NEPK20LEDUNVJB
Emergency LED driver kit for use with new or existing LED luminaires. The driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. Separated feed and luminarie connections. Great for canless applications and drivers with small enclosures. FEATURES Listed for field installation - UL 924 and CSA C2.22 No 141 Controlled power for predictable discharge Includes wall plate with test switch Input Voltage: 100-347VAC Output Voltage: 170VDC Output Wattage: 20W Compatible Luminaires: NPTCBSW-22: 2'x2' LED Troffer with Selectable Lumens & CCT NPTCBSW-24: 2'x4' LED Troffer with Selectable Lumens & CCT Accessories: NEPKA-20/23LEDRTS: Ribbon Test Switch replaces the Remote Test Switch NEPKA-20LEDFPTS: Replacement Remote Test Switch
Cross-References
Top equivalents — 7 across 5 brands
Compare top 3 →- spec →
The EXTLRE Series from the Lithonia Lighting® Indura® Family is an emergency remote perfectly suited for industrial, manufacturing and municipal applications. The EXTLRE is specifically designed for
- category
- environment
- voltage
- spec →
The WaveLinx Wired Universal Source Controller (SC-UN) lighting control panel sets a new standard in architectural lighting control. Each Source Controller contains individual control cards that are the industry’s only “true universal” by controlling every load type without interface or multiple cards. In addition, each panel has on board Ethernet, A/V interface, Contact Closure, DMX, voltage sensing, real-time individual circuit power metering and Phase Sense technology designed to ensure control even during individual phase failure.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 347V → 120-347V
- spec →
UltraLITE Model ELU (1.5kW to 14kW)
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120347
- wattage: 20W → 120W
Retrofit DMX Lighting Control Relay Panel Tested, complete package — low labor — mount next to circuit breaker panel to control AC power “hot” lines Reliable Panasonic latching in modules of 4 relays for easy expansion Low power consumption — no continuous relay coil current — runs cool for long life Diagnostic LEDs and internal ON -OFF test switches speed installation for testing and troubleshooting Cabinet and all components connected to high voltage are ULlisted — Electrician friendly 4, 8 or 12 circuits — 120, 240 or 277volt models available Daisy-chains for unlimited circuit count control DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!
- category
- environment
- voltage
- spec delta
- voltage: 347V → 125V / 277V / 347V
- spec →
The AFB Series from the Lithonia Lighting® Basics™ Family is a rugged construction emergency light, offering quick installation and premium standard features such as die cast aluminum construction, a
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120-347
- wattage: 20W → 2.6W
- spec →
The WaveLinx LITE Emergency Switchpack (ESP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The switchpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates into the LITE system by forming a mesh network while communicating with other LITE devices using Bluetooth protocol. Forming a Wireless Emergency allows for other devices to communicate to the ESP, providing power loss detection.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 347V → 347V/UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Nora Lighting
Full directory →3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.
Iowa IA1 agency
Statewide
Nebraska NE1 agency
Omaha
Nevada NV1 agency
Las Vegas
Wisconsin WI1 agency
- ERI / illuminateCurrent
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.