TXP
Industrial emergency light for Class 1 Division 2, Groups A-D hazardous applications.
Cross-References
Top equivalents — 12 across 10 brands
Compare top 3 →Highest-output ELM Quantum dual-head emergency unit at 1100 lumens. For large open areas requiring maximum coverage.
- category
- voltage
- duration
- spec delta
- voltage: 120/277 VAC → 120-277V MVOLT
- spec →
The Input/Output Device (OCC-RJ45) provides connection of any Greengate low voltage occupancy sensor, or other low voltage maintain closure, to the Room Controller or DLVP power module to define the occupancy state of the space. The OCC-RJ45 also can be used as an output to the HVAC system, third party systems or Switchpacks based upon room occupancy status.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 120V
- spec →
For applications where the finest architectural appearance is required, the Concealed Emergency Light (CEL) Series offers the maximum protection of high-quality MR16 lamps to light your path when you need it, but also the minimal intrusion on your environment when you don't. The CEL is fully recessed in your wall or ceiling and is almost invisible when not in use, demonstrating the perfect balance of form and function. The doors open automatically when power is lost, lighting your path of egress with up to 150 feet, and then automatically return to the closed position when power is restored.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → UNV
- spec →
UltraLITE Model ELU (1.5kW to 14kW)
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 120347
- spec →
Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 120-277VAC Output Voltage: 120VAC (during emergency operation) Output Wattage: 23W Compatible Luminaires: NCSC: 4" & 6" Contractor Series Can-less Downlights NCSD: 6" Contractor Series Disk Lights NCSR: 4" & 6" Contractor Series Retrofits NEFLINTW: 4" & 6" FLIN Can-less Regressed Baffle Downlights NELOSW: 4", 6" & 8" ELO Surface Mounts with Selectable Lumens & CCT NFLAT: 4" & 6" FLAT Can-less Non-Metallic Downlights NFLINA: 4" & 6" FLIN Can-less Adjustable Downlights NFRC: 4" & 6″ Fire Rated Can-less Downlights NJCB-12: 2" & 4" Iolite Can-less Driver Box NLCBC2: 4", 5" & 6" Cobalt Click Retrofits with Selectable CCT NLRS: 6" Sloped Retrofits NLOPAC-R6REGT24TW: 6" Regressed Opal Surface Mount NLOPAC2-R6509T24: 6" Opal 2 Surface Mount NLOS: 4", 6" & 7" SURF Surface Mounts NLTH: 4", 6" & 8" Theia Can-less Downlights NM1-PRDC: 1" M1+ Can-less Downlight NM2: 2" M2 Can-less Downlights NM4: 4" M4 Can-less Downlights NMC: 4" & 6" M-Curve Can-less Adjustable Downlights NMW: 2" & 4" M-Wave Can-less Adjustable Downlights NOXAC-431TW: 4" Onyx Retrofit Reflector with Selectable CCT NOXAC-432TW: 4" Onyx Retrofit Baffle with Selectable CCT NOXAC-4RGTW: 4" Onyx Adjustable Retrofit with Selectable CCT NOXAC-4RWTW: 4" Onyx Round Wall Wash Retrofit with Selectable CCT NOXAC-4SWTW: 4" Onyx Square Wall Wash Retrofit with Selectable CCT NOXAC-5631TW: 5"/6" Onyx Retrofit Reflector with Selectable CCT NOXAC-5632TW: 5"/6" Onyx Retrofit Baffle with S
- category
- voltage
- spec delta
- wattage: 140W → 9W
Mini Emergency Light with two 2W fully adjustable glare-free square shape light heads for emergency light. Injection-molded thermoplastic ABS housing Innovative snap-together design allows for fast and easy installation. 250 lm (total) 3.6V, 1.5Ah battery pack for 90 minutes of emergency operation. LED Driver: 120V/277V AC, dual voltage operation integrated with LED bulb. cUL listed for damp location.
- category
- voltage
- spec delta
- wattage: 140W → 2W
- spec →
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
- category
- voltage
- spec delta
- wattage: 140W → 1W
The EB30 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB30 immediately switches to the emergency mode, keeping one or two lamps illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → UNV
Contractor Select EU2C dual LED lamp head emergency light - most popular and readily available EU2C configuration.
- category
- voltage
- duration
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Evenlite
Full directory →52 rep agencies carry the Evenlite line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting PartnershipCurrent
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
- PLP SoCalCurrent
Los Angeles · Ventura
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- illuminateCurrent
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Jacksonville
- Karl Volk & Co.
Panhandle
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.