OptiForm Flood Large OFD-L
Gardco OptiForm Flood is a low-profile, lightweight luminaire designed for parking lots and other area lighting applications, delivering aesthetics, flexibility, and savings for campuses, retail and hospitality, and public spaces. With a variety of adjustable mountings and advanced optics, it provides efficient, uniform illumination over a tilt range of 0-80° above nadir. Engineered with integral controls options and Service Tag, OptiForm reduces energy and maintenance costs. Whether you need to highlight key areas or cover expansive zones, choose OptiForm for optimal performance.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
PFX-3156 Gooseneck Light is a unique decorative lighting fixture that allows you to update the look of your building. Elegant and curved goose neck arm, simple and low-key appearance design, can be well applied to a variety of architectural styles. Quick and easy Installation. The 28W Fixtures offers Selectable CCTs, can be adjusted to be 2700K/3000K/ 4000K/5000K/6500K. Universal Voltage 120-277VAC. Integrated Photocell included.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 80000 → 3080
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 80000 → 3000
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: UNV → 120V/277V
- lumens: 80000 → 850
- spec →
With the advancement in our industry-leading AccuLED Optics™ system, the next generation Navion LED area, site and roadway luminaire offers an expanded selection of optical distributions to provide the configurability and superior performance required for outdoor applications. The Navion luminaire provides uniform, glare-free, energy-efficient light for commercial, industrial and municipal parking lots as well as roadway applications. UL/cUL listed for wet locations, IP66 enclosure rating available.
- category
- environment
- voltage
- CCT
- dimming
- spec →
Lanterra 1003 Sign is a small 2.5” line voltage sign lighting luminaire that attaches to a wall mounted straight arm and is available in aimable single and dual head configurations along with 90 degree elbow options to meet any desired rotation and vertical adjustment required for a project. Multiple standard stem length arms up to 36” are available. The luminaire also comes with various mounting, beam optics. Various lenses, louvers and color or dichroic filters which can combine up to two at once to create multiple lighting effects. The fixture may be used indoors or outdoors and carries IP66 rating.
- category
- environment
- voltage
- CCT
- dimming
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- lumens: 80000 → 9000
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 80000 → 5000
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- lumens: 80000 → 10904
- spec →
Juno® IC20LED 600LM, dedicated 5-inch LED new construction housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 80000 → 600
- spec →
The LAC Series crowned four-rung traditional acorn luminaire features a corrosion-resistant cast aluminum fitter with 11 decorative design options, combined with a high-impact clear acrylic globe with two available sizes. It utilizes a three-dimensional LED Power Array™, offering efficient IES distribution patterns (Types II, III, IV, and V). Available in neutral, cool, and warm white, with lumen maintenance of L94 at 60,000 hours, this fixture supports dimming and is UL® listed for wet locations. Optional features include mini-button photocells, motion sensors, and two lens configurations for diffused lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 80000 → 1079-18143
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 80000 → 463-882
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Genlyte Solutions
Full directory →26 rep agencies carry the Genlyte Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- SESCO LightingSignify (Philips)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Allied Group SalesSignify (Philips)
Statewide
Arkansas AR1 agency
- SESCO LightingSignify (Philips)
Statewide
California CA2 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- LINX Lighting + ControlsSignify (Philips)
Los Angeles · San Diego · Ventura
Colorado CO1 agency
- CT Lighting & ControlsSignify (Philips)
Statewide
Connecticut CT1 agency
- Apex Lighting SolutionsSignify (Philips)
Statewide
Delaware DE1 agency
- ELA + SynergySignify (Philips)
Statewide
District of Columbia DC1 agency
- Lighting EnvironmentsSignify (Philips)
Statewide
Florida FL1 agency
- SESCO LightingSignify (Philips)
Fort Myers · Jacksonville · Miami · Orlando · Panhandle · Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.