EXIT-WET-CP
Enclosed in injection-molded, flame retardant, UV stabilized ABS plastic housing, Williams wet location listed EXIT/WET provides 90 minutes of emergency operation.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.
- category
- environment
- voltage
- spec →
The LPXW series provides a UL924 compliant solution for outdoor exit requirements. The fixture is wet location listed with a temperature rating of (- 20°C to 50°C ). The UV stabilized polycarbonate housing is available in white, grey or black with red or green Exit letters. Labor savings self-diagnostics that perform required monthly and yearly testing are standard for the self-powered exits.
- category
- environment
- voltage
- lens
- spec delta
- voltage: UNV → 120V/277V
- spec →
Rugged 20 gauge steel luminaires comply with the latest New York City codes and performance standards. Stencil letters are 8" high with 1" stroke, with a minimum of 100' viewing distance rating as required by UL 924 standard. FEATURES Meets City of New York Emergency Code requirements 20-gauge steel housing with white powder coating Fully-illuminated 8" letters with 1" stroke Includes single and double faces Removable knockout chevron directional arrows Illuminates for 90 minutes during power failure Universal mounting (Wall or Side) HOUSING 20-gauge steel housing includes an additional face for a double-sided exit sign. Adjustable emergency heads feature a unique twist-locking collar. Low profile snap-together. Snap-out knockouts for wiring. MOUNTING Steel case includes two knockouts for side of wall mounting (hardware included). LABELS AND LISTINGS 5 year limited warranty Meets City of New York emergency code requirements (NY Approved) NFPA-101 cULus Listed for damp locations
- category
- environment
- voltage
- spec →
The DLTLC from Holophane is a wet location low-profile combination of exit and emergency light. Available with red or green letters. It is ideal to safely illuminate the path of egress above-the-door
- category
- environment
- voltage
- spec →
LED EMERGENCY DECORATIVE Black or white finish. 1 watt per head. Options include self-diagnostics.
- category
- environment
- voltage
- spec →
This TCL Series EXIT HERE w/Down Arrows (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps H.E. Williams
Full directory →30 rep agencies carry the Williams line across 49 states. Pick your state.
Alabama AL1 agency
- SESCO LightingSignify (Philips)
Birmingham · Mobile
Alaska AK1 agency
- Arctic Sales AgencyCurrent
Statewide
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
Los Angeles · Ventura
Colorado CO1 agency
Statewide
Connecticut CT1 agency
- Apex Lighting SolutionsSignify (Philips)
Statewide
Delaware DE1 agency
- DiversifiedCurrent
Statewide
District of Columbia DC1 agency
- Commercial Lighting SalesCurrent
Statewide
Florida FL1 agency
- SESCO LightingSignify (Philips)
Fort Myers · Jacksonville · Miami · Orlando · Panhandle · Tampa
+39 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.