564281030
ETi’s 11” Outdoor Flush Mount is wet location rated, withstands cold temperatures down to -4°F (-20°C), and comes with integrated PIR motion sensor with three settings.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Framed in bold black and softened by an etched white diffuser, the Aperto lantern perfects outdoor lighting with elegance and edge. With TRIAC dimming, 3000K warmth, and three versatile sizes, the Aperto collection is ready to elevate your outdoor lighting.
- category
- environment
- voltage
- lumens
- CCT
- dimming
- spec →
Our new LED Vapor Tight Fixture combines durability with versatility, making it ideal for harsh environments where moisture, dust, or debris are concerns. Designed with built-in dip switches, this fixture allows easy field selection of both CCT (Correlated Color Temperature) and wattage, giving you full control to match your specific lighting needs.
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- voltage: 120V → UNV
- lumens: 830 → 13700
- spec →
Fail-Safe Vandal, Surface, Steel Construction, 8" & 12" Wide, LED
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- voltage: 120V → UNV
- spec →
180⁰ Motion Activated Twin Head LED Floodlight, 180° Detection Zone provides complete wall to wall coverage for garage and patio areas.
- category
- environment
- voltage
- CCT
- spec →
QuickLink delivers the fastest downlighting installation HALO has to offer. Installers can power up to 9 QuickLink lights on the single remote power supply, making it easy and efficient to install energy-saving smart lighting. Each fixture attaches to the low voltage cable in seconds with QuickLink Twist Connectors. Start with a QuickLink Kit which includes the remote power supply, 35-feet of Low-V cable, and 4 canless downlights. Then mix and match individual fixtures to complete the project.
- category
- environment
- voltage
- CCT
- spec →
The XAS All-Selectable Area Site series delivers powerful, high-performance illumination with exceptional flexibility for a wide range of outdoor applications. Available in 180W and 300W configurations, it provides adjustable outputs up to 46,000 lumens, with selectable 3000K, 4000K, and 5000K color temperatures and Type III, IV, and V distributions. Each fixture features versatile mounting options and a twistlock photocell for streamlined installation and control. Designed for parking lots, roadways, and large outdoor spaces, the XAS series ensures reliable, efficient, and adaptable lighting performance.
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- voltage: 120V → 120-347V
- lumens: 830 → 46000
- spec →
The Metalux AP Shoplight is an extruded aluminum integrated LED fixture that comes with a 120V grounded cord & plug. The APSHP replaces 2 or 3-lamp fluorescent shoplights or strips, and is well suited for work benches, counters, work-shops, studios, and storage areas where general task lighting is needed. The APSHP includes mounting hardware and on/off pull chain for easy installation and operation. The APSHP is UL-listed with LEDs rated to 50,000 life-hours and backed by a 3-year warranty.
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- lumens: 830 → 4000
- spec →
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V → UNV
- spec →
Square Canopy Luminaire Field Selectable Output & CCT The AMCP-SR10 is a versatile, field-customizable LED canopy light with selectable output from 3,000 to 12,000 lumens. It features CCT selection (3000K/4000K/5000K), a switchable built-in photocell, and a sensor-ready receptacle for PIR or microwave sensors. Designed for easy installation, the fixture is DLC Premium listed, IP65 rated, and available in white or bronze finishes.
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- voltage: 120V → UNV
- lumens: 830 → 3329-11697
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ETi Solid State Lighting
Full directory →26 rep agencies carry the ETi Solid State Lighting line across 43 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- C.J.S. LightingAcuity Brands
Sacramento
- Stellar Sales
Los Angeles · San Diego · Ventura
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Dans Company
Statewide
Florida FL2 agencies
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Panhandle
Georgia GA1 agency
Atlanta · Savannah
+33 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.