EPC-2 Series
Emergency power control for generator and mini inverters. Supplies power to switched lighting fixtures.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
EarthTronics LED emergency drivers regulate the power supplied to the LED fixture so that it can operate as a light source in the event of a power failure. The purpose of emergency lighting is to insure that lighting is provided promptly, automatically and for a suitable time when the normal power supply fails. This insures that people within the building can evacuate safely in the event of an emergency. All EarthTronics emergency drivers meet specific UL, CSA and NFPA requirements. Always consult local code requirements when specifying emergency lighting products.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 120V/277V → 120-347V
- spec →
Green LED Retrofit Kit The GLE-GL-RKU is a purpose-built LED retrofit kit designed to allow existing general purpose lighting to be retrofitted for safely lighting the dark cycle when growing short-day plants. Growlite's plant-safe Soft Green LEDs cannot be easily "seen" by plants allowing for critical tasks to be performed in the grow rooms during the dark cycle without the light adversely affecting the growth stage of the plant. The GLE-GL-RKU is an easy retrofit kit designed to allow existing lighting fixtures to be retrofitted for safely lighting the dark cycle.
- category
- environment
- voltage
- dimming
Halco # 95008 Evade Emergency Unit EV-EME-R quality egress lighting solution for hallway, stairwell, and other Life Safety applications UL924 Code Life Safety
- category
- environment
- voltage
- spec →
Ideal for spaces that require a highly efficient LED emergency lighting unit with 2 or 3 lighting heads and a steel enclosure. Each lamp head provides 150 lumens.
- category
- environment
- voltage
- spec →
LBUS-R Recessed Power Distribution with Built-In Emergency Fixture Compatible with all Recessed BusRun, the LBUS EM Fixture recesses fully within the BusRun for a clean approach to emergency lighting. Available in high and low outputs, the in-line BusRun emergency fixture can be used in ceilings from 10' - 24' above the finished floor, and can be used for maintenance or other lighting needs.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 120V/277V → 120V
- spec →
The NLCEMUL924 is an emergency lighting controller that meets UL924 requirements for networked controlled emergency lighting. It detects when normal building power has been interrupted and sends a wireless signal to the wirelessly controlled luminaires on the emergency circuit to override control inputs during this state. The NLCEMUL924 is designed for building emergency back-up power such as UPS or generator emergency power. It works seamlessly with NLC Bluetooth wireless lighting controllers (NLCPC1, NLCPC2) and NLC Bluetooth compatible LED drivers. Setup and commissioning requires the NICOR NLC mobile app (iOS and Android).
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →