EUDMS1
LED CCT Controller and Dimmer- EUDCCT For EUN51 - EUN53 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. Linking Cable- EUDC51 For EUN51 - EUN56 Dimensions: 1" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 1 inch (for each side). Dimmer Switch - EUDS1 For EUN54-EUN56 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. PIR Sensor Switch - EUDPH1 For EUN54-EUN56 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. Movement Sensor Switch - EUDMS1 For EUN54-EUN56 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. Input Connector - EUDPC For EUN54-EUN56 only Dimensions: 1" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 1 inch. 24V LED Driver with 6-Way Distributor - DRV24V30W For EUN51-EUN56 5.5" x 1" x 1.75"
Cross-References
30 equivalents across 19 brands
Compare top 3 →- spec →
The AL Driver 800 is a multi-protocol, 800W driver for low voltage LED products. The input control protocols include DMX, RDM, 0-10V and DALI; and features 24V DC / PWM output. It offers maximum flexibility with your front end control preferences.
- category
- environment
- voltage
Effortlessly power your smart outdoor lighting system with our 36W Plug-In Driver, designed specifically for low-voltage landscape lighting. Delivering a steady 24V DC output, this compact driver is ideal for powering smart landscape fixtures with consistent performance and minimal installation effort. With its plug-and-play design, setup is quick and convenient, no wiring required. Simply connect to your smart-compatible landscape lights and enjoy reliable power and seamless integration with your lighting control system. Housed in a durable, weather-resistant enclosure, this driver is built to handle outdoor environments while maintaining optimal performance.
- category
- environment
- voltage
- spec →
RF Receiver – Dimming 1-10V /driver 50W, Input 230V, Output 24V More
- category
- environment
- voltage
- spec →
CBU-PWM4 is a Bluetooth controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.
- category
- environment
- voltage
- spec →
The ÉPIX Flex Boost is a plug-and-play, 24V in-line voltage booster that doubles the capacity of an ÉPIX Flex Drive output, allowing it to control a greater quantity of ÉPIX Flex 20 fixtures. This is the perfect solution for creating large-scale or extended-run lighting installations that require more fixtures than a single driver output can typically support.
- category
- environment
- voltage
- spec →
Choose Kelvix's 24v low voltage dimmers for your next project. Contact us today to learn more.
- category
- environment
- voltage
- spec →
Discover 40-200W 24VDC power supplies with up to five Lutron hi-lume drivers featuring EcoSystem technology. Enjoy 100%-0.0% dimming.
- category
- environment
- voltage
- spec →
Power your LED systems with UL Listed non-dimming electronic drivers from Acolyte.
- category
- environment
- voltage
- spec →
The Fresco Power Supply (FCS PS10) is a Class 2 low voltage power supply intended to power a single Fresco Touchscreen, or other 24VDC lighting control devices. The FCS PS10 is intended for use with
- category
- environment
- voltage
- spec →
This TCL Series X | Down Arrow outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec →
The EVO Lite Ceiling Sensor is a low profile ceiling mount sensor designed to install in a standard commercial ceiling. The sensor is provided with dual-tech operation utilizing passive infrared and passive acoustic sensing. Configured with a few simple button presses for easy set-up and adjustment, this sensor supports occupancy and vacancy in a single device. The ELCS also supports traditional 18/3, 24VDC wiring, offering the contractor multiple wiring options, and allowing the ELCS to be used with the 24VDC occupancy sensor inputs of ILC’s LightLEEDer and AP3 systems, as well as most 3rd party systems and power packs.
- category
- environment
- voltage
- spec →
PIR 360° Ceiling Mount Occupancy Sensor. The IS 3360-24 is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. With 360° of uninterrupted coverage, the IS 3360-24 provides exceptional lighting control in a wide range of spaces. IS 3360-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.
- category
- environment
- voltage
- spec →
24VDC 60W LED DRIVER Smooth flicker free dimming - Dimming range: 0-100%
- category
- environment
- voltage
- spec →
The SENSORWORX low voltage decorator wall switch provides an attractive companion wall station for a low voltage sensor system. Many spaces now require by code (e.g., ASHRAE 90.1, IECC, Title 24) manual on, partial-on, or full range dimming user operation in addition to an occupancy sensor providing automatic off control. The simplest way of achieving this is by adding a low voltage wall station that interfaces with the power pack controlling the rooms lighting. Adding a switch to a low voltage sensor system also enables users to override a space’s lighting off if necessary. Functioning as a momentary switch, this one button wall station is intuitive to use and provides pleasant tactile feedback. Visually, the unit matches the SENSORWORX line of wall switch sensors, ensuring a consistent style across multiple spaces on a project. Additionally, the single button switch has an integrated locator LED with multiple color and intensity settings. Three button dimming units have an integrated 0-10V output, intuitive raise/lower buttons, and a five LED level indicator.
- category
- environment
- voltage
- spec delta
- voltage: 24DCV → 5-24VDC
Remote LED driver for use with BEGA 24V LED luminaires. LED driver rated 25W (19 580) and 50W (19 591). The 19 580 is not dimmable. The 19 591 is dimmable, 0–10V.
- category
- environment
- voltage
- spec →
The AL Driver 400 is a multi-protocol, 400W driver for low voltage LED products. The input control protocols include DMX, RDM, 0-10V and DALI; and features 24V DC / PWM output. It offers maximum flexibility with your front end control preferences.
- category
- environment
- voltage
- spec →
24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Input Voltage: 120VAC Ouput Voltage: 24VDC Wattage: 45W Dimming: Non-Dimmable Cord Length: 6' Accessory: NATL-302W: 5" Power Line Splitter Listing: cULus Listed
- category
- environment
- voltage
- spec delta
- voltage: 24DCV → 120V/24DCV
- spec →Signal-Tech30128 (Tcl147 Rg 225 H/12 24 Vdc) Indicator Dots, Double With Hoods, Vertical, 4 In Dia, Red Green (12 24 Vdc) Led Signpartial
This TCL Series Indicator Dots, Double with Hoods, Vertical, 4 in dia, Red - Green outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec →
PIR Ceiling Mount Corridor Occupancy Sensor. With a unique, specially designed detection lens, the IS 345-24 occupancy sensor is ideal for controlling lights in long corridors or aisleways. The sensor is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. IS 345-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.
- category
- environment
- voltage
- spec →
24VDC 96W LED DRIVER Smooth flicker free dimming - Dimming range: 0-100%
- category
- environment
- voltage
Remote LED driver for use with BEGA 24V LED luminaires. LED driver rated 25W (19 580) and 50W (19 591). The 19 580 is not dimmable. The 19 591 is dimmable, 0–10V.
- category
- environment
- voltage
- spec →
AL Driver 1 is a single channel PWM dimming driver for low voltage LED products with a wired digital communication network. It can take a DC input from 6-24VDC and control protocols are DMX or 0-10V (sink and source). It can control up to 5A of single color LED product, and a manual dimming level can be set in instance
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.