ALDRIVER1
AL Driver 1 is a single channel PWM dimming driver for low voltage LED products with a wired digital communication network. It can take a DC input from 6-24VDC and control protocols are DMX or 0-10V (sink and source). It can control up to 5A of single color LED product, and a manual dimming level can be set in instance
Cross-References
30 equivalents across 21 brands
Compare top 3 →- spec →
Time Sync Hub (TSH-100/TSH-200)
- category
- environment
- voltage
- spec delta
- wattage: 960W → 525W
Effortlessly power your smart outdoor lighting system with our 36W Plug-In Driver, designed specifically for low-voltage landscape lighting. Delivering a steady 24V DC output, this compact driver is ideal for powering smart landscape fixtures with consistent performance and minimal installation effort. With its plug-and-play design, setup is quick and convenient, no wiring required. Simply connect to your smart-compatible landscape lights and enjoy reliable power and seamless integration with your lighting control system. Housed in a durable, weather-resistant enclosure, this driver is built to handle outdoor environments while maintaining optimal performance.
- category
- environment
- voltage
- spec delta
- wattage: 960W → 36W
- spec →
RF Receiver – Dimming 1-10V /driver 50W, Input 230V, Output 24V More
- category
- environment
- voltage
- spec delta
- wattage: 960W → 50W
- spec →
CBU-PWM4 is a Bluetooth controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.
- category
- environment
- voltage
- spec delta
- wattage: 960W → 144W
- spec →
24VDC, 3 Conductor Wire System
- category
- environment
- voltage
- spec delta
- wattage: 960W → 96W
- spec →
The ÉPIX Flex Boost is a plug-and-play, 24V in-line voltage booster that doubles the capacity of an ÉPIX Flex Drive output, allowing it to control a greater quantity of ÉPIX Flex 20 fixtures. This is the perfect solution for creating large-scale or extended-run lighting installations that require more fixtures than a single driver output can typically support.
- category
- environment
- voltage
- spec delta
- wattage: 960W → 200W
- spec →
Choose Kelvix's 24v low voltage dimmers for your next project. Contact us today to learn more.
- category
- environment
- voltage
- spec delta
- wattage: 960W → 192W
- spec →
Discover 40-200W 24VDC power supplies with up to five Lutron hi-lume drivers featuring EcoSystem technology. Enjoy 100%-0.0% dimming.
- category
- environment
- voltage
- spec delta
- wattage: 960W → 200W
- spec →
Power your LED systems with UL Listed non-dimming electronic drivers from Acolyte.
- category
- environment
- voltage
- spec delta
- wattage: 960W → 96W
Low profile LED Adjustable Undercabinet Light allows beam aiming for highlighting objects. High brightness with excellent color rendition. 90 ° angle tilt. Linkable up to 12ft with easy installation. Wall switch dimming, see 24V magnetic drivers under Compatible Products (sold separately).
- category
- environment
- voltage
- spec delta
- wattage: 960W → 5W
- spec →
The Fresco Power Supply (FCS PS10) is a Class 2 low voltage power supply intended to power a single Fresco Touchscreen, or other 24VDC lighting control devices. The FCS PS10 is intended for use with
- category
- environment
- voltage
- spec delta
- wattage: 960W → 14W
- spec →
This TCL Series X | Down Arrow outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec →
The EVO Lite Ceiling Sensor is a low profile ceiling mount sensor designed to install in a standard commercial ceiling. The sensor is provided with dual-tech operation utilizing passive infrared and passive acoustic sensing. Configured with a few simple button presses for easy set-up and adjustment, this sensor supports occupancy and vacancy in a single device. The ELCS also supports traditional 18/3, 24VDC wiring, offering the contractor multiple wiring options, and allowing the ELCS to be used with the 24VDC occupancy sensor inputs of ILC’s LightLEEDer and AP3 systems, as well as most 3rd party systems and power packs.
