HeyeBeamPowered by Heye Lab
EvenliteEmergency Units

EVO-16-WH-0-BM

Evolve configured with zero lampheads to power remote heads only — 16W remote capacity.

subcategory: industrial_diecast_remote_capablefamily: Evolvevoltage: 120/277 VACwattage: 16W remote capacitybattery: LiFePO4duration minutes: 90ip rating: IP65lens material: acrylic↗housing material: die-cast aluminum↗
Spec sheet →

Cross-References

22 equivalents across 9 brands

Compare top 3 →
  • Sage EmATLpartialSUGGESTED

    Canopy Luminaire · Sensor Ready · Series ATL

    • category
    • spec delta
  • LithoniaELM6Lpartial

    Highest-output ELM Quantum dual-head emergency unit at 1100 lumens. For large open areas requiring maximum coverage.

    • category
    • voltage
    • duration
    • spec delta
    • voltage: 120/277 VAC → 120-277V MVOLT
  • Sure-LitesEBPLEDL Emergency Battery Packspartial

    The Sure-Lites LED Emergency Battery Pack EBPLEDL series allows LED luminaires to be used for emergency lighting when power fails. When a power failure occurs, the EBPELDL switches the luminaire to emergency mode and provides 90 minutes of power for emergency egress lighting. The series are UL924 listed for field retrofit installation and are compatible with Cooper Lighting Solutions LED fixtures. The constant power feature ensures consistent light output for a minimum of 90 minutes.

    • category
    • voltage
    • wattage
    spec →
  • IsoliteE3MINIweak

    The E3MINI Pure Sine Wave Mini Inverter provides a field-selectable 120 or 277 VAC input/output. It is UL 924 and CSA 22.2 approved.

    • category
    • voltage
    • spec delta
    • wattage: 16W → 250W
    spec →
  • Nora LightingNSEM6WDweak

    A surface mount enclosure with an emergency LED driver for use with 6" ELO and ELO+ luminaires. It adds 1-1/2" height to the luminaire and matches the finish. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Compatible with 6" ELO & ELO+ Matching decorative enclosure also available Listed for field installation - UL 924 and CSA C2.22 No 141 Includes integral test switch ELECTRICAL Input Voltage: 120VAC, 50/60Hz Output Voltage: 123/131VDC Wattage: 3W Illumination Time: 90 minutes OPERATION When AC power fails, the driver immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. BATTERY Ternary lithium-ion battery requires 24 hours to recharge. COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING DECORATIVE ENCLOSURE NSEM-6ND: Decorative Enclosure without Emergency Driver

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → 120V
    spec →
  • ELCO LightingEE80Lweak

    Mini Emergency Light with two 2W fully adjustable glare-free square shape light heads for emergency light. Injection-molded thermoplastic ABS housing Innovative snap-together design allows for fast and easy installation. 250 lm (total) 3.6V, 1.5Ah battery pack for 90 minutes of emergency operation. LED Driver: 120V/277V AC, dual voltage operation integrated with LED bulb. cUL listed for damp location.

    • category
    • voltage
    • spec delta
    • wattage: 16W → 2W
  • AFXEdge 8'' Round Battery Backupweak

    This 8 watt nickel-cadmium (NiCd) battery backup system is designed for use with the Edge Round 8'' flush mount (sold separately). It provides 90 minutes of power to the Edge Round 8'' flush mount to allow lighting for emergency egress or continuation of key operations during a loss of power.

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → 120V
    spec →
  • Intelligent Lighting ControlsLLxx-EM UL924 Relay Panelweak

    The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.

    • category
    • voltage
    • spec delta
    • wattage: 16W → 1W
    spec →
  • TechlightEb7 T5weak

    The EB7T5 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB7T5 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → UNV
    spec →
  • Sage EmBASpartialSUGGESTED

    Forward Lighting Wall Pack, Sensor Ready, with adjustable Sage Relay powered from a low-voltage central battery system. Prismatic Glass lens; field-selectable 3000K/4000K/5000K CCT; premium powder-coat die cast aluminum Bronze housing; universal 120-277VAC input; 0-10V DC dimming standard; integrated photocell standard; sensor ready (occupancy sensor and remote sold separately).

    • category
    • environment
    • spec delta
  • LithoniaEU2C M6partial

    Contractor Select EU2C dual LED lamp head emergency light - most popular and readily available EU2C configuration.

    • category
    • voltage
    • duration
  • Sure-LitesSEL25 / SEL50 / SEL60weak

    The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a power outage. Key features of the series include: a nickel cadmium battery capable of providing up to 16 watts of remote capacity, polycarbonate housing and heads, long life and maintenance free LED source with proprietary accuLED optics, as well as self-diagnostics that perform NFPA required monthly testing. The remote capable versions are fully compatible with SRP/SRM/SRPA LED remotes. The patented external battery disconnect and easy hang features reduce installation time and cost. The SEL series is designed for indoor commercial or industrial use.

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → 277V
    spec →
  • IsoliteLMIGN2weak

    The LMIGN LED Compact Fully Recessed Emergency Light has a compact, universal backbox that can be installed into a wall or ceiling. The unit has a small, rotating door.

