P2E100-B-L66
Phoenix in 6V 100W configuration, black housing, with 88W remote capacity.
Cross-References
28 equivalents across 13 brands
Compare top 3 →Premium Lensed Strip Light · Luminaires Series HAW
- category
- mounting
- spec delta
Highest-output ELM Quantum dual-head emergency unit at 1100 lumens. For large open areas requiring maximum coverage.
- category
- voltage
- duration
- spec delta
- voltage: 120/277 VAC → 120-277V MVOLT
- spec →
AtLite UL924 and NYC code compliant LED emergency light available with two or three 80 lumen heads
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 120V
- spec →
The Ridgeview™ LED area/site luminaire is the compact, efficient, economical approach to LED area lighting. A pure blend of traditional form and LED efficiency, Ridgeview provides functional, low profile design with excellent operating performance. Patent pending modular LightBAR™ technology delivers uniform and energy-conscious illumination to parking lots and perimeter security lighting applications. U.L. and CUL listed, LM79/LM80 compliant, IP66 rated LightBARS™, IP65 rated fixture and 3G vibration rated.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 277V/347V/480V
- spec →
The Sure-Lites fluorescent EBP will power fluorescent fixture to satisfy emergency path of egress code requirements during a power interruption. When AC power fails, the Sure-Lites EBP automatically switches to emergency mode - providing illumination for at least 90 minutes. The maintenance free and long life nickel cadmium battery generates up to 500 lumens or 1400 lumens in emergency mode depending on model. The EBP series is UL924 listed for field retrofit installation and is compatible with most linear fluorescent lamps and carries a 5 year limited warranty.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 277V
Ease of Installation and Maintenance
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 277V
- spec →
Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 120-277VAC Output Voltage: 120VAC (during emergency operation) Output Wattage: 23W Compatible Luminaires: NCSC: 4" & 6" Contractor Series Can-less Downlights NCSD: 6" Contractor Series Disk Lights NCSR: 4" & 6" Contractor Series Retrofits NEFLINTW: 4" & 6" FLIN Can-less Regressed Baffle Downlights NELOSW: 4", 6" & 8" ELO Surface Mounts with Selectable Lumens & CCT NFLAT: 4" & 6" FLAT Can-less Non-Metallic Downlights NFLINA: 4" & 6" FLIN Can-less Adjustable Downlights NFRC: 4" & 6″ Fire Rated Can-less Downlights NJCB-12: 2" & 4" Iolite Can-less Driver Box NLCBC2: 4", 5" & 6" Cobalt Click Retrofits with Selectable CCT NLRS: 6" Sloped Retrofits NLOPAC-R6REGT24TW: 6" Regressed Opal Surface Mount NLOPAC2-R6509T24: 6" Opal 2 Surface Mount NLOS: 4", 6" & 7" SURF Surface Mounts NLTH: 4", 6" & 8" Theia Can-less Downlights NM1-PRDC: 1" M1+ Can-less Downlight NM2: 2" M2 Can-less Downlights NM4: 4" M4 Can-less Downlights NMC: 4" & 6" M-Curve Can-less Adjustable Downlights NMW: 2" & 4" M-Wave Can-less Adjustable Downlights NOXAC-431TW: 4" Onyx Retrofit Reflector with Selectable CCT NOXAC-432TW: 4" Onyx Retrofit Baffle with Selectable CCT NOXAC-4RGTW: 4" Onyx Adjustable Retrofit with Selectable CCT NOXAC-4RWTW: 4" Onyx Round Wall Wash Retrofit with Selectable CCT NOXAC-4SWTW: 4" Onyx Square Wall Wash Retrofit with Selectable CCT NOXAC-5631TW: 5"/6" Onyx Retrofit Reflector with Selectable CCT NOXAC-5632TW: 5"/6" Onyx Retrofit Baffle with S
- category
- voltage
- spec delta
- wattage: 88-100W → 9W
Mini Emergency Light with two 2W fully adjustable glare-free square shape light heads for emergency light. Injection-molded thermoplastic ABS housing Innovative snap-together design allows for fast and easy installation. 250 lm (total) 3.6V, 1.5Ah battery pack for 90 minutes of emergency operation. LED Driver: 120V/277V AC, dual voltage operation integrated with LED bulb. cUL listed for damp location.
