E2L13F
Dimmable ELV, Triac or 0-10V depending on driver used. Same LED light engine for 850 and 1100 lumens (see housings) cUL Listed for Direct Contact with insulation Works with compatible ceilings up to 1¼″ Height allows for use in ceilings with under 5" depth. Ceiling thickness can be reduced from fixture depth. 38° Standard beam with optional 28° and 60° Wet Location Rated for Indoor and Outdoor Use cUL listed, Meets California Title 24 JA8-2016-E and Energy Star standards. Life Span 50,000 Hours L70 U.S. Pat. 10,125,959
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- spec →
4" Deep regressed cone reflectors optimize visual cut-off. Iolite can-less trims require a compatible LED module and driver box. Compatible LED module: NIOC-24LED Compatible Driver Box: NJCB-12 Finishes: BB: Black Reflector / Black Flange HZMPW: Haze Reflector / Bright White Flange MPW: Bright White Reflector / Bright White Flange WW: Warm White Reflector / Warm White Flange Accessories: NIO-AS: Translucent/Opaque Deco Collars NIO-HC: Hex Louver NF-R124: Universal New Construction Frame-In NFC-R413: New Construction Frame-In with Collar
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 8.6W → 23W
- spec →
Trimless recessed or surface mount linear strip light with 7W/ft or 10W/ft. Frosted or prismatic lens for glare control. Touch switch and occupancy sensor switches available. Customizable length. Easy to install with friction spring clips. Compact sizing, suitable for lighting up small spaces, such as coves, wall slots, shelves & cabinets.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- spec →
USE OF PRODUCTThe 3" PRIME Wall Wash is a small aperture fixture with shallow height that may be used in residential and commercial applications. Die cast trims with an assortment of color temperatures, optics and dimmable drivers. May be used in plaster, wood and marble ceilings.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 8.6W → 32W
- spec →
The LITELUME™ LED Downlight Disk (LL-DLD) luminaire can be used in a wide variety of indoor applications ( damp rated ) for new construction or retrofit. Featuring 5 CCT’s to choose from, and comes with and without PIR motion sensor.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 8.6W → 19W
LX1.8 architectural linear luminaire housing from 1.8” wide aluminum extruded profile, available in 2, 4, and 8-Ft length with White, Black finish; integral driver, frosted polycarbonate lens.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 8.6W → 80W
- spec →
The Corelite JAYLUM merges affordability and performance in this timeless direct/indirect pendant. The JAYLUM is designed to accompany almost any décor with clean lines and a slim profile. The J2 LED series provides up to 93% downlight using a single LED module to efficiently deliver light to the task at hand. The J3 LED series offers a wide optical distribution with up to 85% uplight and industry-leading performance to meet increasingly stringent building energy requirements. Two lens options, integral daylight/occupancy sensors, integral emergency battery packs, Fifthlight DALI addressability, companion wall-mount and sconce allows this fixture to meet all of your specific project needs. Best of all, the JAYLUM incorporates economically engineered steel-construction and contractor-friendly installation features for which Corelite is known!
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 1100 → 4075
- wattage: 8.6W → 87.7W
- spec →
Fail-Safe HVSL4 combines beauty and robustness in a small scale design. Steel end caps and steel body provides strength while an extruded linear ribbed polycarbonate lens obscures the LED image and spreads light evenly. Ideal for areas where the need for aesthetics and protection from vandalism are critical. Perfect for schools, mental health facilities, hospitals, corridors, dormitories, public rest rooms, common areas, and transit stations
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
Interior architectural field selectable cove lighting
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- lumens: 1100 → 378
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps ELCO Lighting
Full directory →2 rep agencies carry the ELCO Lighting line across 2 states. Pick your state.
Hawaii HI1 agency
Statewide
Nebraska NE1 agency
Omaha
Line cards are directional — confirm coverage with the agency before routing a spec.