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → UNV
    spec →
  • Nora LightingNEPK23LEDUNVweak

    Emergency LED driver for use with new or existing LED luminaires. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 120-277VAC Output Voltage: 120VAC (during emergency operation) Output Wattage: 23W Compatible Luminaires: NCSC: 4" & 6" Contractor Series Can-less Downlights NCSD: 6" Contractor Series Disk Lights NCSR: 4" & 6" Contractor Series Retrofits NEFLINTW: 4" & 6" FLIN Can-less Regressed Baffle Downlights NELOSW: 4", 6" & 8" ELO Surface Mounts with Selectable Lumens & CCT NFLAT: 4" & 6" FLAT Can-less Non-Metallic Downlights NFLINA: 4" & 6" FLIN Can-less Adjustable Downlights NFRC: 4" & 6″ Fire Rated Can-less Downlights NJCB-12: 2" & 4" Iolite Can-less Driver Box NLCBC2: 4", 5" & 6" Cobalt Click Retrofits with Selectable CCT NLRS: 6" Sloped Retrofits NLOPAC-R6REGT24TW: 6" Regressed Opal Surface Mount NLOPAC2-R6509T24: 6" Opal 2 Surface Mount NLOS: 4", 6" & 7" SURF Surface Mounts NLTH: 4", 6" & 8" Theia Can-less Downlights NM1-PRDC: 1" M1+ Can-less Downlight NM2: 2" M2 Can-less Downlights NM4: 4" M4 Can-less Downlights NMC: 4" & 6" M-Curve Can-less Adjustable Downlights NMW: 2" & 4" M-Wave Can-less Adjustable Downlights NOXAC-431TW: 4" Onyx Retrofit Reflector with Selectable CCT NOXAC-432TW: 4" Onyx Retrofit Baffle with Selectable CCT NOXAC-4RGTW: 4" Onyx Adjustable Retrofit with Selectable CCT NOXAC-4RWTW: 4" Onyx Round Wall Wash Retrofit with Selectable CCT NOXAC-4SWTW: 4" Onyx Square Wall Wash Retrofit with Selectable CCT NOXAC-5631TW: 5"/6" Onyx Retrofit Reflector with Selectable CCT NOXAC-5632TW: 5"/6" Onyx Retrofit Baffle with S

    • category
    • voltage
    • spec delta
    • wattage: 16W → 9W
    spec →
  • ELCO LightingEE22Lweak

    Emergency Light with two Adjustable 1.5W LED glare free light heads. 120/277V. Universal mounting plate for fast and easy installation. Sturdy thermoplastic housing. Automatic switching from AC supply to battery power. Long life NiCad battery. cUL Listed for damp location.

    • category
    • voltage
    • spec delta
    • wattage: 16W → 5W
  • TechlightEb7weak

    The EB7 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB7 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → UNV
    spec →
  • Sage EmCYPpartialSUGGESTED

    Full Body Linear High Bay — Sensor Ready · Lumen & Kelvin Selectable · 12,000–60,000 nominal lumens · 4000K/5000K field selectable · emergency-ready via factory-installed Sage Relay on a low-voltage DC central battery system

    • category
    • spec delta
  • LithoniaELM2L W M6partial

    Standard white ELM2L configuration for Contractor Select program.

    • category
    • voltage
    • duration
  • Sure-LitesSEL60R10SDweak

    Sure-Lites LED Emergency Light

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → 277V
    spec →
  • Nora LightingNE806LEDweak

    This low profile fixture offers the lowest profile of all Nora Emergency fixtures. The light sources are held within the body of the fixture, with both beveled side panels constructed of clear polycarbonate. These features make the emergency light small enough for virtually any application, and eliminate the necessity of aiming and locking lamp heads. BODY 11-7/8" Width X 5-1/8" Height X 2-3/4" Depth Injection-molded housing with access for ceiling or wall power supply. FACE Injection molded face with two clear polycarbonate covers on beveled surfaces. MOUNTING Wall or ceiling Mounting hardware included Electrical 120/277V input Automatic solid state switching and charging Automatic reset Battery Replaceable 3.6V, 1000mAh NiCad battery for backup operation during power loss 90 minute emergency operation on fully charged battery Testing High-charge/ready operation indicator light Test button Circuitry Protection Short circuit protection Listings UL 924 NFPA 70 & NFPA 101 Suitable for damp location

    • category
    • voltage
    • spec delta
    • wattage: 16W → 2W
    spec →
  • ELCO LightingKEM-LDweak

    Single whip for J-Box mounting. 90 minutes of emergency light. 120/277V AC, 60Hz. Bottom lead

    • category
    • voltage
    • spec delta
    • wattage: 16W → 8W
  • TechlightEb5weak

    The EB5 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB5 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.

    • category
    • voltage
    • wattage
    • spec delta
    • voltage: 120/277 VAC → UNV
    spec →

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →

Local Reps

Who reps Evenlite

Full directory →

52 rep agencies carry the Evenlite line across 51 states. Pick your state.

Line cards are directional — confirm coverage with the agency before routing a spec.