- category
- environment
- voltage
- dimming
- spec →
PIR 360° Ceiling Mount Occupancy Sensor. The IS 3360-24 is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. With 360° of uninterrupted coverage, the IS 3360-24 provides exceptional lighting control in a wide range of spaces. IS 3360-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.
- category
- environment
- voltage
- spec →
24VDC 60W LED DRIVER Smooth flicker free dimming - Dimming range: 0-100%
- category
- environment
- voltage
- dimming
- spec delta
- wattage: 960W → 60W
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- wattage
- dimming
- spec delta
- voltage: 24DCV → UNV
- spec →
The SENSORWORX low voltage decorator wall switch provides an attractive companion wall station for a low voltage sensor system. Many spaces now require by code (e.g., ASHRAE 90.1, IECC, Title 24) manual on, partial-on, or full range dimming user operation in addition to an occupancy sensor providing automatic off control. The simplest way of achieving this is by adding a low voltage wall station that interfaces with the power pack controlling the rooms lighting. Adding a switch to a low voltage sensor system also enables users to override a space’s lighting off if necessary. Functioning as a momentary switch, this one button wall station is intuitive to use and provides pleasant tactile feedback. Visually, the unit matches the SENSORWORX line of wall switch sensors, ensuring a consistent style across multiple spaces on a project. Additionally, the single button switch has an integrated locator LED with multiple color and intensity settings. Three button dimming units have an integrated 0-10V output, intuitive raise/lower buttons, and a five LED level indicator.
- category
- environment
- voltage
- spec delta
- voltage: 24DCV → 5-24VDC
Remote LED driver for use with BEGA 24V LED luminaires. LED driver rated 25W (19 580) and 50W (19 591). The 19 580 is not dimmable. The 19 591 is dimmable, 0–10V.
- category
- environment
- voltage
- spec delta
- wattage: 960W → 25W
- spec →
24V AC/DC, 2 Conductor Wire System
- category
- environment
- voltage
- spec delta
- wattage: 960W → 96W
- spec →
24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Input Voltage: 120VAC Ouput Voltage: 24VDC Wattage: 45W Dimming: Non-Dimmable Cord Length: 6' Accessory: NATL-302W: 5" Power Line Splitter Listing: cULus Listed
- category
- environment
- voltage
- spec delta
- voltage: 24DCV → 120V/24DCV
LED CCT Controller and Dimmer- EUDCCT For EUN51 - EUN53 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. Linking Cable- EUDC51 For EUN51 - EUN56 Dimensions: 1" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 1 inch (for each side). Dimmer Switch - EUDS1 For EUN54-EUN56 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. PIR Sensor Switch - EUDPH1 For EUN54-EUN56 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. Movement Sensor Switch - EUDMS1 For EUN54-EUN56 only Dimensions: 2-1/2" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 2-1/2 inches. Input Connector - EUDPC For EUN54-EUN56 only Dimensions: 1" L x 3/4"W x 5/8" H Adds to the length of the LED Undercabinet line by 1 inch. 24V LED Driver with 6-Way Distributor - DRV24V30W For EUN51-EUN56 5.5" x 1" x 1.75"
- category
- environment
- voltage
- spec →Signal-Tech30128 (Tcl147 Rg 225 H/12 24 Vdc) Indicator Dots, Double With Hoods, Vertical, 4 In Dia, Red Green (12 24 Vdc) Led Signpartial
This TCL Series Indicator Dots, Double with Hoods, Vertical, 4 in dia, Red - Green outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec →
PIR Ceiling Mount Corridor Occupancy Sensor. With a unique, specially designed detection lens, the IS 345-24 occupancy sensor is ideal for controlling lights in long corridors or aisleways. The sensor is part of the STEINEL family of German engineered, high performance commercial occupancy sensors. IS 345-24 sensors are passive infrared and respond to heat radiated from human body motion. They mount on a ceiling and turn lighting ON either automatically with occupancy or manually using a low voltage wall switch and the manual on mode of a STEINEL power pack. After a period of time where no occupancy has been detected, the sensor switches lighting OFF.
