E6LRC162
cUL Listed for direct contact with insulation. Optional 90 minutes, 120/277 VAC, 60Hz, Emergency Backup. Meets Title 24 requirements. Flicker-Free Dimming. USA designed and assembled. Limited 5 year warranty. For use with ELCO Cedar™ System 6" LED Light Engines. 2 at the end of the item number denotes Generation 2. Please note Gen 2 and Gen 1 are not cross compatible.
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
The LITELUME™ LED Downlight Disk (LL-DLD) luminaire can be used in a wide variety of indoor applications ( damp rated ) for new construction or retrofit. Featuring 5 CCT’s to choose from, and comes with and without PIR motion sensor.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- spec →
Round LED low profile surface mount fixture
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120V
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- spec →
LED emergency battery pack with 7.5 or 10 watts of class 2 power
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120V/277V/UNV
- spec →
The electronic “button type” photocontrol has the same features and performance of electronic twist-lock photocontrols. Energy efficiency is maintained with tight On/O ratios and “non-drift operation”. Maintenance costs are reduced through a cool running DC circuit. Life expectancy is up to three times longer than traditional heat generating thermal relay designs.
- category
- environment
- voltage
- spec →
The Brock 3.5 Series Outdoor Wall LED is a modern and stylish light perfect for any outdoor space. It features 5 CCT selectable via toggle switch, a photocell sensor for auto on and off, and comes in standard finishes such as white, black, and oil rubbed bronze, or custom finishes upon request. This light has the option for either direct or direct/indirect illumination.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- spec →
These 5-, 9-, and 12-inch flush mount fixtures form a versatile trio, each exuding contemporary design and providing practical illumination. The 5-inch model (model FMP05M-CC only) boasts a variant equipped with a motion sensor, adding a touch of modern convenience to your lighting experience.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120V
- spec →
IC rated driver box with dimmable driver and includes a 16.5" quick connect wire for easy installation. Iolite can-less driver boxes require a compatible LED module and trim. Compatible LED module: NIOC-24LED Compatible trims: NIOC-2RNB, NIOC-2RNDC, NIOC-2SNDSQ, NIOC-2RPH, NIOC-4RNB, NIOC-4RNDC, NIOC-4SNDSQ, NIOC-4RPH, NIOC-4RSP, NIOC-4RTLNDC, NIOC-4RTLSLA Input Voltage: 120VAC or 120-277VAC Wattage: 12W Dimming: Phase or 0-10V Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch
- category
- environment
- voltage
- spec →
The NWL LED wraparound is an economical surface mount general illumination luminaire for use in commercial applications. The slender form and frosted lens create an appealing visual aesthetic. The built-in occupancy sensor and color selectable light output offer complete versatility.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- spec →
The OPTOTRONIC® 35W Indoor Current Select LED drivers are exclusive to North America. This driver is economical, nonprogrammable LED drivers featuring 0-10V control interface, 120-277V universal
- category
- environment
- voltage
- spec →
Lehigh's DX3 dimming system builds on the foundation of the successful DX2 system offering improved performance with a 600Mhz ARM Cortex-A8 processor and dedicated three-phase dimming controller, RDM support, USB ports, Ethernet, built-in ride-thru circuit, and a capacitive touch user interface for system configuration.
- category
- environment
- voltage
- spec →
“GEN 3” - LED DUAL SELECTABLE WALL PACK BUY AMERICA OPTION The BELMONT III GEN3 Series 9110G3 is traditional wall pack constructed out of a die-cast aluminum housing and tempered borosilicate glass lens. The unit comes standard with 0-10V dimming capability and three power ranges with a dual selectable platform, wattage and color temperature, on each for jobsite versatility. Options include a pre-installed photocell and Buy America Compliancy. IP65 rated.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120-277V
Includes 17 watt, 385 delivered lumens, 2700K LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. Mounts vertically or horizontally. 120V-277V.
- category
- environment
- voltage
- Signal-Tech7527 (Tcl427 Rg B172/120 277 Vac) Next Speaker | Order Here (120 277 Vac) Led Signpartial
This TCL Series NEXT SPEAKER | ORDER HERE (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec →
Stylish contemporary LED flush mount with a metal geometric pattern accent. Full white acrylic diffuser on side and bottom. Available in two finishes and three sizes. Motion sensor and batter back-up options.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120-277V
- spec →
Wall sconce series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and mounting plate. - Micro-prismatic patterned flat, tempered silk-screened soda-lime glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - High-efficiency COB, combined with an optimized passive cooling system, provides a long LED life. - Internal specular reflector coated with 5-layers of PVD 99.98% pure aluminum providing >95% reflection. - Single (TECH) or dual (DOUBLE TECH) light emission. - IESNA Type I light distribution. - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver. - Junction box mounting plate included (for 4" octagon box only, provided by others). - Consult factory for dimming options, custom finishes (please specify RAL color), and non-cataloged CCT (Kelvin) options. - Product meets Buy American Act requirements within ARRA. - 5-year warranty.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120-277 V (50 / 60 Hz)
- spec →
The LightLEEDer controller is the key to a powerful, dependable, flexible and energy efficient lighting system. LightLEEDer panels come with our new Reliant40 relays which feature a superior four contact design -- the first true 40Amp lighting relay. Reliant40 relays come in 1-, 2- and 3-pole configurations in a robust breaker-style body. LightLEEDer panels range in size from 4 to 64 relay capacity and are equipped with CAT-5 RJ45 connectors for LightSync data line devices and interconnecting panels. Panels include a keyboard and LCD screen, along with USB and TCP/IP connections for easy programming with our free LightLEEDer Pro Software. Add-on modules are available for connecting to BAS, theatrical, or security systems.
- category
- environment
- voltage
- spec →
120~277V in, 60W Constant Voltage LED Driver. Driverenclosureincluded.
- category
- environment
- voltage
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120-277V
- spec →
Pre-engineered UL 508A automation control panels with DIN rail, power supply, circuit protection. Ready for your automation controller.
- category
- environment
- voltage
- spec →
TCS WiFi Smart Transformer: 150W/300W, stainless steel, smart app-controlled, 3 zones with dimming/scheduling, continuous power Smart Zone, 10-year warranty.
- category
- environment
- voltage
- spec delta
- voltage: 120V/277V → 120V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.