11501
EarthTronics LED emergency drivers regulate the power supplied to the LED fixture so that it can operate as a light source in the event of a power failure. The purpose of emergency lighting is to insure that lighting is provided promptly, automatically and for a suitable time when the normal power supply fails. This insures that people within the building can evacuate safely in the event of an emergency. All EarthTronics emergency drivers meet specific UL, CSA and NFPA requirements. Always consult local code requirements when specifying emergency lighting products.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The EXTLRE Series from the Lithonia Lighting® Indura® Family is an emergency remote perfectly suited for industrial, manufacturing and municipal applications. The EXTLRE is specifically designed for
- category
- environment
- voltage
- spec delta
- wattage: 100W → 32W
- spec →
Emergency LED driver kit for use with new or existing LED luminaires. The driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. Separated feed and luminarie connections. Great for canless applications and drivers with small enclosures. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 100-347VAC Output Voltage: 170VDC Output Wattage: 20W Compatible Luminaires: NPTCBSW-22: 2'x2' LED Troffer with Selectable Lumens & CCT NPTCBSW-24: 2'x4' LED Troffer with Selectable Lumens & CCT Accessories: NEPKA-20/23LEDRTS: Ribbon Test Switch replaces the Remote Test Switch NEPKA-20LEDFPTS: Replacement Remote Test Switch
- category
- environment
- mounting
- voltage
- spec delta
- wattage: 100W → 20W
- spec →
LED High Output Industrial Remote Capable Thermoplastic Emergency Unit Ultra-bright, energy efficient, long-life White LED adjustable lamp heads provide up to 100-ft center-to center spacing with a 6-ft path of egress at 15-ft mounting height. 6.0 watt (12 LEDs x 0.50 watt) per head. Adjustable glare-free PAR-Type lamp heads with all inclusive lamp, reflector and lens assembly.
- category
- environment
- wattage
- spec delta
- voltage: 347V → UNV
- spec →
The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120-347V
- spec →
UltraLITE Model ELU (1.5kW to 14kW)
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120347
Ease of Installation and Maintenance
- category
- environment
- wattage
- spec delta
- voltage: 347V → 277V
- spec →
Virtually invisible emergency lighting. In normal conditions (stand-by) the Phantom™ series emergency light is concealed in the wall or ceiling. In case of power failure, the door of the unit rotates open 180° and exposes the emergency light. Once main power returns or at the end of the discharge period, the light turns off and the door rotates closed automatically.
- category
- environment
- wattage
- spec delta
- voltage: 347V → 12DCV
- spec →
The PATRIOT HZ comes standard with 120/277/347V input and is designed to perform in applications where the environment would punish any other unit. Lead acid battery is standard, Ni-Cd optional, provides a minimum emergency duration of 90 minutes. The solid state, high efficiency, dual rate charger provides precise float voltage control and low voltage disconnect protection.
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120V/277V/347V
- wattage: 100W → 36W
- spec →
Solais’ Emergency driver for LED light fixtures switches to emergency mode in the event of a power failure. This external driver provides easy installation, directly connecting to fixture’s AC input, allowing emergency operation for up to 90 minutes.
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120V/347V
Retrofit DMX Lighting Control Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuit count control DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!
- category
- environment
- voltage
- spec delta
- voltage: 347V → 125V / 277V / 347V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps EarthTronics
Full directory →18 rep agencies carry the EarthTronics line across 32 states. Pick your state.
Arkansas AR1 agency
- Curtis Stout, Inc.Current
Statewide
Colorado CO1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL1 agency
- FRM Lighting & ControlsCurrent
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Idaho ID1 agency
- The Reeves Company
Boise
Illinois IL1 agency
- Electrical Marketing Group
Central · Chicago
Indiana IN1 agency
- Energized Sales Company
Statewide
Iowa IA1 agency
- Perry & Associates
Statewide
Kansas KS1 agency
Statewide
+22 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.