- category
- environment
- voltage
- spec →
24VDC 96W LED DRIVER Smooth flicker free dimming - Dimming range: 0-100%
- category
- environment
- voltage
- dimming
- spec delta
- wattage: 960W → 96W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Acclaim Lighting
Full directory →40 rep agencies carry the Acclaim Lighting line across 45 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR1 agency
Statewide
California CA3 agencies
- sixteen5hundredAcuity Brands
San Francisco
- OCS Lighting & ControlCurrent
San Diego
- PLP SoCalCurrent
Los Angeles · Ventura
Colorado CO1 agency
- CT Lighting & ControlsSignify (Philips)
Statewide
Connecticut CT1 agency
- illuminateCurrent
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
Georgia GA1 agency
- Ardd + WinterCooper (Eaton)
Atlanta · Savannah
Hawaii HI1 agency
- Sunburst DesignsCooper (Eaton)
Statewide
Idaho ID1 agency
Boise
Illinois IL2 agencies
Central
- The Lighting DigestCooper (Eaton)
Chicago
Indiana IN1 agency
- C M Buck & AssociatesCurrent
Statewide
Iowa IA1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kansas KS1 agency
- Mercer-ZimmermanCooper (Eaton)
Statewide
Kentucky KY1 agency
- SESCO LightingSignify (Philips)
Louisville
Louisiana LA1 agency
Baton Rouge · New Orleans · Shreveport
Maine ME1 agency
Statewide
Maryland MD1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Massachusetts MA1 agency
- Omnilite | illuminateCurrent
Boston · Springfield
Michigan MI1 agency
Detroit · Grand Rapids
Minnesota MN1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Mississippi MS1 agency
Statewide
Missouri MO2 agencies
- Mercer-ZimmermanCooper (Eaton)
Kansas City
St. Louis
Nebraska NE1 agency
- Mercer-ZimmermanCooper (Eaton)
Omaha
New Hampshire NH1 agency
Statewide
New Jersey NJ1 agency
- Illuminations Inc.Acuity Brands
Northern NJ · Southern NJ
New Mexico NM1 agency
Statewide
New York NY2 agencies
- Point Source GroupAcuity Brands
Upstate
NY City metro
North Carolina NC3 agencies
- Crown Lighting GroupAcuity Brands
Charlotte
- K.B. StephensAcuity Brands
Raleigh
- R.L. Vanstory CompanyAcuity Brands
Greensboro
North Dakota ND1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Ohio OH1 agency
- Lighting DynamicsCurrent
Cincinnati · Cleveland · Columbus
Oklahoma OK1 agency
Statewide
Oregon OR1 agency
Statewide
Pennsylvania PA1 agency
- Illuminations Inc.Acuity Brands
Philadelphia
Rhode Island RI1 agency
- Omnilite | illuminateCurrent
Statewide
South Dakota SD1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Tennessee TN3 agencies
- DesignlightAcuity Brands
Nashville
- Clear Advantage LightingAcuity Brands
Memphis
- Lighting TrendsAcuity Brands
Chattanooga · Knoxville
Texas TX5 agencies
- Peterson Scharck & AssociatesCooper (Eaton)
Houston
El Paso
- Legacy LightingCooper (Eaton)
Austin
- Texas Lighting SolutionsCooper (Eaton)
Dallas
- 2M LightingCooper (Eaton)
San Antonio
Vermont VT1 agency
Statewide
Virginia VA1 agency
- Thomas Harris & Co.Current
Norfolk · Richmond · Roanoke
Washington WA1 agency
- The Lighting GroupAcuity Brands
Seattle · Spokane
Wisconsin WI1 agency
- Mlazgar AssociatesCooper (Eaton)
Statewide
Wyoming WY1 agency
- CT Lighting & ControlsSignify (Philips)
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.