- category
- voltage
- spec delta
- wattage: 88-100W → 2W
- spec →
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
- category
- voltage
- spec delta
- wattage: 88-100W → 1W
- spec →
The EB7 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB7 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → UNV
LED Strip Light — Lumen & Kelvin Selectable. Emergency lighting with adjustable Sage Relay (Sage Relay), powered from a low-voltage central battery system.
- category
- mounting
Contractor Select EU2C dual LED lamp head emergency light - most popular and readily available EU2C configuration.
- category
- voltage
- duration
- spec →
EPIC Collection delivers custom luminaire flexibility with the quality and availability expectations of standard specification grade products. Offered in two housing sizes, and hundreds of unique combinations, EPIC Collection can be dressed to suit any application. Recognizing evolving environmental and legislative trends, EPIC Collection delivers world class optical solutions to the decorative luminaire marketplace. EPIC Collection offers targeted solutions for full cutoff compliance, spill light control, and path of egress illumination while integrating the latest LED technologies into visually comfortable lighting solutions.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → UNV
- spec →
The APEL is an UL 924 listed emergency light with a minimum of 90 minutes of run time and 17 feet of emergency egress coverage. Key features include LED heads, a no maintenance nickel cadmium battery and a five year fixture warranty. The LED heads are fully adjustable to maximize design flexibility while the compact form factor optimizes aesthetics. The universal j-box mounting pattern and snap fit housing construction significantly reduce installation time. The APELH2 versions have remote capacity capable of powering two additional APWR LED heads.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → 277V
- spec →
This low profile fixture offers the lowest profile of all Nora Emergency fixtures. The light sources are held within the body of the fixture, with both beveled side panels constructed of clear polycarbonate. These features make the emergency light small enough for virtually any application, and eliminate the necessity of aiming and locking lamp heads. BODY 11-7/8" Width X 5-1/8" Height X 2-3/4" Depth Injection-molded housing with access for ceiling or wall power supply. FACE Injection molded face with two clear polycarbonate covers on beveled surfaces. MOUNTING Wall or ceiling Mounting hardware included Electrical 120/277V input Automatic solid state switching and charging Automatic reset Battery Replaceable 3.6V, 1000mAh NiCad battery for backup operation during power loss 90 minute emergency operation on fully charged battery Testing High-charge/ready operation indicator light Test button Circuitry Protection Short circuit protection Listings UL 924 NFPA 70 & NFPA 101 Suitable for damp location
- category
- voltage
- spec delta
- wattage: 88-100W → 2W
Emergency Light with two Adjustable 1.5W LED glare free light heads. 120/277V. Universal mounting plate for fast and easy installation. Sturdy thermoplastic housing. Automatic switching from AC supply to battery power. Long life NiCad battery. cUL Listed for damp location.
- category
- voltage
- spec delta
- wattage: 88-100W → 5W
- spec →
The EB30 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB30 immediately switches to the emergency mode, keeping one or two lamps illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- voltage
- wattage
- spec delta
- voltage: 120/277 VAC → UNV
Standard white ELM2L configuration for Contractor Select program.
- category
- voltage
- duration
- spec →
Mini profile LED emergency light with remote capability and self diagnostics. Luminaire provides 90 minutas of light from two adjustable heads for illuminating paths of egress upon failure of normal power. FEATURES Plastic enclosure with 5VA flame retardant Snap-together design for easy installation Two fully adjustable glare-free square shape heads Test switch and charge rate indicator Maintenance-free, rechargeable Ni-Cad batteries Extra 3.6V battery for 3W remote capabilities Self-diagnostic and self-testing unit Ceiling or wall mounted Universal 120-277V input CONSTRUCTION Injection-molded thermoplastic ABS housing. Plastic enclosure with 5VA flame retardant. Snap-together design for easy installation. Two fully adjustable glare-free square heads for emergency lighting LABELS AND LISTINGS cULus Listed for Damp locations NFPA
- category
- voltage
- housing
- spec delta
- wattage: 88-100W → 3W
Single whip for J-Box mounting. 90 minutes of emergency light. 120/277V AC, 60Hz. Bottom lead
- category
- voltage
- spec delta
- wattage: 88-100W → 8W
- spec →
The DLG Canopy light was designed as a high performance canopy light for parking garages. The removable upper reflector allows for uplight when elimnated. It is segmented to allow the installer to direct the light specifically to the points of egress and away from a driver’s direct line of sight.
