HeyeBeamPowered by Heye Lab
CrestronControls

DIN-2LEDPWM8

2 Channel RGBW LED Dimmer, DIN Rail Mount

family: DIN-2LEDPWM8wattage: 100dimming: PWMhousing material: polycarbonate↗category corrected: general_lighting→controls (controls-only manufacturer)
Spec sheet →

Cross-References

Top equivalents — 4 across 4 brands

Compare top 3 →
  • AcolyteDIMMINGCONTROLMODULEweak

    Acolyte carries the SleekTone Dimming Control Module from AmbienTech, which facilitates connections between dimming systems and LED drivers.

    • category
    • environment
    • wattage
    • dimming
    spec →
  • Day-BriteISLRNWweak

    The NWL LED wraparound is an economical surface mount general illumination luminaire for use in commercial applications. The slender form and frosted lens create an appealing visual aesthetic. The built-in occupancy sensor and color selectable light output offer complete versatility.

    • category
    • environment
    • wattage
    • housing
    spec →
  • EarthTronics11846weak

    EarthTronics 4FT LED Vapor Tight features NFS, NEMA 4X and IP66 wet location rated Color and Wattage Selectable Vapor Tight LEDs designed for faster installation in commercial and industrial lighting applications. Ideal for food processing areas, commercial kitchens, cold storage, parking garages, walkways, stairwells, utility areas, under canopy, outdoor retail and other wet, dusty, and dirty environments, the Color and Wattage Selectable Vapor Tight LEDs are available in multiple color and watt combinations. The new Vapor Tight LEDs offer the choice of three temperatures (3500K, 4000K and 5000K) and feature a high 80+ CRI. Both the light color temperature and the lumen level can be set at the time of installation with a switch located on the LED module holder plate to ensure the proper lighting for improved visual acuity and application requirements. All the fixtures accept 120 – 277-volt AC power supply and are equipped with 12VDC auxiliary power prewired for easy installation of advanced lighting controls. In addition, they have a 0-10 volt dimming standard and will perform in temperatures ranging from -40°F (-40°C) to 104°F (40°C). To meet specific area energy codes an internal multi-function sensor can be installed and then operated with a remote test control to set occupancy, daylight harvesting and dim to off functions. An emergency back-up driver is available. Designed for simple installation, the vapor tight features a UL 94 5VA polycarbonate housing that allows the wires to be connected directly inside of the housing without internal junction box or silicone conduit. The lens and LED module board are both integrated. The gasket polycarbonate housing has stainless steel latches with a sealed lens that meets IP66-rated requirements for wash down and dusty conditions. The fixtures are suitable for applications that may M require wash down and/or experience cold temperatures or moderate impacts. DLC® listed.

    • category
    • environment
    • wattage
    • housing
    spec →
  • LuminiiL3D0-96W24V-Uweak

    3-wire constant voltage LED driver. Input signal: 120-277 VAC, 0.92-0.40 A, 50/60Hz. Output signal: 24 VDC, 4 A, 96W max.

    • category
    • environment
    • wattage
    • dimming
    spec →

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →

Local Reps

Who reps Crestron

Full directory →

43 rep agencies carry the Crestron line across 48 states. Pick your state.

+38 more states in the full directory →

Line cards are directional — confirm coverage with the agency before routing a spec.