71413
Recessed wall steplight series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and ring/faceplate. - Frosted, tempered, silk-screened, flat glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - Custom MCPCB utilized to maximize heat dissipation and promote a long LED life. - IESNA Type III light distribution. - Input voltage: 120-277 V (50 / 60 Hz), integral driver. - Pre-wired factory sealed cable for external electrical connection included. - Stainless steel recessed rough-in kit to be ordered separately. - Consult factory for dimming options, marine-grade, custom finishes (please specify RAL color), and non-cataloged CCT (Kelvin) options including static colors. - Consult factory for custom pre-wired factory sealed cable length options. - Product meets Buy American Act requirements within ARRA. - 5-year warranty.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The H36LVRTAT277 is a Non-IC AIR-TITE™ fixture for use with H3 3” series trims. For installation from below the ceiling. Housing is AIR-TITE rated to prevent airflow between heated or air conditioned spaces and unconditioned attic/plenum areas. H36LVRTAT277 features integral 120/277 dualtap transformer. For use with 12V MR16 lamps. Designed for installation in 120 or 277V electrical systems. Non-IC Housing is AIR-TITE™ but insulation must be kept 3 inches away from all sides of housing.
- category
- subcategory
- environment
- voltage
- spec →
The Boca 696 is a compact in-ground LED luminaire (6.25” dia. x 9.25” deep) designed for precision uplighting, wall washing, or general illumination in tight spaces. It offers both line and low voltage options, with an integral transformer for direct 120V–277V connection. Featuring ±22° vertical tilt and 360° rotation, it’s ideal for recessed installation in concrete, stone, wood, or drive-over surfaces. Boca 696 supports up to three filters or lenses for versatile effects and includes Lumiere’s Siphon Protection System to prevent water intrusion through the wiring.
- category
- subcategory
- environment
- voltage
- spec →
The Solid State Steplight series from U.S. Architectural Lighting is flat-faced recessed wall or steplight luminaire suitable for step, low level, and directional lighting. It features contemporary corrosion-resistant cast aluminum housings and powder coating for durability. The 4482 model includes a louvered face with 45˚ cutoff, while the 5482 model has an open face with opal tempered glass. Both models use LED tubes with diffuse acrylic lenses and high-output LEDs available in Neutral, Cool, or Warm White. The LED drivers are UL recognized and operate between 120-277V. The fixtures are finished with a durable polyester powder coat in multiple color options. BABA compliant. UL listed for wet location.
- category
- subcategory
- environment
- voltage
- spec →
DESCRIPTION The MEOSS is a general illumination surgical suite downlight. ELECTRICAL SYSTEM Integrated 120/277V LED driver, 0-10v dimming standard. Integral EMI filter with option EMI and option MIL. LED system rated for >50K lifehours (L70 @ 75°C). OPTICAL SYSTEM Diffuser completely diffuses the view of the LEDs, while providing a
- category
- subcategory
- environment
- voltage
- spec →
IC rated aluminum die-cast LED module with two tension steel spring clips. Module includes a 7" quick connect wire and threaded to fit the trim and transfer heat. Iolite can-less LED modules require a compatible driver box and trim. Compatible Driver Box: NJCB-12: 12W Driver; 120V input, Phase dimming NJCB-12LE4: 12W Driver; 120-277V input, Phase or 0-10V dimming Compatible Trims: NIOC-2RNB: 2" Iolite Can-less Round Bullnose Trim NIOC-2RNDC: 2" Iolite Can-less Round Downlight Trim NIOC-2SNDSQ: 2" Iolite Can-less Square Downlight Trim NIOC-2RPH: 2" Iolite Can-less Round Pinhole Trim NIOC-4RNB: 4" Iolite Can-less Round Bullnose Trim NIOC-4RNDC: 4" Iolite Can-less Round Downlight Trim NIOC-4RPH: 4" Iolite Can-less Round Pinhole Trim NIOC-4RSLA: 4" Iolite Can-less Round Adjustable Trim NIOC-4RSP: 4" Iolite Can-less Round Sloped Trim NIOC-4RTLNDC: 4" Iolite Can-less Round Trimless Downlight NIOC-4RTLSLA: 4" Iolite Can-less Round Trimless Adjustable Slot NIOC-4SNDSQ: 4" Iolite Can-less Square Downlight Trim Color Temperatures: 2700K, 3000K, 3500K, 4000K, Comfort Dim (warm dimming) Lumens / Wattage: Up to 1200lm / 12W Optics: Three field changeable optics included Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable
- category
- subcategory
- environment
- voltage
- spec →
Frame to be used with Oak™ Architectural Downlights only (E1AK02 & E1AK12) UL Listed for direct contact with insulation Frame specified for 900 lumens (8W) Driver specified for 120V (Triac/ELV) or 120/277V (0-10V/Triac/ELV) Damp Location Listed, Wet Location with Wet Location Light Engines JA8-2022-E, UL Listed
- category
- subcategory
- environment
- voltage
- spec →
RECESSED CENTER DRUM – SURFACE OR PENDANT BUY AMERICA COMPLIANT The DECO DRUM Series of products is our cost effective drum solution. Available in several standard and infinite optional shades, the unit can be manufactured to meet any architectural need. An optional suspension system transforms any unit to a pendant, enabling flexibility in utilization. LED light engines are standard with several lumen packages, color temperatures and dimming options to choose from. Custom ability in shape and size (up to 60" D x 24" H) is available. All units are equipped standard with an Energy Star LED light engine.
- category
- subcategory
- environment
- voltage
- spec →
HPC³™ | T Weld The HPC³™ is a modular system that offers flexibility with mounting options, creating endless variations that will suit any environment. Each component offers seamless construction, is fully enclosed and washable. Unlike typical cylindrical fixtures which use standard opal acrylics, HPC³™ is lit from end to end using a 6-sided internal board and heat sink system. This assures full and consistent performance throughout the entire fixture, producing an even, ethereal glow. Built from a specially synthesized material that yields 85% light transmission while offering excellent LED hiding properties, this system of fixtures can provide all of the light required in a space without using supplemental downlights. The HPC³™ T can be hung independently as a pendant or can be used as a connector to join multiple HPC³™ pieces in a system. Build your own 3D models in SketchUp, or see our prebuilt samples for inspiration.
- category
- subcategory
- environment
- voltage
- spec →
PFX-5308 linear wall mount lighting is available in a wall mount design, with a sleek low-profile sensibility optimal for architectural lighting applications, ideal for corridors, stairwells, and more. These timeless, streamlined forms blend well with contemporary decors and modern workplaces. It is available in 2ft, 4ft and 8ft, simply provide wide, powerful lighting to any atmosphere with continuous runs. It can provide smooth uplight and downlight, allowing for wider spacing between fixtures and better ceiling light uniformity.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → 277V
The Boca Lighting and Controls InGrade is a rugged aluminum structure designed to protect various Boca Flasher products in underground applications.
- category
- subcategory
- environment
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Performance iN Lighting
Full directory →38 rep agencies carry the Performance in Lighting line across 50 states. Pick your state.
Alabama AL1 agency
- AMA LightingAcuity Brands
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Allied Group SalesSignify (Philips)
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco
Los Angeles · San Diego
Colorado CO1 agency
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- One Source AssociatesCurrent
Statewide
Florida FL4 agencies
- AMA LightingAcuity Brands
Panhandle
- Florida Lighting AssociatesCurrent
Fort Myers · Tampa
- SESCO LightingSignify (Philips)
Jacksonville · Orlando
Miami
+40 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.