrical fixtures that use standard opal acrylics, HPC³™ is lit from end to end using a 6-sided internal board and heat sink system. This assures full and consistent performance throughout the entire fixture, producing an even, ethereal glow. Built from a specially synthesized material that yields 85% light transmission while offering excellent LED hiding properties, this system of fixtures can provide all of the light required in a space without using supplemental downlights. The HPC³ Column can be placed independently as either a freestanding column or an anchored column, or it can be used as the base in a system of other HPC³™ components. Build your own 3D models inSketchUp, or see our prebuilt samples for inspiration. Downloads Spec SheetBarbican HPC3 Column Spec Sheet Reference PDFCOL HPC3 Column Revit PackageBarbican HPC3 Revit Media KitBarbican Rep Presentation ↗
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 5000K → 2700K
- spec →
The 1141-GB Glass Boarder Linear In-Grade offers versatile lighting with five distributions and up to 2,100 lumens per foot. Designed for recessed applications, it features color temperatures from 2700°K to 5000°K, a flow-through design for easy installation, and a drive-over rated housing with IP68 protection. Its durable construction and through-branch circuiting capability make it ideal for various outdoor settings.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120-277V
- spec →
Recessed wall steplight series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and ring/faceplate. - Frosted, tempered, silk-screened, flat glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life. - IESNA Type III light distribution. - Input voltage: 120-277 V (50 / 60 Hz), integral driver. - Pre-wired factory sealed cable for external electrical connection included. - Stainless steel recessed rough-in kit to be ordered separately. - Consult factory for dimming options, marine-grade, custom finishes (please specify RAL color), and non-cataloged CCT (Kelvin) options including static colors. - Consult factory for custom pre-wired factory sealed cable length options. - Product meets Buy American Act requirements within ARRA. - 5-year warranty.
- category
- subcategory
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps HALO
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.