- category
- voltage
- lens
- spec delta
- wattage: 88-100W → 175W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Evenlite
Full directory →52 rep agencies carry the Evenlite line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting PartnershipCurrent
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- ALRSignify (Philips)
Fresno · Sacramento · San Francisco
- OCS Lighting & ControlCurrent
San Diego
- PLP SoCalCurrent
Los Angeles · Ventura
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- illuminateCurrent
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Jacksonville
- Karl Volk & Co.
Panhandle
Georgia GA2 agencies
Atlanta
Savannah
Hawaii HI1 agency
- PELSACurrent
Statewide
Idaho ID1 agency
Boise
Illinois IL1 agency
Chicago
Indiana IN1 agency
- Specified Lighting Systems of IndianaCooper (Eaton)
Statewide
Iowa IA1 agency
- ConvergenceCurrent
Statewide
Kansas KS1 agency
- ConvergenceCurrent
Statewide
Kentucky KY1 agency
- SESCO LightingSignify (Philips)
Louisville
Louisiana LA1 agency
- Lighting & Electrical Assoc.Acuity Brands
Baton Rouge · New Orleans · Shreveport
Maine ME1 agency
Statewide
Maryland MD1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Massachusetts MA1 agency
- Omnilite | illuminateCurrent
Boston · Springfield
Michigan MI2 agencies
- Gasser Bush Assoc.Acuity Brands
Detroit
- West Michigan LightingAcuity Brands
Grand Rapids
Minnesota MN1 agency
- Davis & AssociatesAcuity Brands
Statewide
Mississippi MS1 agency
- Curtis Stout, Inc.Current
Statewide
Missouri MO2 agencies
- ConvergenceCurrent
Kansas City
- St. Louis Lighting GroupAcuity Brands
St. Louis
Montana MT1 agency
- The Lighting AgencyAcuity Brands
Statewide
Nebraska NE1 agency
- CSLAAcuity Brands
Omaha
Nevada NV2 agencies
- ALRSignify (Philips)
Reno
- Nevada LightingAcuity Brands
Las Vegas
New Hampshire NH1 agency
Statewide
New Jersey NJ2 agencies
Northern NJ
Southern NJ
New Mexico NM1 agency
- RKL Sales CorporationAcuity Brands
Statewide
New York NY2 agencies
NY City metro
- Quality Lighting SystemsCooper (Eaton)
Upstate
North Carolina NC1 agency
Charlotte · Greensboro · Raleigh
North Dakota ND1 agency
- Davis & AssociatesAcuity Brands
Statewide
Ohio OH4 agencies
- Gasser Bush Assoc.Acuity Brands
Toledo
- DLS GroupAcuity Brands
Columbus
- Lighting & ControlsCooper (Eaton)
Cleveland
- Lighting DynamicsCurrent
Cincinnati
Oklahoma OK1 agency
- SESCO LightingSignify (Philips)
Statewide
Oregon OR1 agency
- ALRSignify (Philips)
Statewide
Pennsylvania PA2 agencies
- REPCO IICurrent
Pittsburgh
Philadelphia
Rhode Island RI1 agency
- Omnilite | illuminateCurrent
Statewide
South Carolina SC1 agency
- Ardd + WinterCooper (Eaton)
Statewide
South Dakota SD1 agency
- Davis & AssociatesAcuity Brands
Statewide
Tennessee TN2 agencies
- Perkins-Everitt Lighting & ControlsCooper (Eaton)
Memphis
Chattanooga · Knoxville · Nashville
Texas TX4 agencies
- Peterson Scharck & AssociatesCooper (Eaton)
Houston
- Legacy LightingCooper (Eaton)
Austin
- Texas Lighting SolutionsCooper (Eaton)
Dallas · El Paso
- 2M LightingCooper (Eaton)
San Antonio
Utah UT1 agency
- Quantum LightingCooper (Eaton)
Statewide
Vermont VT1 agency
Statewide
Virginia VA2 agencies
- Resource Lighting & ControlsAcuity Brands
Norfolk
Richmond · Roanoke
Washington WA2 agencies
- ERW Lighting + ControlsSignify (Philips)
Seattle
- Blankenship & Assoc.Signify (Philips)
Spokane
West Virginia WV1 agency
- REPCO IICurrent
Statewide
Wisconsin WI1 agency
- JTH Lighting AllianceCurrent
Statewide
Wyoming WY1 agency
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.