EKCL10RIC
Must be used with Canless Koto™ LED Modules IC Rated for direct contact with insulation Driver included Driver specified for 120V (Triac/ELV) or 120/277V (0-10V/Triac/ELV)
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Luminoso’s advanced emergency LED drivers deliver dependable power for any LED fixture, with 16W or 25W options providing up to 90 minutes of backup. Compact yet feature-rich, they offer one of the most versatile solutions available.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- spec delta
- wattage: 5W → 12.1W
- spec →
The Lumière Eon 303 Bollard luminaires provide architectural styling with bright, energy efficient LEDs, tailored to fit your application. The minimalist, low profile design is constructed from machined and extruded aluminum creating a sealed optical compartment. The LED bollard provides a zero uplight solution with a fixed head in 8.5W, 15.5W, or 30.6W configurations. The Eon Bollard luminaires are ideal for pathway or general ground mount illumination where greater lateral or forward throw illumination is needed. Photocell control options are available.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
Sure-Lites LED Emergency Battery Pack
- category
- environment
- voltage
- spec delta
- wattage: 5W → 14W
- spec →
The electronic “button type” photocontrol has the same features and performance of electronic twist-lock photocontrols. Energy efficiency is maintained with tight On/O ratios and “non-drift operation”. Maintenance costs are reduced through a cool running DC circuit. Life expectancy is up to three times longer than traditional heat generating thermal relay designs.
- category
- environment
- voltage
- spec delta
- wattage: 5W → 650W
- spec →
IC rated driver box with dimmable driver and includes a 16.5" quick connect wire for easy installation. Iolite can-less driver boxes require a compatible LED module and trim. Compatible LED module: NIOC-24LED Compatible trims: NIOC-2RNB, NIOC-2RNDC, NIOC-2SNDSQ, NIOC-2RPH, NIOC-4RNB, NIOC-4RNDC, NIOC-4SNDSQ, NIOC-4RPH, NIOC-4RSP, NIOC-4RTLNDC, NIOC-4RTLSLA Input Voltage: 120VAC or 120-277VAC Wattage: 12W Dimming: Phase or 0-10V Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch
- category
- environment
- voltage
- spec delta
- wattage: 5W → 23W
- spec →
The OPTOTRONIC® 35W Indoor Current Select LED drivers are exclusive to North America. This driver is economical, nonprogrammable LED drivers featuring 0-10V control interface, 120-277V universal
- category
- environment
- voltage
- spec delta
- wattage: 5W → 35W
- spec →
Lehigh's DX3 dimming system builds on the foundation of the successful DX2 system offering improved performance with a 600Mhz ARM Cortex-A8 processor and dedicated three-phase dimming controller, RDM support, USB ports, Ethernet, built-in ride-thru circuit, and a capacitive touch user interface for system configuration.
- category
- environment
- voltage
Includes 17 watt, 385 delivered lumens, 2700K LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. Mounts vertically or horizontally. 120V-277V.
- category
- environment
- voltage
- spec delta
- wattage: 5W → 17W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.