E2LK94ICA
IC Airtight for direct contact with insulation. Easy-to-Remove driver. MAX. 35° adjustability. Optional 90 minutes, 120/277 VAC, 60Hz, Emergency Backup. Flicker-Free Dimming. USA designed and assembled. Limited 5 year warranty. For use with ELCO Koto™ Architectural LED Light Engines (ELK21 and ELK24 Series). Optional Accesory: 2″ Koto™ Housing Ceiling Extension Collar
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
• Made of rugged aluminum alloy with a glass lens • Projects light in both directions, illuminating the wall above and below • Durable and suitable for wet locations • Features a matte black finish and modern design • Includes a pre-installed dusk-to-dawn light photocell sensor for energy-saving operation by turning off lights during daytime • Operating Temperature : -4 deg.F to +104 deg.F / -20 deg.C to +40 deg.C
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
- spec →
The LITELUME™ LED Downlight Disk (LL-DLD) luminaire can be used in a wide variety of indoor applications ( damp rated ) for new construction or retrofit. Featuring 5 CCT’s to choose from, and comes with and without PIR motion sensor.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
The LiteKeeper 4 stand-alone lighting control panel is an all inclusive premium grade system for applications that would traditionally use a time clock in conjunction with contactors. Control up to four 20A circuits. The LiteKeeper 4 has more standard features than any other stand-alone panel on the market to create a state of the art stand-alone lighting control system.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 277V/UNV
- spec →
The HALO Home Smart Motion Floodlight incorporates the system's wireless Bluetooth technology into a durable, twin head design for an advanced outdoor lighting solution built for high performance. Features configurable settings for both the motion sensor and floodlight, including sensitivity, duration and scene control, as well as grouping, scheduling, dimming, and white color tuning. The motion sensor works as a HALO Home controller that can be commissioned to control the light it's attached to or an entire Group of HALO Home-enabled lighting for increased motion-activated security. This unit does not require a hub or internet service and can be wirelessly controlled by a HALO Home Dimmer or smartphone/tablet. White - MST20C18W Bronze - MST20C18B (Do not use in combination with non-HALO Home dimmers)
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- spec →
The electronic “button type” photocontrol has the same features and performance of electronic twist-lock photocontrols. Energy efficiency is maintained with tight On/O ratios and “non-drift operation”. Maintenance costs are reduced through a cool running DC circuit. Life expectancy is up to three times longer than traditional heat generating thermal relay designs.
- category
- environment
- voltage
- spec delta
- wattage: 18.9W → 650W
- spec →
The XTR Driver 8000 is a key component in the XTR Link System, allowing for maximum runs of up to 700’ in series with XTR Link compatible products. It is quite flexible on control input protocol, accepting DMX, RDM, DALI, 0-10V Sink (noted as 1-10V), and 0-10V source. It features a 220V-277VAC input, an onboard display
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 277V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.