E3LK77ICAD-EM7
IC Airtight for direct contact with insulation. Easy-to-Remove driver. Optional 90 minutes, 120/277 VAC, 60Hz, Emergency Backup. Flicker-Free Dimming. USA designed and assembled. Limited 5 year warranty. For use with ELCO Koto™ Architectural LED Light Engines (ELK19, ELK21, or ELK24 Series).
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- spec →
The electronic “button type” photocontrol has the same features and performance of electronic twist-lock photocontrols. Energy efficiency is maintained with tight On/O ratios and “non-drift operation”. Maintenance costs are reduced through a cool running DC circuit. Life expectancy is up to three times longer than traditional heat generating thermal relay designs.
- category
- environment
- voltage
- spec →
IC rated driver box with dimmable driver and includes a 16.5" quick connect wire for easy installation. Iolite can-less driver boxes require a compatible LED module and trim. Compatible LED module: NIOC-24LED Compatible trims: NIOC-2RNB, NIOC-2RNDC, NIOC-2SNDSQ, NIOC-2RPH, NIOC-4RNB, NIOC-4RNDC, NIOC-4SNDSQ, NIOC-4RPH, NIOC-4RSP, NIOC-4RTLNDC, NIOC-4RTLSLA Input Voltage: 120VAC or 120-277VAC Wattage: 12W Dimming: Phase or 0-10V Accessories: NCA-EW-4: 4' Quick Connect Extension Cable NCA-EW-10: 10' Quick Connect Extension Cable NEPK-23LEDUNV: 23W Emergency LED Driver with Remote Test Switch
- category
- environment
- voltage
- spec →
The OPTOTRONIC® 35W Indoor Current Select LED drivers are exclusive to North America. This driver is economical, nonprogrammable LED drivers featuring 0-10V control interface, 120-277V universal
- category
- environment
- voltage
- spec →
Lehigh's DX3 dimming system builds on the foundation of the successful DX2 system offering improved performance with a 600Mhz ARM Cortex-A8 processor and dedicated three-phase dimming controller, RDM support, USB ports, Ethernet, built-in ride-thru circuit, and a capacitive touch user interface for system configuration.
- category
- environment
- voltage
Includes 17 watt, 385 delivered lumens, 2700K LED module. Dimmable with most LED compatible ELV, TRIAC and 0-10V dimmers. Mounts vertically or horizontally. 120V-277V.
- category
- environment
- voltage
- Signal-Tech7527 (Tcl427 Rg B172/120 277 Vac) Next Speaker | Order Here (120 277 Vac) Led Signpartial
This TCL Series NEXT SPEAKER | ORDER HERE (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
Wall sconce series. Fixtures consist of: - Multi-step powder-coat painting process, optimized against UV rays and corrosion. - Copper-free precision die-cast aluminum housing and mounting plate. - Micro-prismatic patterned flat, tempered silk-screened soda-lime glass diffuser. - Custom molded, anti-aging gasket(s). - Stainless steel external hardware. - High-efficiency COB, combined with an optimized passive cooling system, provides a long LED life. - Internal specular reflector coated with 5-layers of PVD 99.98% pure aluminum providing >95% reflection. - Single (TECH) or dual (DOUBLE TECH) light emission. - IESNA Type I light distribution. - Input voltage: 120-277 V (50 / 60 Hz), integral 0-10 V dimming driver. - Junction box mounting plate included (for 4" octagon box only, provided by others). - Consult factory for dimming options, custom finishes (please specify RAL color), and non-cataloged CCT (Kelvin) options. - Product meets Buy American Act requirements within ARRA. - 5-year warranty.
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.